Modified (MOD) Games

Followers 4

13 files

Sort By

Transformers Pro (Stern 2011) v2.1 (DT-FS-FSS-VR)

By RobbyKingPin

Autobots roll out!

This great table has been in the hands of many before I touched it.
gtxjoe and freneticamnesic made the first version in VP 9.9.
JPSalas made the VPX version.
HauntFreaks made the detail mod.
UnclePaulie brought JP's version into VR.
SG1bsoN made the lighting mod based of HauntFreaks version.
And this mod started out as SG1bsoN's version.
It has branched off so much from the first VPX version.
JP also kept on updating and innovating his version.
So I decided to try to merge it all back into this VR-hybrid version.
I have learned a lot from the VPW Example Table and had so much help, guidance and feedback from the very best!

Update v.2.1:
The older versions got broken by an update on VPinMame, all the PWM flashers were no longer being lit.
So this was very experimental when I started and updating it to the new norm brought many more problems, all JP's fading codes didn't work so all the inserts were all not responding correct any longer.
So I basically had to throw out everything and start over, so I did exactly that and much more.
Compared to the old version there is so much more stuff added like Flupper's 3D inserts and edited playfield with cutouts and edited primitives on the Flupper Domes.
The Allspark works like a Flupper Dome, new PWM on GI.
All inserts now work automaticly with the power of the latest VPX 10.8, so this table no longer supports VPX 10.7 but is built to last for years now.
I also updated all nFozzy/Rothbauerw physics to the latest standards.
And I added support for FSS so all formats are now fully supported.
I reached out to our soldier DarDog81 to help me get a second VR room and he exceeded all of my expectations.
He added a massive battleground of a destroyed city where Optimus Prime and Megatron are duking it out for all eternity and some supporting cast as well really putting the VR experience to the max.
To me this is more than just a update, it's almost a total new game but this is my passion and I hope it shows.

This table requires VP 10.8 RC3 and VPinMame 3.6-929 or higher when available to ensure the best gameplay experience and supports both 32 and 64 bit.
I would only recommend using released versions and try to stay away from the actions page because it seems like for every fix they got they also can break something else.
Only if you are having performance issues I'd carefully try one of those versions I don't recommend.
That's on your own risk to do so.

VR-Hybrid version by RobbyKingPin, TastyWasps, Retro27, HauntFreaks, HayJay, Nestorgian, fluffhead35 & DaRdog81

This mod contains the following improvements:
- nFozzy/Rothbauerw physics and Fleep sound with Rothbauerw standup targets
- VPW Dynamic Ball Shadows
- VPW Options UI with LUT and a great amount of customized items to choose like custom aprons, instruction cards, sideblades and speakerpanels
- PWM GI, flashers and inserts plus the option for non modulated lights and a failsafe if you don't use VPinMame 3.6, altough you really should because PWM is looking really good
- Flupper Domes, Inserts and Allspark
- Support for DT, FS, FSS and VR
- Compatible with the Standalone player
- 2 VR Rooms

Perfect pairing with backglass made by HauntFreaks.

Or perfect pairing for players who prefer the pup-pack made by TerryRed. This also works in VR replacing the original backglass.

Who did what on this project?

RobbyKingPin:
- nFozzy/RothbauerW physics,Fleep sound and VPW Dynamic Ball Shadows added (Updated v.2.1)
- VPW Options UI with LUT and a great amount of customized items to choose
- Flupper Domes plus extra options like the new PWM flashers added with help from Apophis (PWM requires VPinMame 3.6 but the table will still run in 3.5 on simpler modulated flashers)
- More light tweaks to more modern standards based on VPW's settings (Updated v.2.1)
- Added an extra trigger on the Allspark saucer to let the ball roll over at high velocity, thanks to gtxjoe for the tip
- Adjusted the height on a non working switch on the left ramp
- Left ramp adjusted height suggested by Apophis
- Right ramp slightly adjusted for cleaner shots suggested by Sixtoe
- Inlane speed limiters, code created by Wylte and copied from VPW's Johnny Mnemonic
- New ball image HDR and scratches based on VPW's tables
- Added new hit animation on Optimus Prime (v.2.0.1)
- Fixed a few sound issues, some were clashing with Fleep sound (v.2.0.1)
- Lowered the Mudflap and Skids targets (v.2.0.1)
- Flipper Collision Cradle code added (v.2.0.2)
- Fixed an issue with the ball release sound (v.2.0.2)
- Added and resized new custom sideblades with a primitive, new custom DMD/Speaker panels and a new custom apron (v.2.0.3)
- Created a new primitive for the 4th custom DMD/Speaker panel in high detailed and low poly versions (v.2.0.3)
- Fixed Fleep codes being too loud (v.2.0.3)
- Updated PWM on flashers, GI and Inserts and added 3D inserts and converted 1 pair of inserts and Allspark to work with Flupper Domes (v.2.1)
- Added RothbauerW Standup Target codes (v.2.1)
- Added new apron primitive from VPW's AD/DC and created a new custom apron on top. Added sidewood in the playfield cutouts. Converted png images to webp (v.2.1)

TastyWasps:
- VR Templates added, assets from UnclePaulie used.
- Changed light settings based on chokeee's settings on Elvis.
- Hotfixed the pincab rails giving issues in VR for some people (v.2.0.1).

Retro27:
- Custom VR cabinet with Tournament mode button and adjusted backbox.
- New textures for the cabinet.
- New Apron and new textures for the apron and instruction cards.
- JP's custom sideblades added.
- Tournament Topper and Custom Decal for the DMD/Speaker panel.
- Added new primitive for the final custom DMD/Speaker panel (v.2.0.3).

HauntFreaks:
- HQ Backglass image created.
- New textures for the VR room created (v.2.0.3).

HayJay:
- Slight tweaks to Optimus Prime area and Allspark saucer area.

Nestorgian:
- Fixing issues with balldrop sounds on the ramps.

fluffhead35 (v.2.0.1):
- Updated the hit events on the end ramps. Changed the materials on both end ramps. Adjusted right end ramp to be like left end ramp.
- Added Ball Drop sound on right ramp.
- Fixed the options menu from showing on the textbox, thanks to apophis.
- Added hit sound to metal wire below flipper.

DaRdog81 (v.2.1):
- Added VR Mega Room

Special thanks to everybody involved during development and testing: Smaug, PinStratsDan, Primetime5K, Hay Jay, gtxjoe, bietekwiet, Wylte, BountyBob, Nestorgian, fluffhead35, redbone, DarthVito.

Shoutout to Apophis, iaakki, jsm147, Sixtoe, Carny Priest, Smaug, Peter Cullen, Christopher Collins, Scatman Scotters, Cliffy, SG1bsoN, HauntFreaks, UnclePaulie, JPSalas, gtxjoe, freneticamnesic, Draifet, Bord, BorgDog, ROM and Slamt1lt.

- If I didn't mention anybody else in this development cycle I am unaware of this and just know that I still think you are awesome and also want to say you rock!
- And basically everybody from VPW I didn't mention just for welcoming me into my new family, you all absolutely rock!

When I missed a credit please send me a message to fix the credits, don't be rude to throw in 1 star reviews for making a human mistake.

7238 downloads
(35 reviews)
105 comments

Updated Saturday at 04:34 PM
The Sopranos Siggis Mod

By Siggi

This is a Mod of TastyWasps The Sopranos table.

Thank you to all the previous authors who worked on this table which include:
JPSalas, Freneticamnesic, 32assassin, randr, zany, dark, bodydump, Sixtoe

And a special thank you to TastyWasps for a his great work to make this tables so much better.

I made a completely new art package.

Playfield, plastics, backwall and small changes to the primitive textures.

There is a second playfield with a black and white sopranos picture inside this table.
You can change it in the image manager.

Hope you like it and keep on playin' pinball.

Siggi

1220 downloads
(13 reviews)
36 comments

Submitted February 22
Terminator 3 (Stern 2003) Siggis Mod (JP)

By Siggi

This is a mod of JPs Terminator 3 table.

A very special thanks to JP for his permission to upload this mod.

He is a really great guy. Thanks.

I love this table but i don't like the original graphics.

That's why i made this mod.

What's new:

New Graphics for playfield, plastics, backwall, sidewalls and apron.
Played a bit with the GI and some small other changes.

I hope you like it...

...and keep on playing pinball

Siggi

4475 downloads
(30 reviews)
55 comments

Updated February 22
Test Pilots

By Anthias

Anthias original theme mod of
Playboy 35th anniversary by JPSalas , Based on the table by Data East from 1989
TEST PILOTS uses original artwork, music and sounds. It is not a licenced theme or existing IP, any similarity to exisiting IP is coincidental. This is not a recreation. The layout has also had some modifications but still resembles the doner table.
Enormous help from:
JPSalas for physics, flippers, ball sounds
Ichigo for B2S crash course, and his amazing work on the backglass which made it all possible.
Both these guys are absolute legends.
GAME SPECIFIC FEATURES
TOP LANES: Completing lanes steps up the Bonus Multiplier to 2x, 3x, 4x & 5x. etc. You can rack up more times than the lights, they all flash when you exceed 5x.
FIGHTER: Spell FIGHTER by hitting each of the targets and receive the value of all "bombs" lit in the left hand collumn of lights. EG if you have lit the first three you will recieve 50k, 100k and 150k for a total of 200k. The bombs in the left collumn are lit by hitting the kicker near the left in lane. They are each 50k more than the light before them. So if you light them all you get 50k+100k+150K+200k+250k+300K.
Shoot the left and right ramps to re-light the kick back in the left out lane.
HANGER X : Any ramp shot spots a letter in the word HANGERX shown on the displays and back panel. Spelling the word HANGERX then shooting the ramps again increases the table multiplier by 1. ALL scoring is multiplied by this figure, (5x maximum, at 5 the three X lights will flash.) so after the first time completing it, scoring is doubled, second time tripled etc.
Drop the drop targets to set the target set light flashing, drop again to activate STEALTH MODE. STEALH MODE lasts one minute and DOUBLES all points on the table!
PROTOTYPE LAB: Complete the centre target bank Prototype targets in the prototype lab to light right hand bomb collumn lights. When all are lit, a final hit of the three targets lights the shot to the right of the top lanes. Hit that to light the kicker near the left in lane, hit that to activate the left ramp diverter to infiltrate the enemy hanger and steal their plans. Then shooting that ramp will access the apron ramp and kicker, activating a 4 ball multiball mode. During any multiball, scoring doubles.
STRATOSPHERE MULTI-BALL: Lock 2 balls in the stratosphere to enable the multiball feature. Shooting either ramp shot releases the locked balls. During any multiball, scoring doubles.
LOOP SHOTS: Hit left or right lamp to light loop shots. Hit them again for doubled points, growing exponentially until the loop time expires.

79 downloads
(0 reviews)
1 comment

Submitted January 31
The return of the living dead

By balutito

Another little twist, The Walking Dead become The return of the living dead.

Thanks to the original creators of the table:
TABLE BY ICPJUGGLA AND FRENETICAMNESIC
SCRIPT BY FRENETICAMNESIC AND GTXJOE
MODELS BY FRENETICAMNESIC, RANDR, FLUPPER, DARK, AND ZANY
RESOURCES PROVIDED BY NORTHVIBE, URIELL, PAULO, AND PINBILL

You will need to install Music in your music folder.
And create a new line in your VPMAlias.txt file: twd_156ld, twd_156h

ENJOY
Balutito
Yes the dmd is still that of Walking Dead, I know, if you want to try to modify everything, do yourself a favor.

Special thank's to the Evil Eye Art Uk for the artwork
All Logos, Copyrights and Trademarks are property of their respective owners.

PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

4098 downloads
(10 reviews)
42 comments

Updated January 31
The Grinch ( original 2023 )

By World-of-Virtual-pinball

Original Table by Jpsalas , then modded by pinballfan2018 with a WIP DMD PupPack, This was corrected by Dark Phoenix Group and is working correctly now. Download includes all files and custom made Media pack by Skully63

JPSalas has given authorisation for this to be uploaded.

Please follow us at https://www.facebook.com/groups/worldofvp/

757 downloads
- vpx
- wvp
(5 reviews)
23 comments

Submitted December 8, 2023
The Labyrinth

By ZandysArcade

Jim Hensons The Labyrinth Pinball

Complete with Pup-Pack and Media pack. Everything in link below.

https://mega.nz/folder/eMA0lB4J#cS3MjmlRtoE7vBlQypu9-w

Based on the 1986 film about a sixteen-year-old girl named Sarah who is given thirteen hours to solve a labyrinth and rescue her baby brother Toby when her wish for him to be taken away is granted by the Goblin King Jareth played by the late David Bowie.

This was my all time favorite movie as a kid (I have seen it about 1000 times) and felt it would be a fun and magical table for adults and children alike.
Thanks to @balutito, @Nesta78 and the original creator of the first Labyrinth table @JPWolloff for giving me their blessings to create this table.
Thank you @JoePicasso for your helpful knowledge and 3D Models. Always appreciated.

Thank you to all people who have worked on the initial Skateball table including JPSalas and anyone else I may have missed and/or learned from since starting this hobby.

The Download Includes Table, Pup-Pack, Full DMD, Backglass and Loading Video, Instruction Card, Wheels and Playfield video.

Music from the film Plays in the background of the Pup-Pack and can be changed during play.

As always, you can choose between different options with .bat files in the pup pack folder based on your preference.

Don’t forget that if you are already using Skateball rom with another table, you will need to add an alias in VPMAlias.txt located in the VPinMame Folder. If you don’t know how just ask and I will try to assist you. To mute the rom hit F1 on your keyboard and uncheck Use Sound.

Fun Facts:
1. Michael Jackson, Sting, Prince and Mick Jagger were all candidates to play the Goblin King!
2. The Labyrinth is the first Film to have a realistic CGI animal in a film seen with the owl in the beginning sequence.
3. Jareth's face is hidden in seven scenes in the movie, watching Sarah as she tries to solve the labyrinth.

Happy Gaming and thank you to everyone that is a part of making this hobby fun and exciting. If you have any questions please let me know!!!!

-Jo Gandy

1059 downloads
(8 reviews)
4 comments

Updated December 8, 2023
Target Alpha (Gottlieb 1976) Teisen MOD_VR ROOM

By DarthVito

VR Room with LUT selector for Teisen's table.

260 downloads
(1 review)
9 comments

Updated November 24, 2023
The Last Unicorn Pup Pack Version

By ZandysArcade

Last Unicorn Pup Pack Version

Table and Pup-pack in link below:
https://drive.google.com/drive/folders/1G6yFaDptVa_sL-VQ-K5_0IGphZuUNI3r?usp=sharing

The Last Unicorn is a 1982 American animated fantasy film about a unicorn who, upon learning that she is the last of her species on Earth, goes on a quest to find out what has happened to others of her kind. Based on the 1968 novel The Last Unicorn written by Peter S. Beagle, who also wrote the film's screenplay. Great for kids or if you are just a fan of this movie or unicorns!

This is the table created by wpilot a MOD of JP's Miraculous Pinball. Used and created with permission from author. All credit for the table goes to them.
I created the pup pack and added the 3D Model and animations to the pup version of the table. The DMD is separated from the backwall so it can but put on any screen. Full DMD included in pup-pack.
Has music options in the Pup than can be changed during play using magnasave/ enter buttons.

You must use this version of the table with the pup-pack.
Pup-pack goes in the Pupvideos folder
No Alias or Rom required
Choose your .bat option and enjoy.

Huge thanks to @wpilot for letting me create the pup version.

@JoePicasso,@BurtMacklin, @Gman77 for their assistance

Happy Gaming!

199 downloads
(5 reviews)
1 comment

Updated September 23, 2023
The Real Ghostbusters (JPs Ghostbusters mod)

By jonpfeiler

I love jpSalas's Ghostbusters:Slimer, but I needed a "Real Ghostbusters" table as I grew up watching the cartoon every Saturday morning. This is a partial reskin, as I replaced many of the images with images from the cartoons but not everything. I replaced the floating Slimer model with the cartoon Slimer, and the Ecto1 with the model from the cartoon, as well as made sure the proton pack is the correct blue and yellow from the show. 90% of the sounds and music have been replaced with content from the show. I hope you enjoy

2518 downloads
- ghostbusters
- jp
- (and 2 more)
  Tagged with:
  - ghostbusters
  - jp
  - cartoon
  - vpx
(13 reviews)
19 comments

Updated September 5, 2023
They Live

By balutito

I share with you here, the @SpookyMoulder They LIVE table
I redid the board and a few little things here and there

If you play on cabinet, please don't try to move the DMD, it is planned to be here on the apron.

This table is the result of the work and pooling of many people around the world.
It represents the good understanding, the cordiality, the friendship of the users of VPX, who are united to offer you a quality table.
Thanks to Jp Salas, @SpookyMoulder, @Cliffy, jogrady7, @BurtMacklin and all those who have contributed and tried to solve the problems encountered

New music by ΦΩΝΟΠΤΙΚΟΝ, you can change it in Soundmanager if you don't like (check => theylivec)

Good Game
All Logos, Music, Copyrights and Trademarks are property of their respective owners.

PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

1010 downloads
(9 reviews)
29 comments

Updated June 30, 2023
Tiger King (ReTheme 2020)

By iDigStuff

Reupload from vPinball.
Enough people asked, yes I'm as surprised as you are.
It may not be a VPW release but it makes me laugh every time.

Tiger King (Retheme 2020) 1.2
Artwork and concept - jicarlin
Music and sound - iDigStuff
Original Table - JPSalas

Tiger King mp3 folder goes into VPX Music folder

368 downloads
(0 reviews)
7 comments

Submitted March 26, 2023
Tarzan LEX Barker Tribute Edition (Iceman 2023) Reskin

By icepinball

Tarzan LEX Barker Tribute Edition (Iceman 2023) Reskin

All logos, characters, copyrights and trademarks are the property of their respective owners.

I thank everyone who created the basis for the table. It is based on Wolf Man (Peyper 1987) and genius artis at 2assassin and
Goldchicco and mfuegemann (Based on vp9 table by: mfuegemann) more creators thanks to the genius artists.
Reskin for Tarzan LEX Barker Tribute Edition .... NOT FOR SALE

FOR PERSONAL USE ONLY AND NOT FOR COMMERCIAL SALE OR DISTRIBUTION. PLEASE DO NOT DISTRIBUTE FINAL.

LEX BARKER (8. Mai 1919 - 11. Mai 1973)

I wanted to mirror with my tribute to lex parker as TARZAN
the old classic movies from the 50s and 60s I hope you enjoy it

He is also always remembered as Old Shatterhand !!!!

Have fun

Backglass, wheel in folder

Rom: wolfman.zip

605 downloads
(2 reviews)
8 comments

Updated January 8, 2023