nfozzy [New VPVR Alert]Robocop (Data East 1989)_drakkon(mod_1.2)(VR ROOM)

[Ahr1man]

View File

Robocop (Data East 1989)_drakkon(mod_1.2)(VR ROOM)

---

I want to share my first VR Room Conversion with you today. Unfortunately, there hasn't been a VR port yet, at least none that I could find, so I had to make it myself. There are many good versions out there, but Drakkon's version was the only one that worked for me. I hope someone else has fun with it, so I'm sharing it with you now.

 

12/03/2024

added Original Cabinet Decals in separate .zip File

Install Intructions in ReadMe.txt

 

VR Options to change in Skript:

 

'********************* VR OPTIONS **************************************************
'***********************************************************************************

'VR Logo - Set VRLogo = 0 to turn off VR Logo. 
VRLogo = 1

'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. 
VRPosterR = 1

'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. 
VRPosterL = 1

'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. 
Glass = 1

'VR Playfield glass Scratches - Set to 0 if you want to turn them off.
GlassScratch = 1

 

 

You will need this B2S:

Big shoutout to Wildman for his fabulous backglasses!

 

I would also like to thank Rawd for their VR Toys and kiwi for the support.

And a very warm greeting and a big thank you for Rajo Joey, who put me on the right path and supported me with advice and action. Also thanks to Studlygoorite for beta testing and of course drakkon for allowing me to take his artwork to the next dimension.

I almost forgot the good Sixtoe, thanks for your great templates!

 

---

• Submitter
  Ahr1man
• Submitted
  11/29/22
• Category
  VR - Virtual Reality Pinball
• Modified by
  Ahr1man

 

[MrZitus]

Coins drop but does not start, any suggestions?