-
SYSTEM SEARCH
System Scanners Online:
Username: Guest
>> System Scan?
>> The Universe >
Incoming Message:
Due to system limitations searching with words of 3 or less characters will not return results. For instance; Doctor Who. This will not return results as the system is trying to search for both Doctor AND Who in which Who will not be found as it's a 3 character word. To find Doctor Who; you'd search for either Doctor or "Doctor Who".
Search Tips:
For specific searches; enclose your search with quotes. Example: "Doctor Who" or "Addams Family".
Search the Community
Showing results for tags 'visual pinball 10'.
-
Version 3.0.1
4988 downloads
Gottlieb's 1984 Alien Star! Journey to an Alien Star for a pinball battle in space! Multiball, skill shots, and plenty of fast action! So much fun to play! Thanks to Borgdog for providing original playfield and plastic scans, cabinet stencils, and physical measurements of his actual table. He also had lots of authentic Gottlieb primitives to use, and did a tremendous amount of testing! Thanks also to @redbone who took those scans of the playfield and plastics and did a tremendous amount of work to get them to look so good! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass. DarthVito did the VR wall environment. In Version 3.0.0 (May 2025), I started the table over completely from scratch, as the prior version had incorrect table dimensions, wrong VR cab size, and lots of other things that needed updating. I updated to the latest VPW (2025) standards, physics, alllamps and 3D inserts, backglass for desktop, roth standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. I baked the GI, AND the metal walls, interior wood walls, spinner, plastic posts, and the reflections on them. Redbone further updated the playfield, the plastics, apron, and other images. Thanks to Borgdog for original playfield scans, image assets, and cab stencils. Dozens and dozens of hours were spent studying gameplay videos, many of which were done by Borgdog, to match the table skill shots and action. This table is loaded with options in the F12; including various balls, room brightness, flippers, tents, screw caps, plastic edge colors, LUTs, Dip settings, side wall colors, special Mother of Pearl solid inserts, and plenty of other VR stuff, including LED undercab lighting. The ROM can be found at pinballnirvana.com... alienstr.zip). Please NOTE there are several items to consider on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Gottlieb for 3 balls. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. However... I am not able to hard code the ROM menu options. Typically, there are levels of score achievements that award a free play. The default ROM has that set to off. I've included an nvram file you can use that sets that to match the instruction/score cards and Gottlieb's recommendation (600,000 and 1,400,000). Also, there are settings in the menu to set replays, sound, and HSTD. All this has been done for you in the included nvram file. I also have instructions in the script on how to change that if you wish to do yourself. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and only allows for points on 3 balls. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. These are the default DIPS that are and set at original table launch: 1=Coin Chute same 0=3rd coin chute no effect 0=Game mode of replay for hitting threshold 1=Number of balls = 3 0=Unlimited number of replays can be earned per game 1=Playfield Special of extra ball (Tourney mode this is zero) 0=Novelty of normal game mode (Tourney mode this set to 1) 1=Match feature 1=Background Sound Thanks again to Borgdog and Redbone for the playfield and plastic images, the stencils, the testing, and all the feedback! Also thanks to Hauntfreaks for the updated Backglass images. Also thanks to everyone else from the VPW team that provided testing and feedback! Required Software (64-bit versions): VPX 10.8.0 final release or later: https://github.com/vpinball/vpinball/releases VPinMame v3.6.0-1227 or later: https://github.com/vpinball/pinmame/releases B2S Server 2.1.3 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases -
Version 2.0.0
4081 downloads
Bally's Safe Cracker combines pinball and board games! The goal is to advance to the board game for a chance to break into the safe while avoiding obstacles along the way. Players spin and stop the safe dial to determine how many spaces to advance. The player can collect winnings and resume playing pinball after each dial spin, or spin again and risk losing it all. Players must risk it all for a chance to break into the bank vault and win the token award. The original 1.0 version was done by fuzzel, flupper1, rothbauerw; with the VR room originally being done by b4ast1. Apophis requested that I update the table with an updated playfield scan from EBisLit, and include all the new VPW code, 3D inserts, hybrid mode, physics, drop, standup, and vari-targets, bumpers, flashers, playfield mesh, fleep sounds, etc. Redbone further cleaned the playfield up, as well as some other images. I was able to bake the GI lights using blender light maps to make it look as real as possible (thanks for teaching me, apophis!), as well as implementing a pwm approach to the fading. I've also included other VR rooms, a topper, a flasher/siren, and F12 options. I reused the ramps and other prims from fuzzel's table, as well several pieces of code from rothbauerw. Other options in the script include a constant called, "useownb2s". If you set this to 1, you will turn off the desktop built in backglass. This is for desktop users that want to use a b2s backglass, not the built in one. MAGIC TOKENs... if you win the board game, the table will issue you a magic token (you'll see the coin roll down). How the ROM works... is the next game played will force you to use the magic token/s that you've won, and you play a 4 ball multiball for 90 seconds. Awesome! But you need to earn the tokens... REQUIREMENTS: ROMs: You will need two ROMs: A percentaging version is for the number of tokens issued is limited based on the game's earnings, and in a home environment you want to be able to obtain tokens. They are located here: https://vpuniverse.com/files/file/5161-safe-cracker-18-no-percentaging-s11/ https://vpuniverse.com/files/file/5162-safe-cracker-18-s11/ VPX: version 10.8.0 RC3 or higher: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1947-3b3f101 VPM: version 3.6.0 or higher: https://github.com/vpinball/pinmame/actions/runs/8893510521 B2S: version 2.1.1 or higher (if using b2s) https://github.com/vpinball/b2s-backglass/releases Two versions of the b2s are available... one for 2 screens from wildman, and one that is 3 screens by ryguy417. https://vpuniverse.com/files/file/6999-safe-cracker-bally-1996/ https://vpuniverse.com/files/file/13623-safe-cracker-bally-1996-b2s-with-full-dmd/ Thanks to apophis, rothbauerw, ebislit, fuzzle, flupper1, redbone, and many others from the VPW team for testing and feedback. -
Version 2.0.0
2259 downloads
Bad Move Human! Centaur (Bally 1981) has quickly become my favorite pinball machine after doing this development. Its fun, challenging, and the multiballs are awesome! Thanks to Bord, @redbone, and Hauntfreaks for graphics assistance. Bord provided a real scanned playfield, and Redbone updated it for scaling, inserts, and other touchups. Redbone also created images for the plastics, apron, bumpers, and targets. The VR backglass images are from Hauntfreaks. Version 2.0 is a complete build from scratch utilizing full VPW standards, physics, baked GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth drop and standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. I've implemented a full two trough system in this table to recreate what the actual table has and does for the orbs multiballs. A lot of work and timing went into getting that just right. Many primitives were redone in blender to get as accurate as I could. Some were reused and/or updated from Bord's prior table. And as usual, there are plenty of options in the F12 menu, including ball choices, flipper colors, targets, screw caps, pulsing Queen's Chamber, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu, including LED undercab lighting, toppers, and more. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). I've also implemented some mods to replicate the recent Haggis Pinball Centaur Orblivion mod/update. Graphics, VR updates, targets, etc. will be automatically updated with the Haggis mod in the F12 menu. You can also get all the mods individually by selecting them one at a time. Please NOTE there are several items to consider on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play, AND a one free tilt with a warning. If you want to change the ROM settings yourself, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. However... I am not able to hard code the ROM menu options. Typically, there are levels of score achievements that award a free play. The default ROM has that set to off. I've included an nvram file you can use that sets that to match the instruction/score cards and Bally's recommendation (1,200,000 and 2,800,000). Also, there are settings in the menu to set replays, sound, and HSTD. All this has been done for you in the included nvram file. I also have instructions in the script on how to change that if you wish to do yourself. Thanks again to Redbone for providing all the graphics updates, and to Hauntfreaks for the updated backglass images, and Bord for the playfield! Required Software (64-bit versions): VPX 10.8.0 final release or later: https://github.com/vpinball/vpinball/releases VPinMame v3.6.0-1227 or later: https://github.com/vpinball/pinmame/releases B2S Server 2.1.3 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases -
Version 2.0.1
1737 downloads
Gottlieb's Super Orbit! Lots of fun to play, with a varitarget, orbits, and lots of bonus opportunities. Redbone spent considerable time to get the playfield and plastic images just right, as resources for this table were very limited. As usual lots of hours were put in on this one, and lots of tweaking on the varitarget and physics to emulate a real machine. I implemented the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, roth standup and varitarget targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Redbone provided the playfield and updated the plastics and apron, and other images. Hauntfreaks provided the higher resolution VR backglass and Silversurfer updated the cab artwork. I also added options for balls, ball brightness, LUTs, Dip settings, siderails, and plenty of other VR stuff. DarthVito provided a few additional wallpaper VR Room walls. You can find the ROM at pinballnirvana.com... sorbit.zip. Also, I've included the nvram file to initially set the Dips, as the ROM creates settings that should be adjusted. You can either grab the nvram file and put it in your nvram directory, or follow this process to do an initial setup for yourself. (When you open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options, and I recommend these shown below. Once entered, you can exit out, and in the script, you can set the SetDIPSwitches to zero. That will set the ROM settings and turn off the option. If you later want to change that, you can turn it back on and change the dips.) - 3 ball - Playfield special of "extra ball" - Game mode of "replay" - Novelty of "normal" - Check the Match, Credits Thanks again to Redbone for the playfield and plastic images, Rothbauerw for the varitarget code, Hauntfreaks for the updated VR Backglass, DarthVito for additional VR walls, and Silversurfer for the cab art images! Also thanks to everyone else from the VPW team that provided feedback!- 26 comments
- 9 reviews
-
- 170
-
-
Version 4.0.4
9744 downloads
Let the Sorcerer work a little magic for you! I've done a few versions of this table in the past, as well as other authors. The past versions I did built on older versions. Apophis reached out to me that the physics weren't quite right on the other tables, as he plays one a lot in the arcade. So, I completely overhauled the table to version 4.0 and essentially started from scratch, reusing only a few primitives. Redbone worked a new playfield, plastics, and other graphics for me. I did a full implementation of current VPW standards, physics, targets, 3D inserts, playfield mesh, VR, hybrid, baked GI lighting, shadows, etc. There's an F12 menu with some options in there. Also thanks also to Primetime5k, who helped me get staged flippers implemented and tested. Note: a new alternate gsound was recently released, however if you choose to use that, the ROM volume option needs to be at 0... which is default. However is you don't use gsound, I recommend turning that ROM volume down to -12 or something... as it can get a bit annoying if too loud. Also, you can turn off the background sound. Instructions for that and others are at the bottom of the script, however, here's the instructions as well: ROM Instructions and example to turn off background sound Start table as usual Press (8) to get into ROM menu Press (7) to start correct advancement Press (8) several times until 04 is shown in the Credit Display. 'Auto-Up / Manual-Down switch is controlled by (7) Press (8) repeatedly until you get to the adjustment number desired. For example, background sound is defaulted to on. It is adjustment number 35. You'll see a 1 in the upper left display. Press (1) to change that value. To turn off sound, set the value to 0. Note: Press (7) to reverse the advancement up or down. (9) will exit/reset Note: Auto-Up / Manual-Down (7) also controls the direction the menus will advance Enjoy, and hopefully you also feel that the physics and table play much harder, and closer to the actual table. Thanks again to Redbone, apophis, and Primetime5k, as well as the VPW team for testing. Required Software (64-bit versions): VPX 10.8.0 RC4 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1975-051104c B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1122: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1122-79a301d -
[New VP10 Alert] Centaur (Bally 1981)
UnclePaulie posted a topic in New Visual Pinball 10 - Releases
View File Centaur (Bally 1981) Bad Move Human! Centaur (Bally 1981) has quickly become my favorite pinball machine after doing this development. Its fun, challenging, and the multiballs are awesome! Thanks to Bord, Redbone, and Hauntfreaks for graphics assistance. Bord provided a real scanned playfield, and Redbone updated it for scaling, inserts, and other touchups. Redbone also created images for the plastics, apron, bumpers, and targets. The VR backglass images are from Hauntfreaks. Version 2.0 is a complete build from scratch utilizing full VPW standards, physics, baked GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth drop and standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. I've implemented a full two trough system in this table to recreate what the actual table has and does for the orbs multiballs. A lot of work and timing went into getting that just right. Many primitives were redone in blender to get as accurate as I could. Some were reused and/or updated from Bord's prior table. And as usual, there are plenty of options in the F12 menu, including ball choices, flipper colors, targets, screw caps, pulsing Queen's Chamber, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu, including LED undercab lighting, toppers, and more. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). I've also implemented some mods to replicate the recent Haggis Pinball Centaur Orblivion mod/update. Graphics, VR updates, targets, etc. will be automatically updated with the Haggis mod in the F12 menu. You can also get all the mods individually by selecting them one at a time. Please NOTE there are several items to consider on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play, AND a one free tilt with a warning. If you want to change the ROM settings yourself, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. However... I am not able to hard code the ROM menu options. Typically, there are levels of score achievements that award a free play. The default ROM has that set to off. I've included an nvram file you can use that sets that to match the instruction/score cards and Bally's recommendation (1,200,000 and 2,800,000). Also, there are settings in the menu to set replays, sound, and HSTD. All this has been done for you in the included nvram file. I also have instructions in the script on how to change that if you wish to do yourself. Thanks again to Redbone for providing all the graphics updates, and to Hauntfreaks for the updated backglass images, and Bord for the playfield! Required Software (64-bit versions): VPX 10.8.0 final release or later: https://github.com/vpinball/vpinball/releases VPinMame v3.6.0-1227 or later: https://github.com/vpinball/pinmame/releases B2S Server 2.1.3 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases Submitter UnclePaulie Submitted 04/08/25 Category VPX - Pinball Tables VPX Standalone Yes -
View File Class of 1812 (Gottlieb 1991) w VR Room Early in 2021, I received permission from Bigus to update this table and add the VR conversions... originally done by Tom Tower and Ninuzzu. The VR conversion included backglass, flashers, lighting, GI, and other table issue fixes (high score initials, trough multiball and tilt issue, and others). I used the Blacksad dark image from his backglass, as it looks amazing. All the interactivity was done in the script. Sixtoe did a lot of lighting updates as well, including bloom lighting, overlay, etc. Version 2.0 includes a hybrid mode for desktop, cab, and VR. Plus all the latest updates that the VPW team has been doing lately. It includes Fleep sounds, nFozzy / Roth physics and flippers, and general table physics updates. It also has Rothbauerw drop targets, VPW Dynamics Shadows by Iakki, Apophis, and Wylte, Flupper Domes, and LUT options. Bord also added a playfield mesh so the ball goes into the center saucer more realistically. I also added a recent update by fluffhead35 for ballrolling and ramproll amplication sounds. Hauntfreaks provided a couple lighter ball images as well. I also added more VR options to include a wall clock, and additional animation. There are plenty of options in the script including LUT lighting changes, ball brightness, VR, cab, and desktop modes, dynamic shadows, rolling amplification, and other sound and shadow options. Also for VR users, you can change to different room environments. If you get 3 credits each time you add a coin, I put instructions in the script on how to modify your ROM to only add one coin. Anyway, I hope you enjoy! And thanks again to all involved! Submitter UnclePaulie Submitted 12/05/21 Category VPX - Pinball Tables
-
View File Supersonic (Bally 1979) Supersonic (Bally 1979) is a fun, challenging, widely successful table that Bally produced 10,340 machines. A popular theme with some challenging shots, and lots of bonus opportunities. Be careful, as it is very drain and outlane hungry. @redbone utilized playfield images off the web to come up with a properly sized playfield that looks amazing. I then built the table from scratch, using a prior table I did, Voltan, as a basis. I've done my best to get all the physics and shots to match videos off the web. I also redid the spinner logic to match the majority of tables I could find. It plays very close to the real table. As usual, all the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, playfield mesh, shadows, updated backglass for desktop, roth targets, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. In addition to the playfield, Redbone also updated the plastics, apron, and spinner images. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. Thanks to hauntfreaks for also providing the backglass images. There are plenty of options in the F12 menu, including ball choices, flipper colors, spinners, targets, screw caps, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE there are several items to consider on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. However... I am not able to hard code the ROM menu options. Typically, there are levels of score achievements that award a free play. The default ROM has that set to off. I've included an nvram file you can use that sets that to match the instruction/score cards and Bally's recommendation (120,000 and 260,000). If you don't care... don't use the nvram file. I also have instructions in the script on how to change that. Another ROM NOTE: The ROM I've chosen to use is the updated 7 digit score display. (The original had 6 digits... but as people got better, they could "flip" the score, and not know how high they got). Anyway, you NEED the 7 digit ROM, sstb.zip, to play... and depending on where you download the ROM from, some will require you to also have sst.zip as well. So, players will need both sst.zip and sstb.zip if they are sourcing from VPU. Other downloads may not. Thanks again to Redbone for providing the graphics updates, and to Hauntfreaks for the updated backglass images! Required Software (64-bit versions): VPX 10.8.0 final release or later: https://github.com/vpinball/vpinball/releases VPinMame v3.6.0-1227 or later: https://github.com/vpinball/pinmame/releases B2S Server 2.1.3 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases Submitter UnclePaulie Submitted 02/22/25 Category VPX - Pinball Tables VPX Standalone Yes
-
Version 2.0.1
2328 downloads
Everyone goes to his final reward eventually. And few ever escape. Either way, their money ALWAYS remains behind in Catacomb - the thrilling pin game from Stern. Having a player controlled action-packed backglass, combined with a super fast playfield, Catacomb demands the ultimate in refined skills and cunning strategy. What numbers should be picked? What colors must be chosen? Only seconds to decide... as a simulated voice alerts the player to his options. Thanks to Hauntfreaks for providing me with a freshly scanned playfield, and thanks to Redbone for helping with various upscales and graphics cleanup, and lots of other graphic updates. The whole table was done utilizing latest VPW standards for physics, lighting, GI baking, 3D inserts, playfield mesh, shadows, drop targets, 3D inserts, etc. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and physics action. I've included default settings for the ROM options, as well as being able to change the ROM sounds in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Also, if you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Ball options are also available in the script. All other options (including VR rooms) are in the F12 menu. I reused the code from the prior HSM/lander table, as it was required to work with the B2S functionality. However it's been updated, AND if you are a VR user, I've created the backglass to be fully 3D and functional. Thanks also to the VPW team for testing and feedback! _________ Required Software (64-bit versions): VPX 10.8.0 RC4 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1975-051104c VPinMame 3.6.0-998 or later: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-998-a77c2d2 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 -
Version 2.0.0
1336 downloads
Supersonic (Bally 1979) is a fun, challenging, widely successful table that Bally produced 10,340 machines. A popular theme with some challenging shots, and lots of bonus opportunities. Be careful, as it is very drain and outlane hungry. @redbone utilized playfield images off the web to come up with a properly sized playfield that looks amazing. I then built the table from scratch, using a prior table I did, Voltan, as a basis. I've done my best to get all the physics and shots to match videos off the web. I also redid the spinner logic to match the majority of tables I could find. It plays very close to the real table. As usual, all the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, playfield mesh, shadows, updated backglass for desktop, roth targets, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. In addition to the playfield, Redbone also updated the plastics, apron, and spinner images. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. Thanks to hauntfreaks for also providing the backglass images. There are plenty of options in the F12 menu, including ball choices, flipper colors, spinners, targets, screw caps, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE there are several items to consider on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. However... I am not able to hard code the ROM menu options. Typically, there are levels of score achievements that award a free play. The default ROM has that set to off. I've included an nvram file you can use that sets that to match the instruction/score cards and Bally's recommendation (120,000 and 260,000). If you don't care... don't use the nvram file. I also have instructions in the script on how to change that. Another ROM NOTE: The ROM I've chosen to use is the updated 7 digit score display. (The original had 6 digits... but as people got better, they could "flip" the score, and not know how high they got). Anyway, you NEED the 7 digit ROM, sstb.zip, to play... and depending on where you download the ROM from, some will require you to also have sst.zip as well. So, players will need both sst.zip and sstb.zip if they are sourcing from VPU. Other downloads may not. Thanks again to Redbone for providing the graphics updates, and to Hauntfreaks for the updated backglass images! Required Software (64-bit versions): VPX 10.8.0 final release or later: https://github.com/vpinball/vpinball/releases VPinMame v3.6.0-1227 or later: https://github.com/vpinball/pinmame/releases B2S Server 2.1.3 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases -
Version 2.1.0
5780 downloads
So you wanna mouse around! This table was originally done by Herwey, and he gave me the permission to add all the latest physics, sounds, etc. to this fun table. Thank you very much, Herwey! On his version 1.1 he had help from several others including Schreibi, OldSkoolGamer, ICPjuggla, Cosmic80, Flupper, JPSalas, 32assassin, Sliderpoint, Ninuzzu, Dark, DJRobX, TTTTTWii, Bork and Thalamus. I did quite a few updates in version 2.0 mentioned below (and detailed in the vpx script), essentially getting up to the latest VPW physics and sounds, and other corrections. Also thanks to Rothbauerw, PinStratsDan, Bord, Tomate, Sixtoe, Thalamus, and Benji for improvements, testing, and feedback on the 2.0 version! If you are playing in VR... you MUST select VR_Room = 1 in the script!! There are several options to select in the script, including ball brightness, color mods, GI and Flasher options, VR Room, VR clock, VR posters, VR topper. Color mods and flippers can be changed by clicking the right and left magna save buttons. (You can turn that off in the script as well) IF YOU experience performance issues... there are options to change that. First of all, you can uncheck "Reflect Elements on Playfield in the table options window. Also, you can turn dynamic shadows off for additional performance if needed. Version 2.0 Updates include: - Implemented the table to a hybrid (desktop, cab, and VR), and has options for ball brightness. - Added VR to include an animated backglass (image from Wildman), and several VR options (room, poster, clock, topper). - The table and flipper physics have been updated to the latest VPW standards, as well as dynamic shadows, drop targets, ramprolling sounds, and several other tweaks. - Fleep sounds added, as well as relay sounds. - Added Flupper dome and Flupper bumpers. - Adjusted the flippers to be actual size, and tweaked the flipper physics. - Corrected a couple errors in the table, as the million lights didn't light up correctly, and a few other things. - Adjusted the lighting levels some. - Rothbauerw corrected some code to control the motorbank correctly, as there were cases it wouldn't move or impact nvram. He also helped correct some other trap code issues. - Tomate added new plastic ramps and textures. - Enhanced performance as much as I could by removing all getballs calls and no longer destroy and recreate balls. I implemented only the gBOT global call. - Updated the trough code to manage all balls on the table. - Updated some images to implement see through holes in the apron and back wall. - And several other updates, all documented in the script. Once again thank you to Herwey, Rothbauerw, PinStratsDan, Bord, Tomate, Sixtoe, Thalamus, and Benji for improvements, testing, and feedback!! -
Version 2.0.0
1791 downloads
Gottlieb's Race Thru Space! Another extended wide-body machine like Circus. Lots of fun to play, two Varitargets, a hard to hit bonus saucer, and fast loops. Redbone had been working on getting the playfield to a much better state, and reached out to me to see if I'd like to create the table from it. It was very similar to physics, style, etc. from the Circus table that I just worked on, so I got to work. Lots of hours were put in on this one, and lots of tweaking on the Varitargets to emulate a real machine. As usual, I updated to latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth drop and standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, varitargets, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Redbone provided the playfield and updated the plastics and apron, also provided some ambient sounds. Hauntfreaks provided the higher resolution VR backglass and cab artwork. I also added options for balls, ball brightness, LUTs, Dip settings, ambient sounds, siderails, and plenty of other VR stuff. Hauntfreaks even provided a fun space themed wallpaper VR Room walls. I've included an option for two ROMS (you can find them at pinballnirvana.com... starrac7 and starrace). The original 6 digit ROM, and a 7 digit ROM (so when you score over a million you can see it). There's an option in the script to change that, however I've defaulted to the 7 digit. Make sure to grab the correct backglass if you are in a cab environment. Hauntfreaks just released the corresponding backglasses. I've included the nvram files to initially set the Dips, as the ROM creates settings that should be adjusted. You can either grab those nvram files and put them in your nvram directory, or follow this process to do an initial setup for yourself. (When you open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options, and I recommend these shown below. Once entered, you can exit out, and in the script, you can set the SetDIPSwitches to zero. That will set the ROM settings and turn off the option. If you later want to change that, you can turn it back on and change the dips.) - 3 ball, Playfield special of "extra ball" - Game mode of "replay" - Novelty of "normal" - Tilt of "ball in play" - Check the Match, Credits, Sound when scoring - AND most importantly, "Scoring Sounds Only". Again note... the background sounds from this era can get kind of annoying... especially if you have a good bass speaker in your cab. Make sure to follow the above procedure for turning the sounds option to "Scoring Sounds Only". Thanks again to Redbone for the playfield and plastic images, the space sound, and Hauntfreaks for the updated Backglass, and cab art images! Also thanks to Rothbauerw for his linear target code, bietekwiet, passion4pins, and everyone else from the VPW team that provided feedback! -
Version 2.0.0
1029 downloads
New Wave was a conversion kit done by Bell Games in 1985; utilizing a full reuse of Black Pyramid. Since I just finished Black Pyramid, it was very straightforward to use that as a baseline for the New Wave conversion kit. @redbone spent a lot of time getting the playfield, plastics, bumpers, targets, and other images just right. He was able to utilize some prior work that @cyberpez did as well. I've included TONS of options in there, as it was a kit, and it appears that lots of different items could be installed. Also Cyberpez requested I add some options he was working on years ago. So, there are alternate plastics, bumpers, flippers, targets, rollovers, rollover lights, led edge lighting, and lots of ball choices... including a few glowballs. All changeable in the F12 menu. I was also able to reuse some work that was done on the cabinet for VR and the backglass. I think Devious626 did lots of that work in the past. And hauntfreaks did some effort in the past on the backglass. Those images have been incorporated as well. I implemented the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth drop and standup targets, a swinging target, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target images, and bumpers. Lots of hours were spent studying gameplay videos to match the table skill shots and physics action. There are options included in this table via the F12 menu including colors for balls, flippers, screws, LED plastics, rollovers and lights, bumpers, plastics, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Also NOTE: Just like Black Pyramid, Bally recommends to ensure that the self-test position settings for the ROM menu items for 16,17,18,19 are set to "03". Here is the procedure to do this. I've included the nvram in the zip file as well, so if you want to bypass that step and use it instead. Here is the procedure to set the self-test positions on this Bally 35 MPU table: 1. Press 7 to enter test mode. Continue to repeatedly press 7 until you see 01 appear in the ball in play/match display 2. Press and HOLD the 1 key until it reaches the value you want to set it to (start with 16). The value will increase by 1 while you are holding in the 1 key. If you happen to go past the value you want to set it to, while holding in the 1 key press and release the 7 key. The value will then decrement by 1 while you are holding in the 1 key. When you reach the value you want, release the 1 key. Set the value to 03. 3. Repeat pressing 7 to scroll the remainder of the settings (17,18,19) and change values to 03 in the similar manner. 4. Press F3 to save your changes and reset the table. Required Software (64-bit versions): VPX 10.8.0 RC7 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2046-043fac7 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1194-0474eb3 -
Version 2.0.0
1498 downloads
Enjoy a Test of Champions on the Playfield of Combat in Bally Midway's exciting Four-Player Pinball Kings of Steel! Thanks to Redbone for cleaning up the playfield from the original scan from TAB, as well as target, bumper, and backwall images. Also thanks to apophis and the VPW team for feedback and testing. Hauntfreaks provided the higher resolution VR backglass. DarthVito did the VR wall environment. HIGHLY RECOMMENDED TO CHANGE 4 SELFTEST POSTIONS IN THE ROM FOR SPECIAL REPLAY/X-BALL/NOVELTY MODES!!!! Here is the procedure to set the selftest postions on this Bally 35 MPU table: 1. Press 7 to enter test mode. Continue to repeatedly press 7 until you see 01 appear in the ball in play/match display 2. Press and HOLD the 1 key until it reaches the value you want to set it to. The value will increase by 1 while you are holding in the 1 key. If you happen to go past the value you want to set it to, while holding in the 1 key press and release the 7 key. The value will then decrement by 1 while you are holding in the 1 key. When you reach the value you want, release the 1 key. 3. Repeat pressing 7 to scroll the remainder of the settings and change values in the similar manner. 4. Press F3 to save your changes and reset the table. Here are the recommended values to change to: 16: 02 - Special is extra ball (01 is 50,000, 03 is replay) 17: 02 - Special is extra ball (01 is 50,000, 03 is replay) 18: 03 19: 03 - High Score to date earns 3 credits (00 is 0; 01 is 1; 02 is 2) I updated to latest VPW standards, physics, GI VLM, and shadow baking, 3D inserts, Alllamps insert routines, shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth drop and standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and action. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. Required Software (64-bit versions) VPX 10.8.0 RC3 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1947-3b3f101 VPinMame 3.6.0-929 or later: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-929-8c5f83e B2S Server 2.1.1 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.1 -
Version 2.0.0
1618 downloads
Voltan Escapes Cosmic Doom (Bally 1979) is a fun, fast table that Bally only produced 365 machines. A weird, fun theme with some challenging shots, and a very hungry drain and outlane play. Hauntfreaks reached out to me some time ago about updating Voltan. It ended up being behind in my queue of other tables I was doing, and I finally got to doing this table. What a cool, fun table! @redbone utilized playfield images off the web to come up with a properly sized playfield that looks amazing after all the updates he did! I then built the table from scratch, using a few primitives that Bord had from some work he did years ago on this. I've done my best to get all the physics and shots to match videos off the web. As usual, all the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth standup targets, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target, and spinner images. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. Thanks to hauntfreaks for also providing the backglass images, as well as some initial VR cabinet images. Also... redbone was toying with SSF and noticed that sounds were right for SSF, so Apophis and I were able to successfully find that there's a small bug in the VPW script for audiopan and audiofade routines. Now for those of you with SSF, it should sound great! As usual, there are plenty of options in the F12 menu, and redbone also made an ambiance background sound file to play if you choose. Other options include colors for balls, flippers, screws, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM Dip Switch options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play. If you want to change the ROM Dip Switch settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Required Software (64-bit versions): VPX 10.8.0 Final or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2051-28dd6c3 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases The updated b2s file can be found here: https://vpuniverse.com/files/file/23841-voltan-escapes-cosmic-doom-bally-1979-b2s/ -
View File Voltan Escapes Cosmic Doom (Bally 1979) Voltan Escapes Cosmic Doom (Bally 1979) is a fun, fast table that Bally only produced 365 machines. A weird, fun theme with some challenging shots, and a very hungry drain and outlane play. Hauntfreaks reached out to me some time ago about updating Voltan. It ended up being behind in my queue of other tables I was doing, and I finally got to doing this table. What a cool, fun table! @redbone utilized playfield images off the web to come up with a properly sized playfield that looks amazing after all the updates he did! I then built the table from scratch, using a few primitives that Bord had from some work he did years ago on this. I've done my best to get all the physics and shots to match videos off the web. As usual, all the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth standup targets, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target, and spinner images. Lot of hours were spent studying gameplay videos to match the table skill shots and physics action. Thanks to hauntfreaks for also providing the backglass images, as well as some initial VR cabinet images. Also... redbone was toying with SSF and noticed that sounds were right for SSF, so Apophis and I were able to successfully find that there's a small bug in the VPW script for audiopan and audiofade routines. Now for those of you with SSF, it should sound great! As usual, there are plenty of options in the F12 menu, and redbone also made an ambiance background sound file to play if you choose. Other options include colors for balls, flippers, screws, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM Dip Switch options are hard coded into the script and are based on the recommended values from Bally for 3 balls and harder play. If you want to change the ROM Dip Switch settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Required Software (64-bit versions): VPX 10.8.0 Final or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2051-28dd6c3 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases The updated b2s file can be found here: https://vpuniverse.com/files/file/23841-voltan-escapes-cosmic-doom-bally-1979-b2s/ Submitter UnclePaulie Submitted 02/06/25 Category VPX - Pinball Tables
-
Version 2.0.1
2587 downloads
The legend known as Black Pyramid lives again through the far corners of Bally's 1984 pinball machine! This is a great play and challenging table. The main goal is to achieve 10,000,000 points to get a free game according to several reviews of game play. A good overview of the rules can be seen here: https://www.youtube.com/watch?v=YEZIFjQppR4 This was a definite challenge to create as there wasn't a good playfield available, however thanks to @redbone for spending countless hours creating a playfield from various images on the web. And thanks to Apophis for helping me with various Blender techniques to obtain a solid VLM GI bake, as well as physics testing. I was able to utilize various images, videos, and Redbone's playfield to get accurate placement of everything, and then implemented the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, Roth drop and standup targets, a swinging target, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target images, and bumpers. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and physics action. Significant time was also spent on implementing a center swinger target solution to be a combination of Roth standup targets and the swinger target approach done by Loserman on Space Oddesy. There are options included in this table via the F12 menu including colors for balls, flippers, screws, LED plastics, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Also NOTE: Bally recommends to ensure that the self-test position settings for the ROM menu items for 16,17,18,19 are set to "03". I recommend doing immediately when you first launch the game. Here is the procedure to set the self-test positions on this Bally 35 MPU table: Press 7 to enter test mode. Continue to repeatedly press 7 until you see 01 appear in the ball in play/match display Press and HOLD the 1 key until it reaches the value you want to set it to (start with 16). The value will increase by 1 while you are holding in the 1 key. If you happen to go past the value you want to set it to, while holding in the 1 key press and release the 7 key. The value will then decrement by 1 while you are holding in the 1 key. When you reach the value you want, release the 1 key. Set the value to 03. Repeat pressing 7 to scroll the remainder of the settings (17,18,19) and change values to 03 in the similar manner. Press F3 to save your changes and reset the table. Required Software (64-bit versions): VPX 10.8.0 RC7 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2046-043fac7 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1194-0474eb3 -
Version 2.0.7
3302 downloads
A version of Elektra VPX was originally done by 32assassin and artwork by Fancisco666. However in this release, images of the playfields and plastics were obtained off the web, and upscaled and cleaned up by redbone. Since the hole placements were different, there was lots of effort to move, resize, and edit most of all the elements. This is a really fun table to play... as it was the first pinball machine that had three different levels to it. Included in this Version 2.0 is Hybrid VR/desktop/cabinet modes, new upscaled playfields, VPW physics, flipper tricks, dynamic shadows, Fleep sounds, Lampz, 3D inserts, new baked general illumination lighting, sling corrections, drop and stand-up targets, saucers, playfield meshes, various primitives, etc. Significant time was spent on researching online videos, to ensure accuracy of shots, ball drops, kickouts, and overall playability. I also created a desktop backglass with a cool lighting effect, as well as the VR backglass and other VR options. There are also some performance improvements, and I added a playfield mesh for the playfield, so there's a realistic bevel in the saucers. I would like to thank redbone for the graphics help, and Tomate for working the 4 ramps into blender with collision and textures. He also baked them in as well. And thank you to iaakki for baking in all the GI lighting and shadows. It looks so relistic!! And I would additional like to thank the VPW team for testing and feedback, especially Apophis, PinStratsDan, Sixtoe, BountyBob, TastyWasps, leojreimroc, and Bord. There are several options in the script. Including VR, ball brightness, and LUT lighting options. The LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. The Dip Switch settings are done in the script and are hardcoded. IF... you want to change them, there's a setting in the script to manually override that, and then use F6 during gameplay to bring up the Dip Switch setting. This is a hybrid table done in VPX 10.74, and I have code in here to automatically choose between VR, desktop, and cabinet. Additional VR options in the script include two VR environments, a VR clock, a topper, posters, and settings for dynamic shadows if you experience a performance hit. Thanks again to Redbone, Tomate, iaakki, and the VPW team! There are two great b2s's out there... one by Wildman (https://vpuniverse.com/files/file/4963-elektra-bally-1981/), and one by Hauntfreaks if you would like the full dmd version (https://vpuniverse.com/files/file/12470-elektra-bally-1981-prototype-b2s-with-full-dmd/). I used Wildman's image in the VR backglass. -
Version 2.0.0
4738 downloads
This table was originally done by Herwey, and he gave me the permission to add all the latest physics, sounds, etc. to this fun table. Thank you very much, Herwey! On his version 1.1 he had help from several others including Schreibi, 32assassin, OldSkoolGamer, Cosmic80, Bord, Rosve, Batch, Vogliadicane, Flupper, Ninuzzu, Dark, DJRobX, and Thalamus. I did quite a few updates in version 2.0 mentioned below (and detailed in the vpx script), essentially getting up to the latest VPW physics, lights, and sounds, and other corrections. This was the first table I put the 3D inserts in (Thanks to apophis for his tutorial, feedback, and advice!). Also thank you to all the testers on the VPW team for testing, feedback, and suggestions for improvement: nFozzy, apophis, Aubrel, Wylte, Rik, Rajo Joey, iaaki, BountyBob, rothbauerw, tomate, PinStratsDan, and Lumi! Note: If you are playing in VR... you MUST select VR_Room = 1 in the script!! There are several options to select in the script, including ball brightness, color mods, GI and Flasher options, VR Room, VR clock, VR posters, VR topper. Sub mods and flippers can be changed by clicking the right and left magna save buttons. (You can turn that option off in the script as well) IF YOU experience performance issues... there are options to change that. First of all, you can uncheck "Reflect Elements on Playfield in the table options window. Also, you can turn dynamic shadows off for additional performance if needed. Version 2.0 Updates include: - Implemented the table to a hybrid (desktop, cab, and VR), and has options for ball brightness. - Added VR to include an animated backglass (image from Wildman), and several VR options (room, poster, clock, topper). (Thanks to Sixtoe's VR templates). Also animated all the flippers, plunger, etc. - The table and flipper physics have been updated to the latest VPW standards, as well as dynamic shadows, drop targets, standup targets, ramprolling sounds, and several other tweaks. - Fleep sounds added, as well as relay sounds. - Added Flupper domes. - Adjusted the flippers to be actual size, and tweaked the flipper physics. - Added 3D insert primitives and tuned the lighting significantly for those. Lots of work on the playfield cutouts, and associated text layer. - Changed lamp control to VPW Lampz. - Corrected some errors in the table, including spinner movement, rebounder action, some ramp lift code, timing on saucer entry, and a few other things. - Adjusted the lighting levels, and GI overhead. - Tomate added new Bally Flipper primitives, wall textures, and fixed an issue with the ramp lift primitive... as it wasn't built correctly in blender. - Enhanced performance as much as I could by removing all getballs calls and no longer destroy and recreate balls. I implemented only the gBOT global call. - Updated the trough code to manage all balls on the table. - Updated some images to implement see through holes in the apron and sub. - Created new background for desktop mode, with animated lighting. - Added updated center drain post dome from Bord's space shuttle (done by Rothbauerw). - And so many other updates, all documented in the script. Once again thank you to Herwey, nFozzy, apophis, Aubrel, Wylte, Rik, Rajo Joey, iaaki, BountyBob, rothbauerw, tomate, PinStratsDan, and Lumi for testing, and feedback!! -
View File New Wave (Bell Games 1985) New Wave was a conversion kit done by Bell Games in 1985; utilizing a full reuse of Black Pyramid. Since I just finished Black Pyramid, it was very straightforward to use that as a baseline for the New Wave conversion kit. @redbone spent a lot of time getting the playfield, plastics, bumpers, targets, and other images just right. He was able to utilize some prior work that @cyberpez did as well. I've included TONS of options in there, as it was a kit, and it appears that lots of different items could be installed. Also Cyberpez requested I add some options he was working on years ago. So, there are alternate plastics, bumpers, flippers, targets, rollovers, rollover lights, led edge lighting, and lots of ball choices... including a few glowballs. All changeable in the F12 menu. I was also able to reuse some work that was done on the cabinet for VR and the backglass. I think Devious626 did lots of that work in the past. And hauntfreaks did some effort in the past on the backglass. Those images have been incorporated as well. I implemented the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, roth drop and standup targets, a swinging target, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target images, and bumpers. Lots of hours were spent studying gameplay videos to match the table skill shots and physics action. There are options included in this table via the F12 menu including colors for balls, flippers, screws, LED plastics, rollovers and lights, bumpers, plastics, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Also NOTE: Just like Black Pyramid, Bally recommends to ensure that the self-test position settings for the ROM menu items for 16,17,18,19 are set to "03". Here is the procedure to do this. I've included the nvram in the zip file as well, so if you want to bypass that step and use it instead. Here is the procedure to set the self-test positions on this Bally 35 MPU table: 1. Press 7 to enter test mode. Continue to repeatedly press 7 until you see 01 appear in the ball in play/match display 2. Press and HOLD the 1 key until it reaches the value you want to set it to (start with 16). The value will increase by 1 while you are holding in the 1 key. If you happen to go past the value you want to set it to, while holding in the 1 key press and release the 7 key. The value will then decrement by 1 while you are holding in the 1 key. When you reach the value you want, release the 1 key. Set the value to 03. 3. Repeat pressing 7 to scroll the remainder of the settings (17,18,19) and change values to 03 in the similar manner. 4. Press F3 to save your changes and reset the table. Required Software (64-bit versions): VPX 10.8.0 RC7 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2046-043fac7 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1194-0474eb3 Submitter UnclePaulie Submitted 01/16/25 Category VPX - Pinball Tables VPX Standalone Yes
-
Version 2.0.2
2614 downloads
Dragonfist, the blackbelt of pins. It's the habit that's hard to kick! Dragonfist has something that keeps the pin player coming back for more. The backglass shows the number of spinner revolutions and can give the player a special bonus when 20, 40, 60, or 80 revolutions hit. Dropt Targets in the right and left orbit lanes, and a fun to hit spinner. It's a tough game to beat, a hard habit to kick, because Dragonfist is the blackbeld of Pins. Thanks to Redbone for providing me with a freshly stitched playfield, and for helping with upscales and lots of other graphics. Redbone also took lots of videos and pictures of an real table to help me in recreation. And thanks to Hauntfreaks and Redbone for providing me with an upscaled backglass for VR. Thanks also to the VPW team for testing and feedback! The whole table was done utilizing latest VPW standards for physics, lighting, GI baking, 3D inserts, shadows, drop targets, 3D inserts, etc. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and physics action. There are plenty of options included in this table via the F12 menu including colors and marks for all targets, bumpers, flippers, walls, spinners, and LED plastic edges. There are also multiple VR room environment and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). I've included default settings for the ROM options hard coded into the script. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Ball options are also available in the script. All other options are in the F12 menu. PLEASE NOTE: There is ANOTHER option for an updated ROM. If you use the alternate ROM... you will see the high spins to date on the Player 4 LED display during the high score attract mode. ALSO, it will preset the Max Credits to 00 (essentially putting it in freeplay mode). IF you want to change to have credits put in, you'll need to follow the instructions here: https://www.vpforums.org/index.php?app=tutorials&article=109 . Essentially to increase max credits... press 7 to open the ROM menu, keep pressing 7 until you see 18 in the display, then LONG press the "1" key to increase the max credits. The max credit change is only needed for the alternate ROM, not the default one. (I will also include the ROM change description in the zip package). Version 16 (found here: Version 16 alternate ROM REQUIRES VPINMAME 1122 or later Required Software (64-bit versions): VPX 10.8.0 RC4 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1975-051104c B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1122: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1122-79a301d -
View File Black Pyramid (Bally 1984) The legend known as Black Pyramid lives again through the far corners of Bally's 1984 pinball machine! This is a great play and challenging table. The main goal is to achieve 10,000,000 points to get a free game according to several reviews of game play. A good overview of the rules can be seen here: https://www.youtube.com/watch?v=YEZIFjQppR4 This was a definite challenge to create as there wasn't a good playfield available, however thanks to Redbone for spending countless hours creating a playfield from various images on the web. And thanks to Apophis for helping me with various Blender techniques to obtain a solid VLM GI bake, as well as physics testing. I was able to utilize various images, videos, and Redbone's playfield to get accurate placement of everything, and then implemented the latest VPW standards for physics, GI VLM, 3D inserts, AllLamps routines, shadows, updated backglass for desktop, Roth drop and standup targets, a swinging target, standalone compatibility, sling corrections, default and optional DIP adjustments, updated flipper physics, VR and fully hybrid, Flupper style bumpers and lighting. Redbone also updated the plastics, target images, and bumpers. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and physics action. Significant time was also spent on implementing a center swinger target solution to be a combination of Roth standup targets and the swinger target approach done by Loserman on Space Oddesy. There are options included in this table via the F12 menu including colors for balls, flippers, screws, and brightness of bumpers when off and when lit. There are also multiple VR room environments and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). Please NOTE on the ROM settings: The default settings for the ROM options are hard coded into the script and are based on the recommended values from Bally for 3 balls. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Also NOTE: Bally recommends to ensure that the self-test position settings for the ROM menu items for 16,17,18,19 are set to "03". I recommend doing immediately when you first launch the game. Here is the procedure to set the self-test positions on this Bally 35 MPU table: Press 7 to enter test mode. Continue to repeatedly press 7 until you see 01 appear in the ball in play/match display Press and HOLD the 1 key until it reaches the value you want to set it to (start with 16). The value will increase by 1 while you are holding in the 1 key. If you happen to go past the value you want to set it to, while holding in the 1 key press and release the 7 key. The value will then decrement by 1 while you are holding in the 1 key. When you reach the value you want, release the 1 key. Set the value to 03. Repeat pressing 7 to scroll the remainder of the settings (17,18,19) and change values to 03 in the similar manner. Press F3 to save your changes and reset the table. Required Software (64-bit versions): VPX 10.8.0 RC7 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-2046-043fac7 B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1194: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1194-0474eb3 Submitter UnclePaulie Submitted 01/05/25 Category VPX - Pinball Tables VPX Standalone Yes
-
View File Dragonfist (Stern 1981) Dragonfist, the blackbelt of pins. It's the habit that's hard to kick! Dragonfist has something that keeps the pin player coming back for more. The backglass shows the number of spinner revolutions and can give the player a special bonus when 20, 40, 60, or 80 revolutions hit. Dropt Targets in the right and left orbit lanes, and a fun to hit spinner. It's a tough game to beat, a hard habit to kick, because Dragonfist is the blackbeld of Pins. Thanks to Redbone for providing me with a freshly stitched playfield, and for helping with upscales and lots of other graphics. Redbone also took lots of videos and pictures of an real table to help me in recreation. And thanks to Hauntfreaks and Redbone for providing me with an upscaled backglass for VR. Thanks also to the VPW team for testing and feedback! The whole table was done utilizing latest VPW standards for physics, lighting, GI baking, 3D inserts, shadows, drop targets, 3D inserts, etc. Dozens and dozens of hours were spent studying gameplay videos to match the table skill shots and physics action. There are plenty of options included in this table via the F12 menu including colors and marks for all targets, bumpers, flippers, walls, spinners, and LED plastic edges. There are also multiple VR room environment and other VR options all done via the F12 menu. You can also change the ROM sound volume in the F12 menu. (Note if you want to change the ROM volume, you'll need to restart the table after the change.). I've included default settings for the ROM options hard coded into the script. If you want to change the ROM settings themselves, you need to change the "SetDIPSwitches to 1" in the script, and then use the F6 menu to change. Ball options are also available in the script. All other options are in the F12 menu. PLEASE NOTE: There is ANOTHER option for an updated ROM. If you use the alternate ROM... you will see the high spins to date on the Player 4 LED display during the high score attract mode. ALSO, it will preset the Max Credits to 00 (essentially putting it in freeplay mode). IF you want to change to have credits put in, you'll need to follow the instructions here: https://www.vpforums.org/index.php?app=tutorials&article=109 . Essentially to increase max credits... press 7 to open the ROM menu, keep pressing 7 until you see 18 in the display, then LONG press the "1" key to increase the max credits. The max credit change is only needed for the alternate ROM, not the default one. (I will also include the ROM change description in the zip package). Version 16 (found here: Version 16 alternate ROM REQUIRES VPINMAME 1122 or later Required Software (64-bit versions): VPX 10.8.0 RC4 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1975-051104c B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1122: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1122-79a301d Submitter UnclePaulie Submitted 10/22/24 Category VPX - Pinball Tables VPX Standalone No
-
View File Sorcerer (Williams 1985) Let the Sorcerer work a little magic for you! I've done a few versions of this table in the past, as well as other authors. The past versions I did built on older versions. Apophis reached out to me that the physics weren't quite right on the other tables, as he plays one a lot in the arcade. So, I completely overhauled the table to version 4.0 and essentially started from scratch, reusing only a few primitives. Redbone worked a new playfield, plastics, and other graphics for me. I did a full implementation of current VPW standards, physics, targets, 3D inserts, playfield mesh, VR, hybrid, baked GI lighting, shadows, etc. There's an F12 menu with some options in there. Also thanks also to Primetime5k, who helped me get staged flippers implemented and tested. Note: a new alternate gsound was recently released, however if you choose to use that, the ROM volume option needs to be at 0... which is default. However is you don't use gsound, I recommend turning that ROM volume down to -12 or something... as it can get a bit annoying if too loud. Also, you can turn off the background sound. Instructions for that and others are at the bottom of the script, however, here's the instructions as well: ROM Instructions and example to turn off background sound Start table as usual Press (8) to get into ROM menu Press (7) to start correct advancement Press (8) several times until 04 is shown in the Credit Display. 'Auto-Up / Manual-Down switch is controlled by (7) Press (8) repeatedly until you get to the adjustment number desired. For example, background sound is defaulted to on. It is adjustment number 35. You'll see a 1 in the upper left display. Press (1) to change that value. To turn off sound, set the value to 0. Note: Press (7) to reverse the advancement up or down. (9) will exit/reset Note: Auto-Up / Manual-Down (7) also controls the direction the menus will advance Enjoy, and hopefully you also feel that the physics and table play much harder, and closer to the actual table. Thanks again to Redbone, apophis, and Primetime5k, as well as the VPW team for testing. Required Software (64-bit versions): VPX 10.8.0 RC4 or later: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1975-051104c B2S Server 2.1.2 or later (if B2S used): https://github.com/vpinball/b2s-backglass/releases/tag/v2.1.2 VPinMame 3.6.0-1122: https://github.com/vpinball/pinmame/releases/tag/v3.6.0-1122-79a301d Submitter UnclePaulie Submitted 12/22/21 Category VPX - Pinball Tables VPX Standalone Yes
-
View File Safe Cracker (Bally 1996) Bally's Safe Cracker combines pinball and board games! The goal is to advance to the board game for a chance to break into the safe while avoiding obstacles along the way. Players spin and stop the safe dial to determine how many spaces to advance. The player can collect winnings and resume playing pinball after each dial spin, or spin again and risk losing it all. Players must risk it all for a chance to break into the bank vault and win the token award. The original 1.0 version was done by fuzzel, flupper1, rothbauerw; with the VR room originally being done by b4ast1. Apophis requested that I update the table with an updated playfield scan from EBisLit, and include all the new VPW code, 3D inserts, hybrid mode, physics, drop, standup, and vari-targets, bumpers, flashers, playfield mesh, fleep sounds, etc. Redbone further cleaned the playfield up, as well as some other images. I was able to bake the GI lights using blender light maps to make it look as real as possible (thanks for teaching me, apophis!), as well as implementing a pwm approach to the fading. I've also included other VR rooms, a topper, a flasher/siren, and F12 options. I reused the ramps and other prims from fuzzel's table, as well several pieces of code from rothbauerw. Other options in the script include a constant called, "useownb2s". If you set this to 1, you will turn off the desktop built in backglass. This is for desktop users that want to use a b2s backglass, not the built in one. MAGIC TOKENs... if you win the board game, the table will issue you a magic token (you'll see the coin roll down). How the ROM works... is the next game played will force you to use the magic token/s that you've won, and you play a 4 ball multiball for 90 seconds. Awesome! But you need to earn the tokens... REQUIREMENTS: ROMs: You will need two ROMs: A percentaging version is for the number of tokens issued is limited based on the game's earnings, and in a home environment you want to be able to obtain tokens. They are located here: https://vpuniverse.com/files/file/5161-safe-cracker-18-no-percentaging-s11/ https://vpuniverse.com/files/file/5162-safe-cracker-18-s11/ VPX: version 10.8.0 RC3 or higher: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1947-3b3f101 VPM: version 3.6.0 or higher: https://github.com/vpinball/pinmame/actions/runs/8893510521 B2S: version 2.1.1 or higher (if using b2s) https://github.com/vpinball/b2s-backglass/releases Two versions of the b2s are available... one for 2 screens from wildman, and one that is 3 screens by ryguy417. https://vpuniverse.com/files/file/6999-safe-cracker-bally-1996/ https://vpuniverse.com/files/file/13623-safe-cracker-bally-1996-b2s-with-full-dmd/ Thanks to apophis, rothbauerw, ebislit, fuzzle, flupper1, redbone, and many others from the VPW team for testing and feedback. Submitter UnclePaulie Submitted 05/02/24 Category VPX - Pinball Tables