fly Posted November 10, 2015 Posted November 10, 2015 http://www.aliexpress.com/item/free-shipping-p2-5mm-indoor-SMD-led-module-32X32-pixels-1-32-scan-high-refresh-led/32500425797.html 160x160
Rappelbox Posted November 10, 2015 Posted November 10, 2015 http://www.aliexpress.com/item/free-shipping-p2-5mm-indoor-SMD-led-module-32X32-pixels-1-32-scan-high-refresh-led/32500425797.html 160x160 These are the WRONG ones!!!!
Rappelbox Posted November 10, 2015 Posted November 10, 2015 Seller says it is 1/32 scan! The picture showing the back is the wrong one... I don't like people selling things with wrong detail picture If you are "the one" who participated in my group buy, you don't have to worry
fly Posted November 10, 2015 Posted November 10, 2015 ... If you are "the one" who participated in my group buy, you don't have to worry I'm on your list but I ordered one set of UncleSash without display
Rappelbox Posted November 10, 2015 Posted November 10, 2015 The picture of the back on your link is correct for what we are searching, but it's not the item the seller is selling. I strongly recommend Angela Wang if you are buying just 1-2 pieces UncleSash had good experience with her and fast reply to questions.
fly Posted November 10, 2015 Posted November 10, 2015 I ordered one of Angela few days ago, but 1/16 http://www.aliexpress.com/item/P2-5-Indoor-full-color-LED-module-1-16-scan-SMD-2121-3in1-RGB-160-160mm/32475082626.html
Rappelbox Posted November 10, 2015 Posted November 10, 2015 And that should be the correct one. I now read that you said "seller says its 2 pieces". If this is really true then you can buy from him. Hopefully he is not lying to you just only to sell...
fly Posted November 10, 2015 Posted November 10, 2015 I ordered him two pieces I assured that the module consists of two parts
Content Provider lucky1 Posted November 10, 2015 Author Content Provider Posted November 10, 2015 Here is a video of PIN2DMD connected to a real WPC Twilight Zone pinball machine. Palette was quick & dirty black,red,blue,white.
Content Provider steve45 Posted November 10, 2015 Content Provider Posted November 10, 2015 This video shows the extended version of the goDMD Editor, which can be used to define custom colors for pin2dmd its not released yet, but the first RC will follow soon. /Steve
fly Posted November 10, 2015 Posted November 10, 2015 .... its not released yet, but the first RC will follow soon. /Steve I am looking forward to it
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 WOW looks awesome! Update for my PreOrder round #1: Everbody get allready the eMail that the PCB needs a small MOD to use the PinDMD Socket as input and output! It was a real bad timing, 24 hours after i placed my order, Lucky1 and Steve45 found out, that the MISO/MOSI Wires are not correct connected to the Header and the STm32 Board. I was not able to chancel the PCB production, so i decieded to use them. The most guys from the Order will never use the PinDMD, but for the reason, that anyone wants it, i release here the PDF with the change. Here a picture how it looks after the mod (only 3 wires and 3 cuts on the PCB) I´m really sorry for this mod... but i was out of my hands and i make this preorder to help everybody and not to make money. Please don´t be mad with me. IMHO this mod is not necessary since we changed pins on the software side. No need to change MISO and MOSI by jumper. Just leave it on PA5 / PA7 EDIT 11-11-2015: No longer needed! Lucky1 changed the Software allready and everything is OK! Just leave the Jumper in position from Pin1 to Pin2, like in this picture: best regards Sascha
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 One more Update: The first 4 PCB´s are going out on 11-11-2015 in the morning (shipping label is allready created and on the box) They be at the user an Firday 11-13-2015! I still wait on 2x25 Pin Header, as soon i get them, the rest of the Boards are going out. @ Mameman: Your Board is ready! As soon i receive your PayPal payment i will ship your Board!
randr Posted November 11, 2015 Posted November 11, 2015 WOW looks awesome! Update for my PreOrder round #1: Everbody get allready the eMail that the PCB needs a small MOD to use the PinDMD Socket as input and output! It was a real bad timing, 24 hours after i placed my order, Lucky1 and Steve45 found out, that the MISO/MOSI Wires are not correct connected to the Header and the STm32 Board. I was not able to chancel the PCB production, so i decieded to use them. The most guys from the Order will never use the PinDMD, but for the reason, that anyone wants it, i release here the PDF with the change. Here a picture how it looks after the mod (only 3 wires and 3 cuts on the PCB) The PDF for the MOD: (only 3 wires and 3 cuts on the PCB) PIN2DMD PCB MOD for REV 1.1.pdf I´m really sorry for this mod... but i was out of my hands and i make this preorder to help everybody and not to make money. Please don´t be mad with me. best regards Sascha If I understand this correctly... I am going to install one kit in a real pinball for a test and that is what this modification is needed for? Installing in real pinball machine? Or am I wrong?
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 That is correct.
Content Provider lucky1 Posted November 11, 2015 Author Content Provider Posted November 11, 2015 One more Update: The first 4 PCB´s are going out on 11-11-2015 in the morning (shipping label is allready created and on the box) They be at the user an Firday 11-13-2015! I still wait on 2x25 Pin Header, as soon i get them, the rest of the Boards are going out. @ Mameman: Your Board is ready! As soon i receive your PayPal payment i will ship your Board! IMHO this mod is not necessary since we changed pins on the software side. No need to change MISO and MOSI by jumper. Just leave it on PA5 / PA7
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 IMHO this mod is not necessary since we changed pins on the software side. No need to change MISO and MOSI by jumper. Just leave it on PA5 / PA7 I moded allready 2 boards, that might be no Problem or Lucky1? regards
Content Provider lucky1 Posted November 11, 2015 Author Content Provider Posted November 11, 2015 You have to make sure that PA7 and PA5 is connected to the 14 Pin header. This is working for Input modes (WPC/STERN etc) and output mode where a standard pinball dmd is attached to the interface. PA6 is not needed.
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 You have to make sure that PA7 and PA5 is connected to the 14 Pin header. This is working for Input modes (WPC/STERN etc) and output mode where a standard pinball dmd is attached to the interface. PA6 is not needed. OK. Sounds good for me. The MOD is not needed, but when the MOD is already added to the PCB is that also No Problem. INFO: leave the Jumper from Pin1 to Pin2. here is picture how it have to look: And everything is in the way how Lucky1 and Steve45 needs it
gStAv Posted November 11, 2015 Posted November 11, 2015 Sweet! how important is it to flash the newest FW from GitHub later on? Will it be annoncend here if it's new fetures added? Flashed the latetst PIN2DMD-master_11-10-2015
Content Provider UncleSash Posted November 11, 2015 Content Provider Posted November 11, 2015 Sweet! how important is it to flash the newest FW from GitHub later on? Will it be annoncend here if it's new fetures added? Flashed the latetst PIN2DMD-master_11-10-2015 i think is the newest at this moment And well, they work every day on these Project... So i think, when you are use it within a real Cab., it sound more important. But I´m sure that Lucky1 will annonce that here, when they make big changes in the FW
Content Provider lucky1 Posted November 11, 2015 Author Content Provider Posted November 11, 2015 Big changes ? Every day ! The changes can be seen here https://github.com/lucky01/PIN2DMD/commits/master PinMame support seems to be in a stable state unless steve comes up with something new I´m currently working on 3 different things. - WPC support (voluntaries needed for testing) - Stern support (voluntaries needed for testing) - support for Steves Editor (want to test myself when finished ) I will connect both usbs in my cab and install the ST-Link utility to upgrade. http://www.st.com/web/en/catalog/tools/PF258168 No need to install CooCox in the cab.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.