-
SYSTEM SEARCH
System Scanners Online:
Username: Guest
>> System Scan?
>> The Universe >
Incoming Message:
Due to system limitations searching with words of 3 or less characters will not return results. For instance; Doctor Who. This will not return results as the system is trying to search for both Doctor AND Who in which Who will not be found as it's a 3 character word. To find Doctor Who; you'd search for either Doctor or "Doctor Who".
Search Tips:
For specific searches; enclose your search with quotes. Example: "Doctor Who" or "Addams Family".
Search the Community
Showing results for tags 'vpx vr'.
Found 20 results
-
Version 2.0.0
1449 downloads
Bally's Safe Cracker combines pinball and board games! The goal is to advance to the board game for a chance to break into the safe while avoiding obstacles along the way. Players spin and stop the safe dial to determine how many spaces to advance. The player can collect winnings and resume playing pinball after each dial spin, or spin again and risk losing it all. Players must risk it all for a chance to break into the bank vault and win the token award. The original 1.0 version was done by fuzzel, flupper1, rothbauerw; with the VR room originally being done by b4ast1. Apophis requested that I update the table with an updated playfield scan from EBisLit, and include all the new VPW code, 3D inserts, hybrid mode, physics, drop, standup, and vari-targets, bumpers, flashers, playfield mesh, fleep sounds, etc. Redbone further cleaned the playfield up, as well as some other images. I was able to bake the GI lights using blender light maps to make it look as real as possible (thanks for teaching me, apophis!), as well as implementing a pwm approach to the fading. I've also included other VR rooms, a topper, a flasher/siren, and F12 options. I reused the ramps and other prims from fuzzel's table, as well several pieces of code from rothbauerw. Other options in the script include a constant called, "useownb2s". If you set this to 1, you will turn off the desktop built in backglass. This is for desktop users that want to use a b2s backglass, not the built in one. MAGIC TOKENs... if you win the board game, the table will issue you a magic token (you'll see the coin roll down). How the ROM works... is the next game played will force you to use the magic token/s that you've won, and you play a 4 ball multiball for 90 seconds. Awesome! But you need to earn the tokens... REQUIREMENTS: ROMs: You will need two ROMs: A percentaging version is for the number of tokens issued is limited based on the game's earnings, and in a home environment you want to be able to obtain tokens. They are located here: https://vpuniverse.com/files/file/5161-safe-cracker-18-no-percentaging-s11/ https://vpuniverse.com/files/file/5162-safe-cracker-18-s11/ VPX: version 10.8.0 RC3 or higher: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1947-3b3f101 VPM: version 3.6.0 or higher: https://github.com/vpinball/pinmame/actions/runs/8893510521 B2S: version 2.1.1 or higher (if using b2s) https://github.com/vpinball/b2s-backglass/releases Two versions of the b2s are available... one for 2 screens from wildman, and one that is 3 screens by ryguy417. https://vpuniverse.com/files/file/6999-safe-cracker-bally-1996/ https://vpuniverse.com/files/file/13623-safe-cracker-bally-1996-b2s-with-full-dmd/ Thanks to apophis, rothbauerw, ebislit, fuzzle, flupper1, redbone, and many others from the VPW team for testing and feedback. -
View File Safe Cracker (Bally 1996) Bally's Safe Cracker combines pinball and board games! The goal is to advance to the board game for a chance to break into the safe while avoiding obstacles along the way. Players spin and stop the safe dial to determine how many spaces to advance. The player can collect winnings and resume playing pinball after each dial spin, or spin again and risk losing it all. Players must risk it all for a chance to break into the bank vault and win the token award. The original 1.0 version was done by fuzzel, flupper1, rothbauerw; with the VR room originally being done by b4ast1. Apophis requested that I update the table with an updated playfield scan from EBisLit, and include all the new VPW code, 3D inserts, hybrid mode, physics, drop, standup, and vari-targets, bumpers, flashers, playfield mesh, fleep sounds, etc. Redbone further cleaned the playfield up, as well as some other images. I was able to bake the GI lights using blender light maps to make it look as real as possible (thanks for teaching me, apophis!), as well as implementing a pwm approach to the fading. I've also included other VR rooms, a topper, a flasher/siren, and F12 options. I reused the ramps and other prims from fuzzel's table, as well several pieces of code from rothbauerw. Other options in the script include a constant called, "useownb2s". If you set this to 1, you will turn off the desktop built in backglass. This is for desktop users that want to use a b2s backglass, not the built in one. MAGIC TOKENs... if you win the board game, the table will issue you a magic token (you'll see the coin roll down). How the ROM works... is the next game played will force you to use the magic token/s that you've won, and you play a 4 ball multiball for 90 seconds. Awesome! But you need to earn the tokens... REQUIREMENTS: ROMs: You will need two ROMs: A percentaging version is for the number of tokens issued is limited based on the game's earnings, and in a home environment you want to be able to obtain tokens. They are located here: https://vpuniverse.com/files/file/5161-safe-cracker-18-no-percentaging-s11/ https://vpuniverse.com/files/file/5162-safe-cracker-18-s11/ VPX: version 10.8.0 RC3 or higher: https://github.com/vpinball/vpinball/releases/tag/v10.8.0-1947-3b3f101 VPM: version 3.6.0 or higher: https://github.com/vpinball/pinmame/actions/runs/8893510521 B2S: version 2.1.1 or higher (if using b2s) https://github.com/vpinball/b2s-backglass/releases Two versions of the b2s are available... one for 2 screens from wildman, and one that is 3 screens by ryguy417. https://vpuniverse.com/files/file/6999-safe-cracker-bally-1996/ https://vpuniverse.com/files/file/13623-safe-cracker-bally-1996-b2s-with-full-dmd/ Thanks to apophis, rothbauerw, ebislit, fuzzle, flupper1, redbone, and many others from the VPW team for testing and feedback. Submitter UnclePaulie Submitted 05/02/24 Category VPX - Pinball Tables
-
Version FULLDMD PUP Edition
1697 downloads
I want to share a VR Room Conversion of Blade Runner 2049 with you today. I converted this table for VR because it is a Beauty from "wpilot" and should not be missing in any VR collection. I hope someone has as much fun with it and like it as I do, so I'm going to share it with you guys now. I had to adjust a few little things, prettify and hide them, but the table works quite well now in VR. Edit 10/03/2024: New Version Blade Runner 2049 (2021) FULLDMD PUP Edition.zip Attention: If the Ball is too bright open in VPX->Preferences->Video/Graphics Options and activate under Ball Rendering "disable Lighting" then click on the left "Specific table overrides" and save. For all of you with VPMFlips Error open Script and look at Line 79 "Const UseSolenoids = 2" turn it to 1 and try again. Thanks to Panasony, one of our Community Members from "VR Pinball Group." (https://discord.gg/dKSP9eTPt7) we can present you a better looking Full DMD now. Hopefully this is the last update at least for now. You should definitely use the linked pup pack (and leave a like) so that the new FuLL DMD works properly. Then copy the pup files from my .zip file into your pup folder (make a backup). Sorry guys for the inconvenience but the Full DMD update is worth it, I didn't want to withhold it from you. '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR PuP/Backglass - Switch the VRBackglass with your right MagnaSafe !BEFORE! you start a Game! 'If you want to use the Pup-Pack hit 3 times the right MagnaSafe Button to switch to PuP Backglass! 'LUT Change - Switch the LuT Options with your left MagnSafe! 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** If you want to use the Pup Pack follow this Link! A big thanks to wpilot for creating such a beautyfull table and Rajo Joey for the LUT Template and more importantly the elimination of the annoying Flex DMD error and the possibility to change the backglass via Magnasave button and some other fixes. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite and Solters for beta testing . And not to forget JP Salas for making the Original 'Pokemon Pinball' Table. And a big THANKS to Apophis for his nice tutorials! Link to the original Blade Runner Table: https://www.vpforums.org/index.php?app=downloads&showfile=14820&st=50#commentsStart- 55 comments
- 5 reviews
-
- 53
-
-
- vpx blade runner 2049
- vr room
- (and 12 more)
-
Version 2.0.2
2523 downloads
Gottlieb's 1984 Alien Star! Journey to an Alien Star for a pinball battle in space! Multiball, skill shots, and plenty of fast action! So much fun to play! Thanks to Borgdog for providing original playfield and plastic scans, cabinet stencils, and physical measurements of his actual table. He also had lots of authentic Gottlieb primitives to use, and did a tremendous amount of testing! Thanks also to Redbone who took those scans of the playfield and plastics and did a tremendous amount of work to get them to look so good! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass. DarthVito did the VR wall environment. I updated to latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens and dozens of hours were spent studying gameplay videos (2 streams were recorded by Borgdog) to match the table skill shots and action. Thanks also to Rothbauerw for providing updated flipper physics code to help with the skillshots. That code was needed to be able to do some of the skillshots. This table is loaded with options. Various balls, ball brightness, flippers, tents, caps, plastic edge colors, LUTs, Dip settings, siderails, and plenty of other VR stuff. Redbone encouraged me to include special edge LED lighting in the plastics that iaakki originally did for another table. Looks really cool, and is included as an option. The ROM can be found at pinballnirvana.com... alienstr.zip). There's an option in the script to change the DIPS, however it will load a default set when you launch the table. NOTE: YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP CHANGES TO TAKE EFFECT. This is ONLY the first time you launch the table. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and only allows for points on 3 balls. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. These are the default DIPS that are and set at original table launch: 1=Coin Chute same 0=3rd coin chute no effect 0=Game mode of replay for hitting threshold 1=Number of balls =3 1=Playfield Special of extra ball (However in tourney mode this is zero) 0=Novelty of normal game mode (However in tourney mode this is zero) 1=Match feature 1=Background Sound Thanks again to Borgdog and Redbone for the playfield and plastic images, the stencils, the testing, and all the feedback! Also thanks to Hauntfreaks for the updated Backglass images, and to Rothbauerw for his flipper physics code. Also thanks to pinstratsdan, and everyone else from the VPW team that provided testing and feedback! -
View File Halloween 1978-1981 (Original 2022) 1.03 (VR ROOM) Want to share my second VR Room Conversion with you today. I converted this table for VR because it is a masterpiece from HiRezz00 & Apophis and should not be missing in any VR collection. I hope someone has as much fun with it as I do, so I'm going to share it with you guys now. VR Options to change in Skript: '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 You will need the B2S and Music from HiRezz00 Downloads : A big thanks to HiRezz00 for allowing me to take his masterpiece to the next dimension. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite for beta testing . And not to forget JP Salas for making the Original 'Medusa' Table. Submitter Ahr1man Submitted 11/29/22 Category VR - Virtual Reality Pinball Modified by Ahr1man -
Version 2.0.1
1437 downloads
Gottlieb's Super Orbit! Lots of fun to play, with a varitarget, orbits, and lots of bonus opportunities. Redbone spent considerable time to get the playfield and plastic images just right, as resources for this table were very limited. As usual lots of hours were put in on this one, and lots of tweaking on the varitarget and physics to emulate a real machine. I implemented the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, roth standup and varitarget targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Redbone provided the playfield and updated the plastics and apron, and other images. Hauntfreaks provided the higher resolution VR backglass and Silversurfer updated the cab artwork. I also added options for balls, ball brightness, LUTs, Dip settings, siderails, and plenty of other VR stuff. DarthVito provided a few additional wallpaper VR Room walls. You can find the ROM at pinballnirvana.com... sorbit.zip. Also, I've included the nvram file to initially set the Dips, as the ROM creates settings that should be adjusted. You can either grab the nvram file and put it in your nvram directory, or follow this process to do an initial setup for yourself. (When you open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options, and I recommend these shown below. Once entered, you can exit out, and in the script, you can set the SetDIPSwitches to zero. That will set the ROM settings and turn off the option. If you later want to change that, you can turn it back on and change the dips.) - 3 ball - Playfield special of "extra ball" - Game mode of "replay" - Novelty of "normal" - Check the Match, Credits Thanks again to Redbone for the playfield and plastic images, Rothbauerw for the varitarget code, Hauntfreaks for the updated VR Backglass, DarthVito for additional VR walls, and Silversurfer for the cab art images! Also thanks to everyone else from the VPW team that provided feedback!- 26 comments
- 7 reviews
-
- 154
-
-
Version 3.1
1025 downloads
This is a VR Conversion Mash-Up Table with Prims and Images from HauntFreaks and Marty02. Thanks guys for permission!!! Special Thanks to Rascal for the nice VR Backglass!!! VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -Pup Events -New Mash-Up (Prims and Images) Attention!!! For VR-PupPack Users read the ReadMe.txt but use the Link in this Description, the Link in my ReadMe doesnt work. Left Magna for Lut Change and Right Magna for Room Switch '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** Link I would recommend you to use this Altsound! Link I would recommend you to use this DMD Altcolor! Link to PupPack from Gman77: Link to original "Godzilla (Sega-Stern mash-up) v3.0" Table by HauntFreaks: Link to original "godzilla limited edition" Table by Marty02: A big thanks to Hauntfreaks, Marty02 and 32assassin for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd for his VR toys and his help, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Hauntfreaks, Solters and Studlygoorite for beta testing. And a big THANKS to Apophis for his nice tutorials! -
Version nFozzy
828 downloads
Today i want to share a new VR conversion of Iron Maiden-Virtual Time with you guys. This is a cooperation of Rascal, Solters and me. This awesome table should not be missing in any VR collection, I hope you have as much fun with it as I do. A special thanks goes to my friend Rascal, who is responsible for the included Backglass with segmented Display, flashing Speakers, some Playfield corrections. VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -FuLLDMD PupPack for VR Attention!!! For VR-PupPack Users read the ReadMe!!!.txt Left Magna for Lut Change and Right Magna for GI Switch '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** Link to original "Iron Maiden Virtual Time [IMVT]" Table and the needed Music Files if you play without PupPack!!!: You have to copy just the Songs to the "Music" Folder! Link to PupPack A big thanks to Mussinger & Herweh for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd and Steely for his VR toys and Basti for the nice VR Room, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Solters and Studlygoorite for beta testing. And a big THANKS to Apophis for his nice tutorials! -
Version nFozzy
968 downloads
I want to share a VR Room Conversion of Elvira's "Party House of Horror" with you today. This is a cooperation of Rascal, Rawd, Hauntfreaks and me. This table should not be missing in any VR collection, I hope you have as much fun with it as I do. A special thanks goes to my friend Rascal, who is responsible for the redesign of the segmented display and some Playfield corrections. He was able to build on the fantastic preparatory work of Walter Whitmer and sixtoe. VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -some little Tweaks Left Magna for Lut Change '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** Link to original Elvira's "Party House of Horror" Table: A big thanks to Hauntfreaks, Marty02 and 32assassin for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd for his VR toys and his help, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Hauntfreaks, Solters and Studlygoorite for beta testing. And a big THANKS to Apophis for his nice tutorials! -
Version 2.0.0
1353 downloads
Gottlieb's 1984 The Games! Simple but hard to master. The goal: collect five medals in one ball and it consists of five shots. Including captive balls, Vari-target, saucer, and a spinner. The shots are really fulfilling despite the simple guidelines. The captive ball, the spinner, and the vari target are examples of critical shots that pay off if you make them, but the ultimate payout an Olympic gold medal—comes from making them properly. Thanks to Redbone who helped with the playfield and plastics from pictures off the web! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass (and an updated b2s). DarthVito did the VR wall environment, and topper. Silversurfer provided vector images from photos off the web for the VR cab. Also, look for the alternate sound pack that Redbone and Darthvito have been working on. I built the table from scratch and included the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth standup targets, standalone compatibility, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens of hours were spent studying gameplay videos to match the table skill shots and action. I also used Rothbauerw's updated flipper physics code to help with the skillshots. NOTE: YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP SETTINGS TO TAKE EFFECT. This is ONLY the first time you launch the table. This table is loaded with options. Various balls, ball brightness, flippers, tents, caps, plastic edge colors, LUTs, Dip settings, siderails, and plenty of other VR stuff. Redbone once again encouraged me to include special edge LED lighting in the plastics that iaakki originally did for another table. Looks really cool, and is included as an option. Redbone also created an alternate Gsound option. Download it here: The ROM can be found at pinballnirvana.com... thegames.zip). There's an option in the script to change the DIPS, however it will load a default set when you launch the table. NOTE: AGAIN, YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP CHANGES TO TAKE EFFECT. This is ONLY the first time you launch the table. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and requires 3 medals to light special rather than 2. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. Once again thanks to Redbone, Hauntfreaks, Apophis, Darthvito, Silversurfer and the VPW team for testing, and everyone else that provided feedback! -
View File The Games (Gottlieb 1984) Gottlieb's 1984 The Games! Simple but hard to master. The goal: collect five medals in one ball and it consists of five shots. Including captive balls, Vari-target, saucer, and a spinner. The shots are really fulfilling despite the simple guidelines. The captive ball, the spinner, and the vari target are examples of critical shots that pay off if you make them, but the ultimate payout an Olympic gold medal—comes from making them properly. Thanks to Redbone who helped with the playfield and plastics from pictures off the web! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass (and an updated b2s). DarthVito did the VR wall environment, and topper. Silversurfer provided vector images from photos off the web for the VR cab. Also, look for the alternate sound pack that Redbone and Darthvito have been working on. I built the table from scratch and included the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth standup targets, standalone compatibility, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens of hours were spent studying gameplay videos to match the table skill shots and action. I also used Rothbauerw's updated flipper physics code to help with the skillshots. NOTE: YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP SETTINGS TO TAKE EFFECT. This is ONLY the first time you launch the table. This table is loaded with options. Various balls, ball brightness, flippers, tents, caps, plastic edge colors, LUTs, Dip settings, siderails, and plenty of other VR stuff. Redbone once again encouraged me to include special edge LED lighting in the plastics that iaakki originally did for another table. Looks really cool, and is included as an option. The ROM can be found at pinballnirvana.com... thegames.zip). There's an option in the script to change the DIPS, however it will load a default set when you launch the table. NOTE: AGAIN, YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP CHANGES TO TAKE EFFECT. This is ONLY the first time you launch the table. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and requires 3 medals to light special rather than 2. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. Once again thanks to Redbone, Hauntfreaks, Apophis, Darthvito, Silversurfer and the VPW team for testing, and everyone else that provided feedback! Submitter UnclePaulie Submitted 03/02/24 Category VPX - Pinball Tables
-
Version v10.7.2 required
440 downloads
Want to share my second VR Room Conversion with you today. I converted this table for VR because it is a masterpiece from HiRezz00 & Apophis and should not be missing in any VR collection. I hope someone has as much fun with it as I do, so I'm going to share it with you guys now. VR Options to change in Skript: '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 You will need the B2S and Music from HiRezz00 Downloads : A big thanks to HiRezz00 for allowing me to take his masterpiece to the next dimension. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite for beta testing . And not to forget JP Salas for making the Original 'Medusa' Table. -
View File Alien Star (Gottlieb 1984) Gottlieb's 1984 Alien Star! Journey to an Alien Star for a pinball battle in space! Multiball, skill shots, and plenty of fast action! So much fun to play! Thanks to Borgdog for providing original playfield and plastic scans, cabinet stencils, and physical measurements of his actual table. He also had lots of authentic Gottlieb primitives to use, and did a tremendous amount of testing! Thanks also to Redbone who took those scans of the playfield and plastics and did a tremendous amount of work to get them to look so good! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass. DarthVito did the VR wall environment. I updated to latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens and dozens of hours were spent studying gameplay videos (2 streams were recorded by Borgdog) to match the table skill shots and action. Thanks also to Rothbauerw for providing updated flipper physics code to help with the skillshots. That code was needed to be able to do some of the skillshots. This table is loaded with options. Various balls, ball brightness, flippers, tents, caps, plastic edge colors, LUTs, Dip settings, siderails, and plenty of other VR stuff. Redbone encouraged me to include special edge LED lighting in the plastics that iaakki originally did for another table. Looks really cool, and is included as an option. The ROM can be found at pinballnirvana.com... alienstr.zip). There's an option in the script to change the DIPS, however it will load a default set when you launch the table. NOTE: YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP CHANGES TO TAKE EFFECT. This is ONLY the first time you launch the table. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and only allows for points on 3 balls. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. These are the default DIPS that are and set at original table launch: 1=Coin Chute same 0=3rd coin chute no effect 0=Game mode of replay for hitting threshold 1=Number of balls =3 1=Playfield Special of extra ball (However in tourney mode this is zero) 0=Novelty of normal game mode (However in tourney mode this is zero) 1=Match feature 1=Background Sound Thanks again to Borgdog and Redbone for the playfield and plastic images, the stencils, the testing, and all the feedback! Also thanks to Hauntfreaks for the updated Backglass images, and to Rothbauerw for his flipper physics code. Also thanks to pinstratsdan, and everyone else from the VPW team that provided testing and feedback! Submitter UnclePaulie Submitted 01/27/24 Category VPX - Pinball Tables
-
View File Super Orbit (Gottlieb 1983) Gottlieb's Super Orbit! Lots of fun to play, with a varitarget, orbits, and lots of bonus opportunities. Redbone spent considerable time to get the playfield and plastic images just right, as resources for this table were very limited. As usual lots of hours were put in on this one, and lots of tweaking on the varitarget and physics to emulate a real machine. I implemented the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, roth standup and varitarget targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Redbone provided the playfield and updated the plastics and apron, and other images. Hauntfreaks provided the higher resolution VR backglass and Silversurfer updated the cab artwork. I also added options for balls, ball brightness, LUTs, Dip settings, siderails, and plenty of other VR stuff. DarthVito provided a few additional wallpaper VR Room walls. You can find the ROM at pinballnirvana.com... sorbit.zip. Also, I've included the nvram file to initially set the Dips, as the ROM creates settings that should be adjusted. You can either grab the nvram file and put it in your nvram directory, or follow this process to do an initial setup for yourself. (When you open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options, and I recommend these shown below. Once entered, you can exit out, and in the script, you can set the SetDIPSwitches to zero. That will set the ROM settings and turn off the option. If you later want to change that, you can turn it back on and change the dips.) - 3 ball - Playfield special of "extra ball" - Game mode of "replay" - Novelty of "normal" - Check the Match, Credits Thanks again to Redbone for the playfield and plastic images, Rothbauerw for the varitarget code, Hauntfreaks for the updated VR Backglass, DarthVito for additional VR walls, and Silversurfer for the cab art images! Also thanks to everyone else from the VPW team that provided feedback! Submitter UnclePaulie Submitted 01/14/24 Category VPX - Pinball Tables
-
Version 10.7.2
422 downloads
Here's another VR Conversion I want to share with you guys. This was created in collaboration with Rascal, who helped me a lot. If you don't know something yourself, Rascal knows it. 🤗 Why did I want to convert this particular table, simply because it's on my list and I really like it. I hope someone has as much fun with it and like it as I do, so I'm going to share it with you guys now. '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** You don't need B2S but i want to give Credits to HiRez00 because i used his Backglass and his realy good Quality Speaker/DMD Grill Texture. And without my friend Rascal, we would only have a standard grill. This is the Link to the BS2 and Grill i used: A big thanks to Joe Picasso for creating such a beautyfull table and give me Permission to convert it to VR. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and Rascal for helping me with the Mesh and everything else and of course Studlygoorite for beta testing . -
View File Godzilla (Sega-Stern mash-up 2021) v3.1 (VR Room) This is a VR Conversion Mash-Up Table with Prims and Images from HauntFreaks and Marty02. Thanks guys for permission!!! Special Thanks to Rascal for the nice VR Backglass!!! VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -Pup Events -New Mash-Up (Prims and Images) Attention!!! For VR-PupPack Users read the ReadMe.txt but use the Link in this Description, the Link in my ReadMe doesnt work. Left Magna for Lut Change and Right Magna for Room Switch '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** Link I would recommend you to use this Altsound! Link I would recommend you to use this DMD Altcolor! Link to PupPack from Gman77: Link to original "Godzilla (Sega-Stern mash-up) v3.0" Table by HauntFreaks: Link to original "godzilla limited edition" Table by Marty02: A big thanks to HauntFreaks, Marty02 & 32assassin for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd and Steely for his VR toys and Basti for the nice VR Room, Sixtoe for his great templates, Rajo Joey for the LUT & Room switch Template and of course Rascal, and Studlygoorite for beta testing. A big thanks to Hauntfreaks, Marty02 and 32assassin for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd for his VR toys and his help, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Hauntfreaks, Solters and Studlygoorite for beta testing. And a big THANKS to Apophis for his nice tutorials! Submitter Ahr1man Submitted 01/13/23 Category VR - Virtual Reality Pinball Modified by Rascal & Ahr1man
-
View File Iron Maiden Virtual Time (Original 2020)(VR Room) Today i want to share a new VR conversion of Iron Maiden-Virtual Time with you guys. This is a cooperation of Rascal, Solters and me. This awesome table should not be missing in any VR collection, I hope you have as much fun with it as I do. A special thanks goes to my friend Rascal, who is responsible for the included Backglass with segmented Display, flashing Speakers, some Playfield corrections. VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -FuLLDMD PupPack for VR Attention!!! For VR-PupPack Users read the ReadMe!!!.txt Left Magna for Lut Change and Right Magna for GI Switch '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** Link to original "Iron Maiden Virtual Time [IMVT]" Table and the needed Music Files if you play without PupPack!!!: You have to copy just the Songs to the "Music" Folder! Link to PupPack A big thanks to Mussinger & Herweh for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd and Steely for his VR toys and Basti for the nice VR Room, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Solters and Studlygoorite for beta testing. And a big THANKS to Apophis for his nice tutorials! Submitter Ahr1man Submitted 01/12/23 Category VR - Virtual Reality Pinball Modified by Rascal & Ahr1man
-
View File Blade Runner 2049 (2021)(VR ROOM ) I want to share a VR Room Conversion of Blade Runner 2049 with you today. I converted this table for VR because it is a Beauty from "wpilot" and should not be missing in any VR collection. I hope someone has as much fun with it and like it as I do, so I'm going to share it with you guys now. I had to adjust a few little things, prettify and hide them, but the table works quite well now in VR. Edit 10/03/2024: New Version Blade Runner 2049 (2021) FULLDMD PUP Edition.zip Attention: If the Ball is too bright open in VPX->Preferences->Video/Graphics Options and activate under Ball Rendering "disable Lighting" then click on the left "Specific table overrides" and save. For all of you with VPMFlips Error open Script and look at Line 79 "Const UseSolenoids = 2" turn it to 1 and try again. Thanks to Panasony, one of our Community Members from "VR Pinball Group." (https://discord.gg/dKSP9eTPt7) we can present you a better looking Full DMD now. Hopefully this is the last update at least for now. You should definitely use the linked pup pack (and leave a like) so that the new FuLL DMD works properly. Then copy the pup files from my .zip file into your pup folder (make a backup). Sorry guys for the inconvenience but the Full DMD update is worth it, I didn't want to withhold it from you. '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR PuP/Backglass - Switch the VRBackglass with your right MagnaSafe !BEFORE! you start a Game! 'If you want to use the Pup-Pack hit 3 times the right MagnaSafe Button to switch to PuP Backglass! 'LUT Change - Switch the LuT Options with your left MagnSafe! 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** If you want to use the Pup Pack follow this Link! A big thanks to wpilot for creating such a beautyfull table and Rajo Joey for the LUT Template and more importantly the elimination of the annoying Flex DMD error and the possibility to change the backglass via Magnasave button and some other fixes. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite and Solters for beta testing . And not to forget JP Salas for making the Original 'Pokemon Pinball' Table. Link to the original Blade Runner Table: https://www.vpforums.org/index.php?app=downloads&showfile=14820&st=50#commentsStart Submitter Ahr1man Submitted 12/07/22 Category VR - Virtual Reality Pinball Modified by Ahr1man/Panasony
-
View File Elvira House of Horror mash-up (original 2021)(VR ROOM ) I want to share a VR Room Conversion of Elvira's "Party House of Horror" with you today. This is a cooperation of Rascal, Rawd, Hauntfreaks and me. This table should not be missing in any VR collection, I hope you have as much fun with it as I do. A special thanks goes to my friend Rascal, who is responsible for the redesign of the segmented display and some Playfield corrections. He was able to build on the fantastic preparatory work of Walter Whitmer and sixtoe. VR user meeting point: https://discord.gg/8CRnkssmbh New in this Version: -nFozzy Physics -Fleep Sounds -some little Tweaks Left Magna for Lut Change '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** A big thanks to Hauntfreaks, Marty02 and 32assassin for creating such a beautyfull table and give me permission to convert it to VR. I also want to thank Rawd for his VR toys and his help, Sixtoe for his great templates, Rajo Joey for the LUT Template and of course Rascal, Hauntfreaks, Solters and Studlygoorite for beta testing . Link to original Elvira's "Party House of Horror" Table: Submitter Ahr1man Submitted 12/27/22 Category VR - Virtual Reality Pinball Modified by Ahr1man, Rascal, Rawd
-
View File BarbWire(Gottlieb1996)JoePicassoModv1.2(VR ROOM ) Here's another VR Conversion I want to share with you guys. This was created in collaboration with Rascal, who helped me a lot. If you don't know something yourself, Rascal knows it. 🤗 Why did I want to convert this particular table, simply because it's on my list and I really like it. I hope someone has as much fun with it and like it as I do, so I'm going to share it with you guys now. '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** You don't need B2S but i want to give Credits to HiRez00 because i used his Backglass and his realy good Quality Speaker/DMD Grill Texture. And without my friend Rascal, we would only have a standard grill. This is the Link to the BS2 and Grill i used: A big thanks to Joe Picasso for creating such a beautyfull table and give me Permission to convert it to VR. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and Rascal for helping me with the Mesh and everything else and of course Studlygoorite for beta testing . Submitter Ahr1man Submitted 12/11/22 Category VR - Virtual Reality Pinball Modified by Ahr1man, Rascal