Cabinet Plans

1. All
2. A
3. B
4. C
5. D
6. E
7. F
8. G
9. H
10. I
11. J
12. K
13. L
14. M
15. N
16. O
17. P
18. Q
19. R
20. S
21. T
22. U
23. V
24. W
25. X
26. Y
27. Z
28. #

6 files

1. 

   DIY Cabinet plan

   By R0d0LpH3

   Hello everyone! For DIY low-budget cabinet project, I wanted to share this with you.
   Here are three cabinet designs I created to help those on a tighter budget or those who are more handy.
   They're 18mm thick, so drilling, mounting, assembling, and routing are no problem.
   Take a look at the raw dimensions to see if your monitors will fit. I have a lot of 32-inch monitors and an old 40-inch TV with widescreen, and they fit without any disassembly.
   The smallest one 3/4 32-inch is wide enough to use a standard lockbar, while the two larger ones 1/1 40-inch are wide enough to use a widebody lockbar.
   The back panel is designed as a fixed panel but can be cut out for a door, and the backbox is designed to house rear speakers and be filled with the front monitor.
   DXF and PDF files with material flow rate for a 2000x600mm tablet (standard in France)
   FREE TO MODIFY WITHOUT PERMISSION !
   And of course, sorry for my english ^^
    
   Bonjour à tous 
   Dans la continuité de mon WIP low budget sur pincabpassion je viens vous partager cela.
   Voici trois versions de caisse que j'ai dessinées pour aider les moins fortuné.
   Epaisseur de 18mm donc aucun problème pour percer fixer assembler défoncer ...
   
   Je vous laisse regarder les dimensions brutes pour voir si vos écrans passent dedans, j'ai beaucoup de 32 et une vieille tv 40 avec large bandes et ça passe sans démontage. 
   Largeur du petit 3/4 32 pouces permettant d'utiliser une lockbar classique, largeur des deux grand 1/1 40pouces permettant l'utilisation d'une lockbar widebody.
   
   La partie arrière est dessiner fixe mais peut être découper pour une porte et la backbox est prévu pour recevoir des HP à l'arrière et la remplir avec l'écran devant.
   Fichiers DXF et PDF avec proposition de débit pour des tablettes de 2000x600mm. 
   Vous êtes libre de modifier les fichiers à votre guises sans autorisation.
   

   12 downloads

      (0 reviews)

   0 comments

   Submitted May 22

2. Williams Std Body Cabinet Plans

   By Mameman

   Williams standard body cabinet plans (22" wide).
   for those not use to working with the metric system, simply take the number and divide by 25.4 to get imperial.
   

   3803 downloads

      (6 reviews)

   0 comments

   Submitted January 24, 2013

3. 

   Foam Leg Protector Template

   By Mameman

   Can't recall where I got it from but its a useful template if you want to cut foam or rubber protectors to go under your pin legs. You could also scale these up to allow you to create your own plastic leg protectors similar to those you can purchase for $20 or more.
   

   581 downloads

      (1 review)

   0 comments

   Submitted January 24, 2013

4. Bally's 70's style Solid State Cabinet Plans

   By Mameman

   Plans taken from a Evil Knievel machine.
   

   1153 downloads

      (4 reviews)

   0 comments

   Submitted January 23, 2013

5. Williams Widebody Cabinet Plans

   By Mameman

   Williams widebody plans, taken from my original TZ.
   Has been the source for many builds to date.
   for those not use to working with the metric system, simply take the number and divide by 25.4 to get imperial.
   

   7763 downloads

   • widebody plans
      (11 reviews)

   0 comments

   Updated January 24, 2013

6. 

   Pinball 2000 Cabinet Plans

   By Mameman

   Pinball 2000 Cabinet Plans
   

   1102 downloads

      (1 review)

   0 comments

   Submitted December 15, 2012