-
What's Next?
No files in this category yet.
Files From Subcategories
-
Full House (Williams 1966).vpx
By drinkcristal
I was inspired to create this table from some random youtube clips that came up on my feed and it looked like a fun table. I own a Klondike so it was good to have a go at another table with poker machine reels.
The artwork and assets are sourced from many different sources. IPDB, youtube, some older tables on other sites etc. Once I made the b2s I needed to press on and get a total game working.
My graphic design skills are rubbish so a close eye will see where I have had to stitch things together. I have tried to make the physics of the gameplay close to what I saw on youtube but it would be good if someone with more skill in this area can provide feedback. (or owns the table and knows how it plays)
In general, I would like to thank the entire community for having great tables to play and produced many realistic assets that can be used for new creations. (I love the chrome flippers that I borrowed from tradewinds)
This table is made on 10.8 latest candidate. It auto detects VR, DT, FS, FSS and should use the b2s when in DT or FS modes.
B2S maxes at 9 credits for display so just be aware. The machine counts to 30 but the b2s display is limited.
There are some volume adjustments in script that are intuitive. You can turn the smart flippers on or off if that helps with the physics.
A major point to note 🙂
I have tried to mimic the game as much as possible. Like early Williams table, when you power the machine on, nothing lights up nor works. You need to press the left flipper to "power" the table. Same is true for this game.
Press left flipper - game lights up
There after, the game should run as normal.
Tilt and the games over. You can turn that off so it tilts the ball in play but that is not how the original game worked.
I have also used the schematic to mimic the following:
Match - (imitating a Match unit on the real machine)
Alternatve Specials - (uses Match Unit also)
Dealershand (Nines) - (uses the 10's reel to determine)
Dealershand (3 of a kind) - (uses Match Unit also)
Any feedback welcome. Any fine tuning adjustments that can be recommended, please place in the comments
I hope you enjoy.
917 downloads
-
1.6.thumb.png.7e83004033a44824cac797dcc207c08a.png)
F-14 Tomcat (Williams, 1987) Hanibals 4k Mod
By Hanibal2001
Special thanks for all the previous creators:
flupper1 - plastic ramp, wire ramps, playfield shadows, primitive flippers
assassin32 - script, playfield scan, table template
ganjafarmer - plastics redraw, lighting, physics
Thanks to wrd1972, vogliadicane, senseless, Nemo, bjschneider93, bassgeige
I have update the lights,
upscale and edit the playfield.
Upscale and change some plastics.
Add music to the table.
Have fun with it!
1776 downloads
-
Five nights at freddy(FNAF)
By remdwaas1986
THIS IS A JUMP SCARE TABLE, IF YOU HAVE ANY HEART CONDITIONS PLEASE BE CAREFULL!
Happy Halloween! enjoy and please rank the table and leave a comment behind.
Thanks for all the reactions, it really cost me a lot of time to build this or any table.
First of all the round of thanks:
Thanks to drjameshouse for helping and writing the code together
Thanks to jpsalas for helping the kicker issue
Thanks to godisnothere for the topper and wheels(included in the zip)
Thanks to uers1983 for his lovely wheels(included in the zip)
Thanks to tartzani to help me with the light issue
Thanks to Hauntfreaks for his eye ball image, and solving the memory leak issue(my textures where to big 4096x4096 is the max you can use)
Thanks to Tomato for helping with the tube in blender
This is a original table with all the files included in the table. Modding only by approval.
With 1,3 and 5 million you will get an extra ball
This table started of as a request from gamemodder, so he could learn to build a table. Then he quit and i tried it with snapstick but he was to busy. Then i asked a friend and he also quit. Luckily i found drjameshouse and he helped with the code and things on the table to get familiar with vpx. We where on a time pressure, because i wanted to release the table before halloween.
RULES:
this table has a day and night modus. You start in the day 6:00 the time will move till you reach 00:00 there will be an intro and the scary part begins. Can you survive the night?
Day modus
the kickers for kitchen and stage are available(no time restriction, it will stop the day timer and after completing the items, the daytimer will be turned on again).
Kitchen:
collect 3 pizza slices
collect 3 Milkshakes
collect 3 Presents
collect 3 pizza boxes
collect 3 cans
Stage:
collect 3 Guitars
collect 3 Monitors
collect 3 Flashlights
collect 3 voicerecorders
collect 3 Microphones
Targets:
hit F-U-N-N-Y
Night modus
to escape the night hit and complete the targets: N-I-G-H-T. There will be a random timer so Freddy and his friends will jump scare you and then you will loose the ball. If you loose the ball in the night, you will have to start over the day just like in FNAF.
add the end of the ball you will get an extra target bonus and bumberhits bonus
How many nights can you survive?
2101 downloads
-
Flash Gordon (Bally, 1981) SoundMOD Hybrid (DT-FS-FSS-VR)
By xenonph
Flash Gordon (Bally 1981) SoundMOD Hybrid (DT-FS-FSS-VR) v2.2
by Rothbauerw, Bord, Blacksad, VPW Team, Xenonph
(ATTENTION!!!: READ THE "READ ME!!! VERY IMPORTANT!!!" TEXT FILE INCLUDED WITH PACKAGE)
(THIS MOD WAS MADE USING THE VPU PATCHER TOOL)
FIND HERE....
https://vpuniverse.com/files/file/2581-vpuremix-system-vppatching-system-vpx-only/
(YOU NEED TO DOWNLOAD THE ORIGINAL TABLE AND THE PATCHER TOOL TO APPLY THIS PATCH!)
I first would like to thank Rothbauerw for giving me permission to mod his amazing table.
Although he previously gave me permission to mod his old version table many years ago, I personally asked him again for permission to mod his new version!
I also would like to thank Bord, Blacksad, and the VPW Team, and anyone else who had an unseen helping hand in this creation!
I used his Flash Gordon (Bally 1981) v2.02 for this mod.
Find here...
https://vpuniverse.com/files/file/11584-flash-gordon-bally-1981/
I basically moved all of the old sound mod sounds, over to the new table!
There are a few improvements and changes, compared to what I did on the old sound mod.
I hope you enjoy!
IF YOU LIKE THIS MOD, THEN PLEASE THANK THE ORIGINAL AUTHORS ON THEIR DOWNLOAD PAGE!
THEY WORKED HARD TO MAKE THIS CREATION, AND THEY DESERVE ALL OF THE CREDIT!
IF YOU HAVE ANY PROBLEMS APPLYING THIS PATCH, SEND ME A MESSAGE ON PINBALL NIRVANA SITE.
************************************
(Info on Rothbauerw's download page)
This update includes:
Scanned playfield and plastics
Bord blender render
Blacksad backglass art
The latest physics: nfozzy physics, flipper tricks, rubber dampener, rubberizer, drop targets, and stand-up
Fleep sound package
VPW insert lighting
VPW dynamic ball shadows (with performance fix that should allow use in VR)
VR Room
Credits:
Physics, sound, scripting and VR: rothbauerw
Blender: Bord
Backglass: Blacksad
The VPW team for support and testing
************************************
367 downloads
-
Fiction Pup Pack
By Gman77
All Logos, Copyrights and Trademarks are property of their respective owners.
PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!
VIRTUAL PINBALL ALWAYS HAS AND ALWAYS WILL BE FREE TO ANYONE!!!!
Use VPX 10.8 OR 10.74
Delete the old pup for this as well as the old pup table file, they are not compatible here.
Major Thanks to @marty02 for making this amazing table we love. It's amazing in every way, thank you!
Major Thanks to @ZandysArcade for the sweet overlay he made for this! Looks amazing! Thank you!
Major Thanks to @hauntfreaks for letting me use a .mp4 version of his backglass/fulldmd, to blend with the pup! Thank you!
Major Thanks to @Nevvyboy for making a new instruction card for the table when he found out I was redoing the pup! Thank you!
Major Thanks to anyone who makes new media that can work with the pup later!
New version has had ALL vids reprocessed/audio normalized and cropped and a few new clips added. Texts redone.
Table file recoded from marty02's most recent table file update. Hence it has new 9.3 second ball losts.
All vids nailbusted to 1080p by default.
Must use the included table file, it has pupevent specific for this pup added to it.
The only "sound manager change" to this table file is the "vo_pulp" movie quote callouts have been muted
Pup volumes may have to be adjusted for personal preference within the "pup pack editor triggers screen"
Major Thanks to @merlinrtp for figuring out how to change ball lost delay on tronclassic rom pup.... making a new project green lighted!
End of Line
All Logos, Copyrights and Trademarks are property of their respective owners.
PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!
VIRTUAL PINBALL ALWAYS HAS AND ALWAYS WILL BE FREE TO ANYONE!!!!
475 downloads
-
FireballXL5
By Sir_Random
DOF support added by @MauiPunter
New Lighting setup by @hauntfreaks
incl. Full DMD B2S by HauntFreaks, B2S by haggi
Fix for HSScore(1) loading issue.
This is my first table, based on my childhood favourite show, Fireball XL5
I have been making games for many years, but this was the most enjoyable project ever for me. I hope I did Fireball XL5 justice, and managed to convey a feel for the show with 'countdown' hurry ups and show related mission modes.
It's meant to be fun and uplifting, but you can totally blow it up by completing the modes and Wizard mode.
Features:
Full FlexDMD including 2 video games
4 Main modes + Wizard mode/Party Time
2 Multiballs
+ Numerous hidden features
Works with 10.7 & 10.8
Updates:
V1.01 has realistic lighting by hauntfreaks & DOF support by MauiPunter
V1 still has the original '5 year old's bedroom' lighting
Come for the pinball, stay for the wonderful music of Barry Gray.
Enjoy!
1935 downloads
-
Fish Tales VPW
By VPinWorkshop
"Gone fishin', leave a message."
The Visual Pinball Workshop proudly presents, Fish Tales by Williams!
This table has been in the VPW development queue since December 20th, 2020. Since then, there have been many contributors. We thank them all!
VPW Fishermen
--------------------------
Blender Toolkit: Benji, fluffhead
Physics/Scripting: rothbauerw, fluffhead
Artwork: Brad1X (playfield, apron, and decal redraws), Hauntfreaks (backglass)
VR Room: Rawd and DaRdog81
VR Backglass: leojreimroc
Blender advice, Flipper and Plastic Ramp rebuilds: tomate
Editor and scripting assistance, tuning and clean-up: apophis, Sixtoe
Physics calibrations, flipper measurements, and testing: JLou
Other contributions: sheltemke, iaakki, Schlabber34, bord, redbone, Steely
3D modeling and assets (plastics and playfield scans and touch-up): g5k
3D modeling: 3rdaxis
Artwork assistance: EBisLit
Playfield Scan: Clarkkent
Table references: Kevv
Previous authors: Pinball58, Skitso
Testers: Studlygoorite, PinstratsDan, geradg, Primetime5k, DGrimmReaper, Wylte, RIK, somatik, passion4pins, JLou, Dazz, BountyBob, HauntFreaks, redbone, DarthVito, Robby King Pin, CalleVesterdahl, Colvert, HayJay, TastyWasps
---
This table is pushing the limits. If you experience performance issues, adjust the refractions probes in the Tweak Menu if you have VPX 10.8 RC1 or later, or follow the recommendations in the Performance Tip PDF attached to the download.
https://github.com/vpinball/vpinball/releases
---
All options are in the Tweak Menu (F12):
- Refraction Probe Settings (Available in 10.8 RC1 or later) - used for performance tuning, if needed
- Ramp Cover Decals (enable/disable ramp cover decal mod)
- Playfield Reflections Options (enable/disable static or dynamic reflections)
- Side Blade z-scale for cabinet users
- VR Room options (why would anyone want anything other than the fishing scene?)
- VR Back Box topper toggle
- VR Ambient sound options
- View VR Room in desktop
- Outlane Difficulty
- Flipper Tricks Difficulty
- Volume Dial
- Ball Roll Volume
- Ramp Roll Volume
- Table Brightness
- Ball Brightness
- LUT Options (not applicable in Fishing Scene)
---
There is a DMD rom text size patch available here if you want it;
Also check out Fish Tales Altsound package by idigstuff
5826 downloads
-
Futurama (Original 2024)
By Wizball
Help your favorite intergalactic group of friends make all their deliveries across the universe!
PinUp Player 1.5 beta is required: https://www.nailbuster.com/wikipinup/doku.php?id=pinup_upgrade_v15
Don't forget to run the appropriate BAT file in the futurama pup pack directory for your particular screen setup.
Those who have cabs with RealDMDs or SlimDMDs can enable FlexDMD in the options at the top of the script.
Based on the VPW example table by 3rdaxis, apophis, Benji, Fleep, Flupper, iaakki, nFozzy, oqqsan, Rothbauerw, Sixtoe, wrd1972, Wylte
11828 downloads
-
Four Seasons (gottlieb 1968)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Great B2s from Wildman!
Adjustments made:
- Playfield color correction and touch-ups
- bumpers
- added primitive to the base of the bumpers and lighting
- lighting
- metals
- screws
- new pov
- target adjustments
- flippers adjustment
- new top tabs
- red pins (IPDB)
- other small touches
Loserman Description:
Four Seasons by Gottlieb
Playfield redraw by me. If you think it sucks, delete the table - lol
Plastics culled from images on the internet
Uses metal bracket primitive by Cyberpez (thank you for it, and to Bord for his version as well).
Uses Bord's new primitive flippers - these look so nice.
ZIP includes B2S
282 downloads
-
Flipper Pool (Gottlieb 1965)_Teisen_MOD Ext2k VRROOM
By Ext2k
Hi, Just I only created the VR ROOM for this conversion.
Enjoy
119 downloads
(0 reviews)0 comments
Updated
-
Flipper Pool (Gottlieb 1965)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
- Playfield color correction
- small improvement of plastics
- color correction of playfield lights
- cap bumpers colors corretion
- lighting
- metals
- screws
- new green guides
- new pov
- target adjustments
- new chrome posts
Loserman Description:
Gottlieb's Flipper Pool - 1965
This is the add-a-ball version of Bank A Ball
Manual ball lift table - Start Key or "A" will lift balls to plunger during game
Artwork by GNance including wheel
VPX 10.5 - I don't do betas
290 downloads
-
(Backglass).thumb.png.c913d351490fd5f2bbf189535babfadc.png)
Fantomas - Louis de Funes - French Edition 2023 (Icepinball, VLive)
By VLive
Salut, Avec l'aimable permission d'Icepinball, j'ai réalisé cette version française de la table VPX de Fantomas.
Amusez-vous bien !
295 downloads
(2 reviews)0 comments
Updated
-
Flipper Fair (Gottlieb 1961)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
- Playfield color correction
- color correction of Playfield lights
- new apron back
- new tabs, with colors like the real table (IPDB)
- new cap bumpers
- lighting
- metals
- screws
- flippers adjustment
- new posts in colors like the real table (IPDB)
- addition of posts next to the passive bumpers (IPDB)
- correction of the white metal on the upper gate
- I'm definitely forgetting something...lol
Loserman Description:
Flipper Fair (Gottlieb 1961)
https://www.ipdb.org...hine.cgi?id=894
Build/Coding by Loserman76
Images by GNance
With my manual ball lift tables, you can press whatever key you have configured to start a new game (typically a "1") or the "A" key to load the ball to the shooter lane
Alternatively, in the options menu (when a game is not in play, hold the left shift key for 3 seconds to bring it up) you can set it to auto-lift the ball
310 downloads
-
-
Fathom (Bally 1981) w VR Room
By UnclePaulie
Version 2.0 by UnclePaulie 2023
This version was done with my Medusa table and other recent Bally tables as a baseline to start, since they were Bally 1981. Built everything ground up from there. Used a few prims and images from Goldchicco's prior table, as well as some logic. I used EBisLit's playfield as a baseline, and Redbone did lots graphics updates to that playfield, as well as the plastics, targets, apron, flippers, and many others. The VPW team did lots of testing and recommended that I use Circus's VR room as an option, as it has you playing on the ocean floor with fish swimming around you, so his very cool environment is also included, and is the default environment for VR users. Thanks to Circus for permission!
Included in this Version 2.0 is Hybrid VR/desktop/cabinet modes, new playfield, VPW physics, flipper tricks, dynamic shadows, Fleep sounds, Lampz, 3D inserts, new baked general illumination lighting and AO shadows, sling corrections, drop and stand-up targets, saucer, playfield meshes, various primitives, etc. Significant time was spent on researching online videos, to ensure accuracy of shots, ball drops, kickouts, and overall playability. I also created a desktop backglass with a lighting effect, as well as the VR backglass (image from Hauntfreaks) and other VR options. There are also some performance improvements and I added a playfield mesh for the playfield, so there's a realistic bevel in the saucer.
Thank you to EBisLit for the playfield image, and Redbone for upscaling and cleaning up the all the images. Thank you to Circus for the ocean VR environment. And thank you to the VPW team for testing, especially redbone, apophis, bountybob, dgrimmreaper, studlygoorite, pinstratsdan, wylte, trytotilt, bietekwiet, astronasty, and hauntfreaks.
There are several options in the script. Including VR rooms and environments, ball brightness, ocean environment sounds, and LUT lighting options. The LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. The Dip Switch settings are done in the script and are hardcoded. IF... you want to change them, there's a setting in the script to manually override that, and then use F6 during gameplay to bring up the Dip Switch setting.
This is a hybrid table done in VPX 10.74 (but will run fine in 10.8), and I have code in here to automatically choose between VR, desktop, and cabinet. Additional VR options in the script include three VR environments, a VR clock, a topper, posters, and settings for dynamic shadows if you experience a performance hit.
Thanks again to the VPW team for all the testing, Circus for the Ocean VR environment, and Redbone for all the graphics enhancements!
2150 downloads
-
Free Fall (Gottlieb 1974)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
- lighting and playfield lights
- adjust targets
- new POV
- plastic contrast and transparent edges
- bumpers color correction
- new metals
- screw adjustment
- new white plastic guides
- adjustment of target flags
Description of Loserman76:
Build/Coding by Loserman76
Artwork by GNance
hauntfreaks - newer postit note images, environment file, lighting information, primitives
BorgDog - his tables that helped me to understand more with VPX - and I probably lifted a primitive or 2 from them as well
GNance - score motor tweaks to behave like a real EM, PostIt routines, Options menu
JPSalas - gameroom backdrop
Pinuck - Gottlieb chimes and score motor routines
Arngrim - DOF coding and information
when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option
in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" for coin and "4" for coin and auto-start game to simulate 3 coin slots
Shadow config settings:
Look for these 2 lines near the beginning of the scripting:
Const ShadowFlippersOn = true
Const ShadowBallOn = true
change to false if you want either of the shadows not showing on your tables
235 downloads
-
Fun Land (Gottlieb 1968)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
- lighting and playfield lights
- adjust targets
- new POV
- plastic contrast
- playfield color adjustment and small touches
- adjust PF buttons color and animation
- bumpers color correction
- correction of spinners (correct animation)
- new metals
- screw adjustment
link to Wildman's new B2S!
Description of Loserman76:
Fun Land
Build/Coding by Loserman76
Artwork by GNance
hauntfreaks - newer postit note images, environment file, lighting information, primitives
BorgDog - his tables that helped me to understand more with VPX - and I probably lifted a primitive or 2 from them as well
GNance - score motor tweaks to behave like a real EM, PostIt routines, Options menu
JPSalas - gameroom backdrop
Pinuck - Gottlieb chimes and score motor routines
Arngrim - DOF coding and information
when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option
in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" for coin and "4" for coin and auto-start game to simulate 3 coin slots
Shadow config settings:
Look for these 2 lines near the beginning of the scripting:
Const ShadowFlippersOn = true
Const ShadowBallOn = true
change to false if you want either of the shadows not showing on your tables
220 downloads
-
Fly The (1986) Edition 2023 Reskin (Iceman 2023)
By icepinball
Fly The (1986) Edition 2023 Reskin (Iceman 2023)
Jeff Goldblum, Geena Davis and John Get 1986 in THE FLY
Loosely based on George Langelaan's 1957 short story of the same name and the 1958 film of the same name, The Fly
I have added a small DMD PUP folder to it (freefall)
just put the folder ..... freefall ....... in the PUPVideos folder at your Cabinet (Alias) ............. (freefallp, freefall)
All logos, characters, copyrights and trademarks are the property of their respective owners
a special thanks to GauGau for the AI upscaling of the graphics
a small PUP version with a great DMD video by PEandS1Ws thanks a lot !!!
thanks to Joe Picasso for the great tutorial on inserting 3 D graphics into Virtual Pinball !!!!
.... my first attempts with 3 D graphics in the table The Fly 🙂
thank everyone who created the basis for the table. It is based on Freefall from 1981 / JPSalas / StrangeLeo72, and more
thanks to the genius artists. Reskin for THE FLY
.... NOT FOR SALE
FOR PERSONAL USE ONLY AND NOT FOR COMMERCIAL SALE OR DISTRIBUTION. PLEASE DO NOT DISTRIBUTE FINAL.
With this reskin have fun .... enjoy the table
Backglass, wheel, media in the folder
Rome: freefall ............. 1981
571 downloads
-
Flip A Card (Gottlieb 1970)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
palyfield color adjustment
adjust color and transparency of plastics
new plastics for the upper guides
playfield lights and lighting
flipper adjustment
new metal side guides
color correction and bumper inscription
screw adjustment
inclusion of transparent upper left plastic with support pin
new backdrop with image of Wildman's new B2S
I want to say a big thank you to Wildman for allowing his new B2S to be used for this table! follow link of your new work
Description of Loserman76:
Gottlieb's Flip A Card (1970)
Table primary build/scripted by Loserman!
Thanks to the following for their contributions (whether they know it or not!)
If I have missed anyone, let me know as this table would not exist without the
folks in the community.
Hauntfreaks - new images for table and plastics
Grizz - image cuts/pastes from some of his images used on my redraw
JPSalas - gameroom backdrop and methods gleaned from his fantastic tables
EalaDubhSidhe - table object templates
Black - HS save/load routines
Itchigo - table templates which gave me ideas on how to accomplish what I wanted in this table
CONRAM - various code ideas learned by tracing through code on his tables
akiles50000 - for that totally awesome tutorial on table building. So much stuff I now understand because of the work put into this tutorial
Inkochnito - scorecards/instruction cards
Pinuck - Gottlieb chimes and score motor routines
Herweh - directB2S designer and tools
JimmyFingers - rolling ball and other objects' sound routines
GNance - update to spinner code to replicate slowing down
The options menu is now available by holding down the left flipper key for about 2 seconds when a game is not in progress. Once opened, left flipper moves between the different menu items and the right flipper goes through that item's available choices.
For this table, I am using my new method for enabling/disabling the dB2S backglass. By default the backglass is disabled. The easy way to enable it is this method:
1.Launch table and then exit. It will auto-create a file in the USER folder of VPinball named "LMEMTables.txt"
2.Open this file in notepad and change the "0" to a "1" and save.
3.Next time you launch, the backglass will launch.
Or for the die hards out there, create a text file in the USER folder named LMEMTables.txt and put a "1" (no quotes) on the first line and save it.
297 downloads
-
Far Out (Gottlieb 1974)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
version used, follow the link to the original table
Adjustments made:
color correction of the upper part of the playfield
plastics color corretion
metals
upper guide plastics
flippers adjustment
playfield lights and lighting
new POV
bumper cap adjustment
star light fix
Description of Loserman76:
VPX conversion
Artwork done by GNance
Original Art by Popotte
others to thank: JPSalas, Pinuck, hauntfreaks, Borgdog, Arngrim
in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" as another coin input and "4" for coin and auto-start game (like I recall the dime slots generally were) to simulate 3 coin slots
when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option.
I've also included shadows for the ball and flippers. If you want to turn them off look for these lines at the beginning of the script:
Const ShadowFlippersOn = true
Const ShadowBallOn = true
change to false if you want either of the shadows not showing on your tables
305 downloads
-
Firecracker (Bally 1971)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically...
small improvements in the playfield, plastics, lighting,flippers position... I want to make it clear that the descriptions for the tables I'm sharing are "standard" for all, changes are made when there is a need for some adjustment.
- new apron / top apron (IPDB)
- subtle touches to the playfield
- lighting
- new upper guide plastics
- new side ramp metals
- adjustment of the position of the targets
- added lighting on the button between the "save ball" flippers
- color of the inner side woods (IPDB)
- retouching of plastics and transparent edge
version used, follow the link to the original table https://vpuniverse.c...ker-bally-1971/
Excellent work by Hauntfreaks with this B2S that goes very well with this table! Thanks Haunt.
Description of Loserman76:
Bally's Firecracker (1971)
Table primary build/scripted by Loserman!
Playfield/Plastics by hauntfreaks
Thanks to the following for their contributions (whether they know it or not!)
If I have missed anyone, let me know as this table would not exist without the
folks in the community.
Hauntfreaks - new images for table and plastics
Grizz - image cuts/pastes from some of his images used on my redraw
JPSalas - gameroom backdrop and methods gleaned from his fantastic tables
EalaDubhSidhe - table object templates
Black - HS save/load routines
Itchigo - table templates which gave me ideas on how to accomplish what I wanted in this table
CONRAM - various code ideas learned by tracing through code on his tables
akiles50000 - for that totally awesome tutorial on table building. So much stuff I now understand because of the work put into this tutorial
Inkochnito - scorecards/instruction cards
Pinuck - Gottlieb chimes and score motor routines
Herweh - directB2S designer and tools
JimmyFingers - rolling ball and other objects' sound routines
GNance - update to spinner code to replicate slowing down
For this table, I am using my new method for enabling/disabling the dB2S backglass. By default the backglass is disabled. The easy way to enable it is this method:
1.Launch table and then exit. It will auto-create a file in the USER folder of VPinball named "LMEMTables.txt"
2.Open this file in notepad and change the "0" to a "1" and save.
3.Next time you launch, the backglass will launch.
Or for the die hards out there, create a text file in the USER folder named LMEMTables.txt and put a "1" (no quotes) on the first line and save it.
Operator menu options are as follows:
"[" - open/close the operator menu
"6" - changes balls per game (3/5)
"7" - change replay settings - but for now I only have 1 set of replay settings so you can't change these.
On the full screen version, pay attention to the apron to tell whether it is set for 3 or 5 ball play.
605 downloads
-
Flying Chariots (Gottlieb 1963)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically, to my liking...
small improvements in the playfield, plastics, lighting,flippers position...
version used was 1.0, follow the link to the original table https://www.vpforums...&showfile=16108
Excellent work by Hauntfreaks with this B2S that goes very well with this table! Thanks Haunt.
Description of Loserman76:
Gottlieb's Flying Chariots (1963)
made possible by:
Halen for doing the redraws
Editoy for the score reel images
bord for his primitives that I use a lot of
$20 for the schematics so I know how this thing works
ZIP includes backglass and wheel image cut from flyer
This is for personal use only. DO NOT include this in any pre-packaged ZIP of tables for commercial/non-commercial products. You know who you are. Just enjoy what is provided for FREE instead of trying to earn a buck from our community's work.
Any mods, require permissions from ALL of the above folks listed as primary contributors for this table.
313 downloads
-
Fast Draw (Gottlieb 1975)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically, to my liking...
small improvements in the playfield, plastics, lighting,flippers position...
version used, follow the link to the original table https://vpuniverse.c...-gottlieb-1975/
Description of Loserman76:
Gottlieb's Fast Draw (1975)
Table build/scripted by Loserman!
Thanks to the following for their contributions (whether they know it or not!)
If I have missed anyone, let me know as this table would not exist without the
folks in the community.
Images used for this table were culled from IPDB, Pinside, and various other websites only
JPSalas - gameroom backdrop and methods gleaned from his fantastic tables
EalaDubhSidhe - table object templates
Black - HS save/load routines
Itchigo - table templates which gave me ideas on how to accomplish what I wanted in this table
CONRAM - various code ideas learned by tracing through code on his tables
akiles50000 - for that totally awesome tutorial on table building. So much stuff I now understand because of the work put into this tutorial
Inkochnito - scorecards/instruction cards
Pinuck - Gottlieb chimes and score motor routines
Herweh - directB2S designer and tools
JimmyFingers - rolling ball and other objects' sound routines
Bodydump - for his assistance on various tables that got me using primitives and his lights
UncleWilly - for his primitive templates
Of course, the team behind Visual Pinball - without them, there wouldn't be much choice for playing pinball on a PC
I also must include Black and his Future Pinball as I used tables on that platform to help in building my VP tables.
You can enable dB2S by downloading my backglass file and modifying the script line that reads "B2SOn=false" to "B2SOn=True" (without the quotes of course)
To adjust Balls Per Game and Replay settings, hit '[' then '6' toggles 3 or 5 balls, and 7 moves through the replay settings (pay attention to the insert cards). When you have set them the way you like, hit '[' to exit settings.
NOTE: This table (like all of my recent releases) requires VP9.9x as it contains primitives
403 downloads
-
Full (Recreativos Franco 1977)_Teisen_MOD
By teisen
First I would like to thank Loserman76 for the beautiful work... wherever he is playing pinball!
small changes were made only aesthetically, to my liking...
small improvements in the playfield, plastics, lighting,flippers position...
version used was 1.0, follow the link to the original table https://vpuniverse.c...os-franco-1977/
This release wouldn't be possible without the following:
Popotte who provided the excellent redraws and permission for me to use his work from his FP release
Thalamus who provided the primitive I needed to finally be able to release this table (I've been sitting on it for a year in my "convert to VPX backlog")
Editoy who created an excellent directB2S which I am including in the ZIP for your useage
Like all of my releases, hold down the left flipper for 3 seconds when not playing a game to set the options.
ZIP includes a wheel image and the directB2S
This is for personal use only. DO NOT include this in any pre-packaged ZIP of tables for commercial/non-commercial products. You know who you are. Just enjoy what is provided for FREE instead of trying to earn a buck from our community's work.
154 downloads
(0 reviews)0 comments
Submitted
-
Full Throttle (RyGuy417 2023)
By ryguy417
Full Throttle was released by Heighway Pinball back in 2015. Well regarded by those who own it, I decided to create a tribute in my usual style. Many thanks to JP for permission to mod Inder 250. Hope you enjoy!
Key Features
Added soundtrack with music by Redline (same as the original table). Drop the included MP3s directly into your music folder Full graphic makeover on playfield, plastics, and backglass Animated backglass Left magna + right magna to change LUT Right magna to change tracks I would heavily suggest muting the rom by pressing F1--the rom-based sounds and music are...interesting.778 downloads
1.thumb.jpg.c8fafe89b29c487b06ad753be0b95086.jpg)
1.thumb.jpg.035712ccfdacc3861449f56c361c3be9.jpg)
.thumb.png.e8d923569c7ad8c0d8293085399d615a.png)
Illuminated.thumb.png.75d715670170e48968830f6d23115f86.png)
.thumb.jpg.8fa92b4e85953bdcbf617891401968c3.jpg)
.thumb.jpg.086609927159e457c195c35b98bb5b4f.jpg)
DMDUnderlay.thumb.jpg.7b2364ff2f3fe4eedcad3598c7470401.jpg)
DMDUnderlay.thumb.jpg.f5a26254c2f378b76a3247bc47a81d38.jpg)
.thumb.png.7192dbd1266b5b9e342216e13605fe10.png)
.thumb.png.711eca7991461037302c007426d01075.png)
Announcements
-
Top Downloads
-
-
.thumb.png.10ea3bf7ced2c334e204846095052fe0.png)
