Content Provider lucky1 Posted June 22, 2023 Author Content Provider Posted June 22, 2023 5 hours ago, nagaidevil said: Can we get a fix for this please? I will have a look. For now, delete the .pal file in the trek_201 altcolor folder and set the 4 colors in the game options of pinmame to 100% R 0 , G 128, B 255 66% R 255, G 128, B 0 33% R 255, G 255, B 128 Off R 0, G 0, B 0 This will result in exactly the same colors like in the pal file without the sizing problem.
bushav Posted June 22, 2023 Posted June 22, 2023 (edited) Good morning, After showing my virtual cab no love for the last few months I decided to do some upgrading of the DMD software. I have installed DMDdevice.dll version 2.1.1.0 Pin2color.dll 1.1.0.0 Pin2color64dll 1.1.0.0 Running a virtual DMD with PinUp installed. I believe the above versions are the latest, at least based on the first post downlink. My issue is that VNI/PAL works, Serum works but PAC does not. Am I correct in reading within this thread that this is common with the latest upgrades and a Freezy version that enables PAC is in the works? As you can see from the log the DMDdevice.dll is not attempting to load the Pin2color plugin. The default colorization is loading (the four color pal). I know you guys get tired of the same old questions but I promise I have read the last dozen pages of this thread and seem to be getting confused as to where we stand on full integration. Am I correct in understanding that my results are where we stand and that Freezy is testing a dll with full integration? Thanks guys, Lane DmdDevice.log Edited June 22, 2023 by bushav
Content Provider lucky1 Posted June 22, 2023 Author Content Provider Posted June 22, 2023 @bushav Version of dmddevice.dll in my zip is 2.1.3 and not 2.1.1 @nagaidevil I updated the zip in the first post. Issue with 128x16 and simple palette should be fixed.
Cliffy Posted June 22, 2023 Posted June 22, 2023 32 minutes ago, bushav said: Good morning, After showing my virtual cab no love for the last few months I decided to do some upgrading of the DMD software. I have installed DMDdevice.dll version 2.1.1.0 Pin2color.dll 1.1.0.0 Pin2color64dll 1.1.0.0 Running a virtual DMD with PinUp installed. I believe the above versions are the latest, at least based on the first post downlink. My issue is that VNI/PAL works, Serum works but PAC does not. Am I correct in reading within this thread that this is common with the latest upgrades and a Freezy version that enables PAC is in the works? As you can see from the log the DMDdevice.dll is not attempting to load the Pin2color plugin. The default colorization is loading (the four color pal). I know you guys get tired of the same old questions but I promise I have read the last dozen pages of this thread and seem to be getting confused as to where we stand on full integration. Am I correct in understanding that my results are where we stand and that Freezy is testing a dll with full integration? Thanks guys, Lane DmdDevice.log 3.71 kB · 0 downloads Make sure to get the zip at the bottom of the first page post https://vpuniverse.com/applications/core/interface/file/attachment.php?id=23362&key=2b1669809604fc92a0a5996247bf33e4
bushav Posted June 22, 2023 Posted June 22, 2023 8 minutes ago, lucky1 said: @bushav Version of dmddevice.dll in my zip is 2.1.3 and not 2.1.1 @nagaidevil I updated the zip in the first post. Issue with 128x16 and simple palette should be fixed. Kuddos, You and @Cliffy solved my problem. I was snagging the wrong download. Dang it, wasted two hours of my time and five minutes of yours over a rookie mistake. The Walking Dead is working and looks amazing. Thanks guys.
nagaidevil Posted June 23, 2023 Posted June 23, 2023 14 hours ago, lucky1 said: @bushav Version of dmddevice.dll in my zip is 2.1.3 and not 2.1.1 @nagaidevil I updated the zip in the first post. Issue with 128x16 and simple palette should be fixed. Thank you kindly @lucky1!
drady Posted June 24, 2023 Posted June 24, 2023 just rebuilt a new pincab with baller - so its been a while - do i need to install this patch/system to get colorised roms now?
Sakurarozu Posted June 25, 2023 Posted June 25, 2023 should i wait for this to update so i can use freezy dmd pinball fx not fx3?
Content Provider lucky1 Posted June 26, 2023 Author Content Provider Posted June 26, 2023 Pinball FX should work fine with this version. FX3 has also been reported to work. Nothing new added to the latest freezy. Just a lot of code refactoring done by freezy.
marccy1138 Posted June 26, 2023 Posted June 26, 2023 I have seen this exact issue. If you remove the .pal file and just use orange color, its fine.
Content Provider lucky1 Posted June 26, 2023 Author Content Provider Posted June 26, 2023 13 minutes ago, marccy1138 said: I have seen this exact issue. If you remove the .pal file and just use orange color, its fine. On 6/22/2023 at 4:21 PM, lucky1 said: I updated the zip in the first post. Issue with 128x16 and simple palette should be fixed.
marccy1138 Posted June 27, 2023 Posted June 27, 2023 maybe someone can help. I downloaded luckys files and pasted the 64 bit in my vpinmame and all color patched roms, color files dont work. All that works now is serum. I tried restoring the backup of the files in vpinmame and nothing. Any ideas?
marccy1138 Posted June 27, 2023 Posted June 27, 2023 I was able to restore using my vpinmame backup. Not sure why the file update would do that?
Cliffy Posted June 27, 2023 Posted June 27, 2023 16 minutes ago, marccy1138 said: I was able to restore using my vpinmame backup. Not sure why the file update would do that? You probably overwrote your dmddevice.ini when you unzipped the new dll's. ALWAYS backup a copy of your dmddevice.ini and b2sttablesettings.xml. Your dmddevice.ini is where all the sizes and positions of each game you ever ran (if you right click and save position)
marccy1138 Posted June 27, 2023 Posted June 27, 2023 Ok, so I have been messing with the new lucky release files and here is what I am experiencing. I can put the pincolor, .dll, etc and no issue. It seems when I put the config file in there, it nukes most all color support. Am I supposed to overwrite every file (except dmddevice.ini)? I tried just using the .dll, etc. and everything worked but I could not get fx3 or fx to show color but I may be doing something wrong. For those I created a folder in altcolor under vpinmame with the file name (fx="Table_19 for example). I dont get any color though.
encryptedmind Posted June 27, 2023 Posted June 27, 2023 Sorry guys Im confused or missing something. I upgraded vpx to 64 bit and everything is working great except colour dmds. Im using pin2dmd with .pac files. Do these files not work anymore, do I need to change to serum or zedmd? Or is there a way to get them to work in the .pac format?
outhere Posted June 27, 2023 Posted June 27, 2023 6 minutes ago, encryptedmind said: Sorry guys Im confused or missing something. I upgraded vpx to 64 bit and everything is working great except colour dmds. Im using pin2dmd with .pac files. Do these files not work anymore, do I need to change to serum or zedmd? Or is there a way to get them to work in the .pac format? All the info you need - https://vpuniverse.com/forums/topic/3370-attack-from-mars-colorization/page/3/?tab=comments#comment-42753 SEE - >>>>>>>>>>>> For - cRZ, PAL / VNI, Pal/fsq and Pac Files <<<<<<<<<<<<<
encryptedmind Posted June 27, 2023 Posted June 27, 2023 4 minutes ago, outhere said: All the info you need - https://vpuniverse.com/forums/topic/3370-attack-from-mars-colorization/page/3/?tab=comments#comment-42753 SEE - >>>>>>>>>>>> For - cRZ, PAL / VNI, Pal/fsq and Pac Files <<<<<<<<<<<<< Thank you for the quick response much appreciated.
Ericg384 Posted June 28, 2023 Posted June 28, 2023 (edited) I updated to the latest version and lost my serum dmd s and I download this to https://aka.ms/vs/17/release/vc_redist.x64.exe. is there anything else I have to do ? Edited June 28, 2023 by Ericg384
Cliffy Posted June 28, 2023 Posted June 28, 2023 27 minutes ago, Ericg384 said: I updated to the latest version and lost my serum dmd s and I download this to https://aka.ms/vs/17/release/vc_redist.x64.exe. is there anything else I have to do ? did you remove or rename any serum dlls in the vpinmame folder? They are a plugin now so not needed separately
Ericg384 Posted June 28, 2023 Posted June 28, 2023 (edited) 24 minutes ago, Cliffy said: did you remove or rename any serum dlls in the vpinmame folder? They are a plugin now so not needed separately So I should delete the serum dills ? Edited June 28, 2023 by Ericg384
Cliffy Posted June 28, 2023 Posted June 28, 2023 13 minutes ago, Ericg384 said: So I should delete the serum dills ? yes
encryptedmind Posted July 1, 2023 Posted July 1, 2023 On 6/27/2023 at 12:33 PM, outhere said: All the info you need - https://vpuniverse.com/forums/topic/3370-attack-from-mars-colorization/page/3/?tab=comments#comment-42753 SEE - >>>>>>>>>>>> For - cRZ, PAL / VNI, Pal/fsq and Pac Files <<<<<<<<<<<<< I tried to follow what i thought was right with .pac files. and i cant get them to work. I got the vni and pal files to work. What did I forget to do?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now