-
What's Next?
No files in this category yet.
Files From Subcategories
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
The Walking Dead PRO Physmod 5 WIP 1.1
By RobbyKingPin
Desktop Patch for The Walking Dead PRO Physmod 5 WIP 1.1 by gtxjoe
Thank you gtxjoe for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.co...ch-32bit-64bit/
Download the original Table: "The Walking Dead Pro Physmod5 WIP 1.1 /http://vpuniverse.com/forums/files/file/3813-the-walking-dead-pro-physmod5-11/
Use the Mod: "The Walking Dead Pro Physmod5 1.1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
What's New in Version Experimental - PhysicsMo (See full changelog)
1.0 - added new Backdrop - change the values to create a desktop version
276 downloads
- The Walking Dead Pro
- Stern
- (and 4 more)
0 comments
Submitted
-
Transformers_v1.2_VP9.9_DT.zip
By coolball
Desktop Patch for Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt (coolball for the Desktop-Patch)
Thank you freneticamnesic and gtxjoe for the ultimate power of your table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Transformers (Stern 2011)(VP9.9 1.2) gtxjoe freneticamnesic.vpt" / http://vpuniverse.com/forums/files/file/3013-transformers-pro-stern-2011-fs-vp99-gtxjoe-freneticamnesic/
Use the Mod: "Transformers_v1.2_VP9.9_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
415 downloads
0 comments
Updated
-
Tron Physmod5_DT.zip
By coolball
Desktop Patch for Tron FS Physmod5.vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85Vett for this fast amazing table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Tron FS Physmod5.vpt" / http://vpuniverse.com/forums/files/file/2624-tron-le-stern-201185vett/
Use the Mod: "Tron Physmod5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
251 downloads
0 comments
Submitted
-
The Machine Bride of Pinbot
By unclewilly
My recreation of The Machine Bride of Pinbot
313 downloads
0 comments
Submitted
-
Tron (Stern 2011) (DT) VPUPatch
By coolball
Desktop Patch for Tron FS 1-4.vpt by 85Vett (coolball for the Desktop-Patch)
Thank you 85vett for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Tron FS 1-4.vpt" / http://vpuniverse.com/forums/files/file/2624-tron-le-stern-201185vett/
Use the Mod: "Trondesk1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
425 downloads
0 comments
Updated
-
The Rosve EM Collection
By rosve
A compilation of EM recreations that I made over the last couple of years.
They are all in Wide screen format (16:9)
Big Valley
Captain Fantastic
Central Park
Dipsy Doodle
Flash Gordon (re-themed 1965 Gottlieb pin "Ice Revue")
Mars Trek
See Saw
Skyrocket
327 downloads
0 comments
Submitted
-
Ten Strike Classic, (Benchmark Games, Inc) (2003) (Rascal) (1.4) (DT)
By Rascal
Ten Strike Classic, Benchmark Games, 2003, two players. This is a reissue and copy of the 1957 Williams Ten Strike. This new 10 Strike uses identical cabinet and art as the original, but has solidstate guts and LED style score displays (instead of score reels). Has two bells (one and ten points) for sound. Scores like regulation bowling, or with a flip of a switch, scores like the original 1957 Williams Ten Strike. Made in Korea specifically for Benchmark, and available only in the five foot length (unlike the original 1957 Williams Ten Strike, which came in both five and seven foot lengths).
Thanks go out to the following people:
Wizards_Hat (Dan) for helping me by doing the scoring script.
Noah Fentz (Paul) for getting me video and pictures from Marvin's Marvelous Mechanical Museum.
Marvin for his useful information about the machine on the web.
Benchmark Games for a copy of the manual.
richg (Rich) for putting me on to the challenge and getting me some pictures.
YouTube for video and sounds.
Beta Testers and Support are:
KEG, Pinball Buzz (Jon), Rawd (Rod), Sabbat (Freddie), gaminglord (Brad), yogiholzer (Jörg), NateD (Nate), and Bob5453 (Bob).
Version 1.3 Added alpha glass to the box around the bowler, thanks for the suggestion Monk.
Version 1.2 Added music to bowl by.
Version 1.1 Fixed a graphic issue with the bowler man being cut in half.
133 downloads
- Benchmark Games
- Ten Strike Classic
- (and 3 more)
0 comments
Updated
-
TheGyrussWS
By Stevoz
TheGyruss wide screen for VP9.
TheGyrussWS wide screen for VP9, best played @1920x1080.
Physics and flippers adjusted for VP9.
Many tweaks and some additions to the graphics, cutouts for drop targets and other adjustments.
1 to 4 players can play, press 5 to add credits and 1 to add players.
Game set to 3 balls, change line 26, balls = 3 to balls = (any value from 1 to 5).
A 1984 era SS pinball, made one year after the popular arcade game Gyruss, featuring sounds and graphics from the arcade.
Zip file contains the file gyruss.mp3 move this to you pinball/music folder for the gyruss arcade game background music.
A fairly fast and challenging game, fast reflexes required, features 4 top lanes with lane change, ballsave, 2 inlanes, 2 outlanes, 2 kickbacks, 16 drop targets, 2 spinners, 3 pop bumpers, 2 ball multiball, hold bonus, hold multiplier, extra ball, specials and jackpot.
Rules...
WARP awards 2x, 3x, 4x, 5x, 6x, 7x, 1000 pts x multiplier and lites bumpers, 100 pts or 1000 pts when lit.
THEGYRUSS advances 10000 per planet bonus to Earth and awards 2000 pts x planets.
BONUS lites Hold Bonus, Hold Multiplier, Extra Ball, Special and then awards Special and awards 1000 pts x BONUS resets.
XY lites top kickback, top kickback scores 2000 pts x XY resets.
MB lites multiball, M or B lites lower kickback, jackpot (50000 pts) lit during multiball and all scores x2.
All targets score 100 pts, All rollovers score 200pts
X increases left spinner value by 100 pts up to 700 pts per spin.
Y increases right spinner value by 100 pts up to 700 pts per spin.
Left out lane scores 3000 pts and extra ball when lit.
Right outlane scores 700 pts and extra ball when lit.
128 downloads
0 comments
Submitted