Search the Community

FISH TOWN, An original future pinball table, Table rules, Lighting "FISH TOWN" will bring specials at the top kicker, ( special lasts for 120 seconds). Also hitting Green star targets( under green star holograms ) lights a chance for 15,000 point bonus, at the top right kicker, a chance for Bonus Multiplier Increase at the lower left ramp, ( bonus term lasts for 75 seconds). Replay scores on table card. ( It's a fun table with many new holograms). { Remember to use the nudge buttons if the ball gets stuck on the ramp.} ( Some very well made Midi renditions of Rock music were used for background music ).

Delighted to bring you a mod that has been made after a lot of time and work!, made from the spectacular Siggi mod and starting from the base of the highly appreciated Sliderpoint table. Thank you very much to both of you for giving me permission to do this work, you are geniuses, it has been a lot of fun! -New playfield improved and colored part by part. -New plastic colors and textures. -New coloring and lighting ramps. -Improved lights and inclusion of new ones. -Some sounds improved. -Change ball and light, flippers changed. And some other changes improved to my liking without, of course, detracting from the original tables of their authors. If someone wants to work on it to include new physics, luts or sounds, get in touch. Feel free to change the darkness of the table to your liking with the day/night mode from the editor. Combine it with the puppack and it will be spectacular! I hope you can like it and find it fun and exciting like me. Have fun!!

shivaFlippers is a replacement and a serious upgrade over the flippers used in all FP tables before it. shivaFlippers has more realistic shots, better control, and the unique variable coil system that simulates real flipper solnoids so you can vary the speed and strength of your shots. A good example of shivaFlippers and how it plays can be found in Jungle Girl fpx, which uses the 3.2 version, but will be upgraded to the new 3.3 version soon. This now uses a variable coil system throughout the flipper arch when you press the flipper button (just like a real table). It is designed to emulate a actual flipper coil in operation, in which the amount of power gradually increases the strength (omega to you devs) of the flipper. This new code will start the variable coil at it's beginning coil when a flipper button is pressed no matter what degree the arch of the flipper is at, at the lowest point, at the highest point, and any angle in between. This means that in theory (remember, FP has it's limitations and bugs) you should be able to do all the things and special tricks that the pros do that require a variable strength. This means flick and tap passes, and I have seen Loop passes as well. (accidental, not based on personal skill) This new version is a follow up to the previous version, based on previous comments and play from youtube videos, as well as new code additions and changes. My thanks to those that tested out the previous version, your comments (and videos so I can see different playing styles and find ways to improve shivaFlippers) were very helpful and I suspect you will find this version a lot better and more realistic when compared to the actual real world flippers. This uses and is adjusted to the "new template" in FP. There is a video of the last 3.2 version here: despite my poor playing, you can see how the flippers work. This new version though has been improved quite a bit. The next release of Jungle Girl and the future major update to fpxEngine will use this new code. There are some pretty major changes with 3.3, but if you look in the script, previous version changes are noted as they give a good idea on what shivaFlippers can do over stock or DF flippers. The latest shivaFlippers has a major new update that now supports dynamic Omega by flipper swing, (variable coil) and has a couple set tricks programmed in. (This depends on your hardware and reflexes) - Variable coil strength, which varies the strength of the flipper depending on the flipper angle * The amount of steps (or angles) are adjustable. Default set to 35. A lower number means stronger shots, a higher number means weaker shots * Changing FlipperSwingAngleEnd can make flipper tap passes easier (Higher Number) or harder (Lower Number) - Tip/tap pass for flipper start angle and max angle - The flipper strength gets stronger the longer you hold the flipper button. This means that tip to tip passing is possible, but so are "loft" shots. This adds a huge degree of skill not possible before. - Realistic EOS - Flippers have better bounce - New 2 wall method, with 3 triggers instead of timers - Adjustable realistic aiming of how the ball angle comes off the flipper. Version 3.3 (release notes) - Variable coil is now FULLY enabled no matter what angle the flipper is at. Drop catches, tap passes, flipper flicks, no matter where the flipper is, oh my ' - Triggers reworked. A opto trigger is now used as opposed to a large trigger ' - Large sections of this code was rewritten ' - Fixed walls interfering if flippers all the way up. Walls reshaped and new coding in place. Ball can no hit as wall underneath the flipper if the flipper is raised ' - Flippers quite a bit more "snappy" compared to 3.1 version. Better range with the variable coil ' - Any flipper slowdown greatly reduced, closer to "never" now ' - you can adjust at a certain speed of the ball for when the walls become active, below that speed the walls are inactive ' - Separate by contact point omega's redone. ' - Coding simplified. Pre-Hits have been rewritten to increase performance and dependability

This game is version 1.0 and dedicated to the little Lebowski urban league. Free to mod. Game has been tested. Ball did stick 2 times but was easily nudged loose. Sometimes in the basement when the pins reset the ball will lodge between pins. Sound effects echoed so i switched to simple sounds. Songs and music are cover songs from SoundCloud and all legal downloads.

Manufacturer: D. Gottlieb & Co. Date: August 1948 Design: Harry Mabs Art: Roy Parker Authors: Original Table: Fpozo45 Modifications: Okobojimusky Modifications in Version 1.1: Backglass now functional. Ball tray enlarged to prevent next ball being generated too soon by balls piling up or rolling around in tray. Scoring bugs fixed. Other bugs fixed. High Scores enabled.

Hi! here you have a wheel version of Pinball Magic (Capcom 1995) Enjoy!!!!

Hi! here you have a wheel version of The Simpsons Pinball Party (Stern 2003) Enjoy!!!!

Manufacturer: David Gottlieb & Co. Date: June, 1940 Design: Harry Mabs Art: Roy Parker Authors: Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Backglass fully functional. Ball tray enlarged to prevent next ball being generated too soon by balls moving around in tray. Scoring adjusted. Tilt adjusted.

Hi! here you have a wheel version of The Who's Tommy Pinball Wizard (Data East 1994) Enjoy!!!!

Manufacturer: David Gottlieb & Co. Date: June, 1955 Design: Wayne Neyens Art: Roy Parker Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Backglass now functional. Tilt adjusted. Bugs fixed.

Manufacturer: David Gottlieb & Co. Date: March, 1947 Design: Harry Mabs Art: Roy Parker Flipperless Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Backglass now functional. Ball tray trigger tank adjusted to prevent next ball being generated too soon by balls moving around in tray. Tilt adjusted. Scoring and other bugs fixed.

Manufacturer: David Gottlieb & Co. Date: July 1947 Design: Harry Mabs Art: Roy Parker Authors: Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Backglass fully functional. Ball tray enlarged to prevent next ball being generated too soon by balls moving in tray. High scores enabled. Tilt adjusted. Scoring and other bugs fixed.

Manufacturer: David Gottlieb & Co. Date: November 1945 Design: Harry Mabs Art: Roy Parker Authors: Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Backglass fully functional. Ball tray enlarged to prevent next ball being generated too soon by balls moving around in tray. Tilt adjusted. Scoring and other bugs fixed.

Manufacturer: David Gottlieb & Co. Date: May 1954 Design: Wayne Neyens Art: Roy Parker Authors: Original Table: Fpozo45 Modifications: Okobojimusky Modifications: Double Awards: Press Start Key a 2nd time (while 2nd Coin light is blinking prior to shooting 1st ball) to light & win double replays. Ball tray enlarged to prevent next ball being generated too soon by balls moving around in tray. Replays awarded for 50,60,70,80 & 90 points. Scoring and other bugs fixed.