-
What's Next?
VPU Patching System - Table Modifications (DT)
8 files
-
0 comments
Submitted
-
0 comments
Submitted
-
AC-DC_PhysMod5_Helen_v.1.1c_DT.zip
By coolball
Desktop Patch for AC-DC_PhysMod5_Helen_rev.1.1c.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "AC-DC_PhysMod5_Helen_rev.1.1c.vpt" / http://vpuniverse.com/forums/files/file/3117-acdc-stern-2012/
Use the Mod: "AC-DC_PhysMod5_Helen_v.1.1c_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
620 downloads
0 comments
Updated
-
Austin Powers HR_ DT_v1.0_PhysMod.zip
By coolball
Desktop Patch for Austin Powers (Stern 2001) HR_ FS_VP9.9_Rev_1.0_PhysMod.vpt by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the cool table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Austin Powers (Stern 2001) HR_ FS_VP9.9_Rev_1.0_PhysMod.vpt" / http://vpuniverse.com/forums/files/file/3062-austin-powers-stern-2001-fs-physmod5/
Use the Mod: "Austin Powers HR_ DT_v1.0_PhysMod.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
159 downloads
0 comments
Submitted
-
Avatar_physmod5_DT.zip
By coolball
Desktop Mod for Avatar physmod5.vpt by 85Vett coolball for the Desktop-Patch)
Thank you 85vett for this fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avatar physmod5.vpt" / http://vpuniverse.com/forums/files/download/2565-avatar-stern-2010-85vett/
Use the Mod: "Avatar_physmod5_DT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
253 downloads
0 comments
Updated
-
Avengers_v1.2bDT
By coolball
Desktop Patch for Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt by gtxjoe (coolball for the Desktop-Patch)
Thank you very much gtxjoe for this fantastic table and the permission to mod.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avengers (Stern 2012) (1.2FS-VP921-VP990-gtxjoe).vpt" / http://vpuniverse.com/forums/files/file/2830-avengers-pro-stern-2012-gtxjoe-fs-vp921-vp990/
Use the Mod: "Avengers_v1.2bDT.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
591 downloads
0 comments
Updated
-
Avatar_v1.01b_DT.zip
By coolball
Desktop Mod for Avatar (Stern) (2010) (85vett).vpt by 85Vett and dup3d(for the BMPRlite2 Mod) / (coolball for the Desktop-Patch)
Thank you 85vett for the fantastic table and the permission to mod your table.
Thank you dup3d for the permission to use your BMPRlite2 Mod.
I used the Avatar Table by 85vett and the BMPRlite2 Mod by dup3d to create the Desktop-Patch.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Avatar (Stern) (2010) (85vett).vpt"
Use the Mod: "Avatar_v1.01b_DT.zip"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
398 downloads
0 comments
Updated
-
Austin Powers (Stern 2001) (DT) VPUPatch
By coolball
Desktop Patch for Austin Powers (Stern 2001)_HR_FS_VP9.2.1 _1.3 by Javier15 (coolball for the Desktop-Patch)
Thank you Javier15 for the fantastic table and the permission to mod your table.
Changes i´ve done
- added new Backdrop
- change the values to create a desktop version
- adjusts the flashers
Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod
http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/
Download the original Table: "Austin Powers (Stern 2001)_HR_FS_VP9.2.1 _1.3" / http://vpuniverse.com/forums/files/file/2705-austin-powers-stern-2001-hr-fs-vp921/
Use the Mod: "AustinPowersdesk1.dif"
Have fun
To Apply a patch:
a. If you do not already have the table that the patch was created for; you will need to download that file.
Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.
b. Make sure that you are on the "Apply Patch" tab located at the top of the window.
c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.
d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.
e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.
f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.
If you have made any changes to the original table release then this patch will not work.
216 downloads
- VPUPatch
- Austin Powers
- (and 2 more)
0 comments
Updated