fly Posted November 16, 2015 Posted November 16, 2015 @fly from the bottom of the stacktrace I'm suite sure youre using the wrong version of the editor. Please use urls from this thread and check the video. Thx Strve I downloaded the editor of your website
Content Provider lucky1 Posted November 16, 2015 Author Content Provider Posted November 16, 2015 Ah so glad to see UltraDMD support. Very cool. I was pretty sure that ALL software that is supported by pindmd2 will also work with PIN2DMD. The only thing that could happen is, that instead of the USB VID/PID the software checks for additional fields. But that is doesn´t seem to be the case. Great, now supports ultradmd. What are the steps to put roms in full color? There are different ways to achieve that. 1. The source files (gif etc) already have a 16 color palette you can use to upload and get the trigger for the startframe to activate it from the editor. 2. You record a session using USBpcap driver, colorize the scenes in the editor, and get the trigger for the startframe to activate the palette generated. 3. Maybe you can upload all needed palettes and activate the needed one from the script before you start the scene (to be tested). Maybe a little extension to Ultradmd to pass a custom command to PIN2DMD is needed. I don´t know if Ultradmd can open&close the USB connection during gameplay. Maybe someone could ask the author of ultradmd.
Content Provider steve45 Posted November 16, 2015 Content Provider Posted November 16, 2015 yes but you should use the link posted here in this thread, not the one officially described on the website. If it not works for you please wait for an official release. br Steve
Content Provider lucky1 Posted November 16, 2015 Author Content Provider Posted November 16, 2015 steve can u add to an animation beside color? looking forward from turning my hook from a 16 to a 32 size Currently the 16row panels are not supported for input, because we don´t have a machine to test and implement it. Same with 64x192 panels.
fly Posted November 16, 2015 Posted November 16, 2015 yes but you should use the link posted here in this thread, not the one officially described on the website. If it not works for you please wait for an official release. br Steve OK, thank you for your answers
Content Provider gtxjoe Posted November 16, 2015 Content Provider Posted November 16, 2015 For vPINmame palette, is it always using the default pallet(0) which is multple colors. How would I switch to one of the other palettes, like red or green or blue that I see defined in the source code? Is there an input pin that could be use to cycle/change the active palette?
Content Provider lucky1 Posted November 16, 2015 Author Content Provider Posted November 16, 2015 Use the config tool pin2dmd.exe
fly Posted November 16, 2015 Posted November 16, 2015 ehhh, in my editor still does not work I tried on two computers, for Windows 7 and 10, and still they pop up any errors,
Content Provider lucky1 Posted November 16, 2015 Author Content Provider Posted November 16, 2015 ehhh, in my editor still does not work I tried on two computers, for Windows 7 and 10, and still they pop up any errors, The Editor is under development. Please wait for the release
randr Posted November 17, 2015 Posted November 17, 2015 This will work to hold them together until a frame is available
Mameman Posted November 17, 2015 Posted November 17, 2015 looking sweet, got mine ordered tonight. thanks Randr for the help. i may need to take a few minutes and do something on the cnc to aid in mounting them up.
Content Provider CarnyPriest Posted November 17, 2015 Content Provider Posted November 17, 2015 This will work to hold them together until a frame is available You just sawed the frame in half? Sent from my iPad using Tapatalk
randr Posted November 17, 2015 Posted November 17, 2015 Think I will cut a frame to go around this like pcb of plasma to mount in pinball. Will post some pics when I get it cut/mounted later
Content Provider UncleSash Posted November 17, 2015 Content Provider Posted November 17, 2015 I did. Yes Please update to the latest Firmware! Helps to reduce flicker bits on the Display! Like your easy Panel mount ! [emoji106]
Content Provider UncleSash Posted November 17, 2015 Content Provider Posted November 17, 2015 SD Card use with a VPin Cab: You need one, when you want to save the actual color selection with a VPin cab. When you set your DMD to single color "red" and there is no SD-card in, you get the RGB color after next reset from the controller (reset = lose of 5V power or with the black reset button on board). Then you have to set the color again with the Pin2DMD.exe tool.
randr Posted November 17, 2015 Posted November 17, 2015 Made another panel to just bolt right in and replace plasma dmd. Will back paint Lexan black as led panels are smaller then my plasma by a bit
randr Posted November 17, 2015 Posted November 17, 2015 Here is a video installed in my digital pin. Bolted right in replaced plasma so will bolt right in to any of my real pins http://youtu.be/Jjv0y20O0ao
hauntfreaks Posted November 17, 2015 Posted November 17, 2015 Randr looks great man!! anyone planning on replacing a real dmd to this setup... I would for sure recommend randr's last post on how he mounted the panels... the frame i'm working on will be best used in a custom speaker panel with a custom sized viewing hole for the new size of these panels.....
Content Provider UncleSash Posted November 17, 2015 Content Provider Posted November 17, 2015 tonight I finished the last PCBs from the 1st round breakout PCBs 166 solder points for each PCB... a total from 3320 solder points! It was an honor for me, to manufacture the PCBs for this great community. some impressions for you a possible change for the future, 1 small switch to select the source and a screw terminal for the external 5V DC. best regards Sascha
Content Provider lucky1 Posted November 17, 2015 Author Content Provider Posted November 17, 2015 I´m glad that you´re satisfied with our product randr. Great work UncleSash ! I think some members here need a BeerMe button :-) @Randr Did you saw the frame by hand or what did you use ? Which real pinballs Do you have for testing ? Lucky1
Content Provider UncleSash Posted November 17, 2015 Content Provider Posted November 17, 2015 I´m glad that you´re satisfied with our product randr. Great work UncleSash ! I think some members here need a BeerMe button :-) Lucky1 Lucky1 is one of this special members!
randr Posted November 17, 2015 Posted November 17, 2015 I´m glad that you´re satisfied with our product randr. Great work UncleSash ! I think some members here need a BeerMe button :-) @Randr Did you saw the frame by hand or what did you use ? Which real pinballs Do you have for testing ? Lucky1 Ran right down middle with table saw.Real machines: A lot but no newer sterns http://youtu.be/KMqZ3Ga4wg0
Content Provider lucky1 Posted November 17, 2015 Author Content Provider Posted November 17, 2015 Damn, I need somebody to test the Stern implementation. Curious what you say about the WPC interface.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.