Search the Community

I have reconfigured some of the Screen options to make them more stable. Example: If you use a two screen version, place your DMD between the Aztec coins and it vanishes or the animations don't work correctly I've added a zip file here with some of the options modified. If you're not having any issues then you don't need to replace your PuP-Pack Options folders with this Pup-Pack_Options.zip file If you are having minor issues then this files includes all twelve options and may be your solution. Simply unzip and copy the option folder(s) of your choice into potc_600as and let it write over existing files. You don't have to download the entire pup-pack again. (You have the pup-pack zip file, but are encouraged to backup up existing files before writing over them.) Please be sure to share any issues so they can be addressed as quickly as possible. I have not resolved the problem of some community members having an issue with animations on the Aztec coins not being transparent as so far I've been unable to duplicate it. I believe this issue sometimes happens on the two screen options. I will keep on it though even if it means completely redesigning those animations. PuP-Pack_Options.zip

Pirates of the Caribbean - Fullscreen 4K Pirates of the Carribean new 2023.mp4 loading video

Pirates Of the Caribbean (Stern 2006)

Pirates of the Caribbean (Stern 2006) Animated Topper Video Go Capt. Jack Sparrow Pirates of the Caribbean Topper.mp4

Animated Full DMD video for Pirates of the Caribbean. Go Capt. Jack Sparrow! 16:9 Video. Pirates of the Caribbean.mp4

Media Pack for Pirates of the Caribbean table.

Here is my first from scratch build all done myself (little script help from luvthatapex and JPSalas with the spinning disk animation). This is one of my favorite tables so I wanted to do a detailed recreation of the table. Some of the plastics are not factory recreations but the table itself is. I also added a couple extra (like the cannon blast). Their are two version of the table. The normal version requires a pretty strong PC to run it due to the image resolution. The low res version should work on most PC's. Their are A LOT of alpha flashers though so if you still can't run the table you may need to start commenting out some of the non-critical ones (I.E. the non back panel light bulb ones). You will need the SAM files for VP. These are available on this site in the download section. You will also need the ROM. It is on the stern website (Click here for ROM information) Their is a direct B2S backglass available already (thanks Wildman). and the media pack is here - http://vpuniverse.com/forums/files/file/2459-pirates-of-the-caribbean-stern-2006-85vett-fs-101/ If you wish to mod the table an release it please let me know. That is not an option so I selected "no" for the permission to mod. I've got over 200 hours in this table so I hope you all enjoy. Only semi bug I am aware of is the ball hangs up at the one way diverter on the right ramp sometimes. I've played with it a lot and haven't been able to get it better. The ball can be moved with a light nudge so it shouldn't be a show stopper. Change log 1.2 (10/15/2013): Fixed left and right sling registry Adjusted B2S setting to get rid of line 1203 error Adjusted the 3 green lights above ramp to not be cut off at the top Fixed ball hang up problem at bottom of right ramp Fixed ball hang up problem at top or right ramp Fixed ball hang up problem at bottom pop bumper (when ejected from liars dice) Corrected Parlay switch (was part of the problem with the 1203 error) Adjusted flipper physics to allow for easier center shots (faster, less power, oblique) also increased end angle by 5 degrees Reduced tilt power and sensitivity. Should allow for nudges without the quick tilt now Couple other adjustments that I just can’t recall at this time Change log 1.3 (10/27/2013) Added ball drop sounds Fixed "jack the monkey" scoop Flipper physics adjusted again Adjusted output angle of "liars Dice" kick-out Adjusted fix for pop bumper ball stuck situation Change log 1.4 (12/24/2013) Placed a wall at the plank to prevent ball from getting stuck behind bumper. Fixed flasher over "Jake the Monkey" sign Combined Zip file for one download for both hi and low res tables Thanks to everyone for the tips and suggestions. Keep them coming.

This is a patch to convert 85vett's 2006 Stern Pirates of the Caribbean to the hybrid view. A big thank you to 85vett for letting me convert his fine table. The file contains the .dif file used to patch the original table. Get the original table from the link posted on this page lower right. Use the VP Patcher System to create the modified HV version. The VP Patcher can be found here.

Desktop Patch for Pirates Of the Caribbean.vpt by 85Vett (coolball for the Desktop-Patch) Changes i´ve done - added new Backdrop - change the values to create a desktop version - adjusts the flashers I'm not really happy with the Flipper settings, maybe someone can help with better settings. Need a better placed wall (for this desktop version at the plank to prevent ball from getting stuck behind bumper. Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/ Download the original Table: "Pirates Of the Caribbean.vpt" /http://vpuniverse.com/forums/files/file/2458-pirates-of-the-caribbean-stern-2006-85vett-fs-12/ Use the Mod: "PotC_v1.4b_VP99_DT.dif" Have fun To Apply a patch: a. If you do not already have the table that the patch was created for; you will need to download that file. Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on. b. Make sure that you are on the "Apply Patch" tab located at the top of the window. c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for. d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table. e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt. f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe. If you have made any changes to the original table release then this patch will not work.