-
What's Next?
No files in this category yet.
Files From Subcategories
-
PIN2DMD EVO XL 192x64 UPDATED
By Rene368
These are the files for the PIN2DMD EVO XL board I updated.
In the file you can find the gerber, .sch, .brd, PCBWAY BOM and PDF's of the schematic and board.
This is an updated design of version 1.1 of the PIN2DMD EVO XL 192x64 board.
The Sega XL displays have different brands of display with their own length of ribbon cable.
If you're lucky V1.1 will fit. If you're not lucky V1.1 needs a new ribbon cable, which is quite annoying.
With this version you don't need a new cable because the ribbon cable connector is physicality moved to a closer location for the original ribbon cable to reach.
For more information see: https://vpuniverse.com/forums/topic/4122-pin2dmd-evo-dmd-multicolor-now-also-for-de-128x16-and-sega-192x64/page/7/#comment-60634
!!! NOTE: The design is not tested yet, so please go over them or wait until someone else has completed an order and confirmed.
If the design is tested I will update this download. You can also check the linked thread. !!!
7 downloads
0 comments
Submitted
-
PIN2DMD HD SHIELD
By Rene368
These are the files for the PIN2DMD HD shield I designed.
In the file you can find the gerber, .sch, .brd, partlist, photos of the different Micro SD readers, .dxf for laser cut panel and a photo how to orientate the shield to the panel.
This shield is designed to build a PIN2DMD HD 256x64 display.
You can source the parts yourself. This could be cheaper than its big through hole brother.
For the processor it uses a 144 pin H743 NUCLEO board.
For more information see: https://vpuniverse.com/forums/topic/5348-pin2dmd-evo-hd-upgrade-to-256x64-resolution/
!!! NOTE: The chinese LED panels can have the magnets/screw holes in another position than desired.
This is the annoying thing with these chinese LED panels. !!!
19 downloads
0 comments
Submitted
-
PIN2DMD NUCLEO HD BOARD
By Rene368
These are the files for the PIN2DMD Nucleo HD board I designed.
In the file you can find the gerber, .sch, .brd, partlist and photos of the different Micro SD readers.
This is a newly designed version of the SMT version of the PIN2DMD EVO HD 256x64 board, with the parts in the same spot as the SMT version when this was possible.
This version is fully through hole, so you can solder it yourself and also source parts yourself.
For the processor it uses a 144 pin H743 NUCLEO board.
For more information see: https://vpuniverse.com/forums/topic/5348-pin2dmd-evo-hd-upgrade-to-256x64-resolution/
The picture of the black PCB is the prototype V1.0.
!!! NOTE: The chinese LED panels can have the magnets/screw holes in another position than desired.
Becasue of this, the position of the magnets/screw holes should always be checked if they will not touch any electical components on the PCB.
If this is the case, you can simply put a piece of tape over this area. !!!
23 downloads
0 comments
Submitted
-
pin2dmd Pin2DMD installation - connect your Pin2DMD with your WiFi
By UncleSash
A short instructions, how you connect your Pin2DMD WiFi Module into your HOME Network.
234 downloads
0 comments
Submitted
-
dc-dc converter Pin2DMD installation - DC-DC Converter Shield
By UncleSash
simple HOW-TO connect the DC-DC Voltage converter
168 downloads
0 comments
Submitted
-
pin2dmd Pin2DMD with Signal Enhancer - General Schematic
By UncleSash
This is a General Schematic for the Pin2DMD with a STM32F407VGT6 Controller.
includs:
RGB DMD Output (HUB75) real Pinball DMD Input Signal Enancer for real DMD Input SD Card reader very Basic drawin but very usefull, to get all the Pins right.
For more (like the Original Eagle file or correction in the Drawing), feel free to contact me.
192 downloads
0 comments
Updated
-
pin2dmd Pin2DMD Shield Schematic and Layout
By UncleSash
That's are the Schematic and Layouts from my Shields.
rev 1.2 (schematic and PCB Layout) rev 1.3 (schematic and PCB Layout) rev 1.4 (schematic and PCB Layout) rev 2.0a US (schematic and PCB Layout) rev 2.0c US (schematic and PCB Layout)
because, I still believe in the OpenSource!
When anybody wants or need the Eagla File, just send me a PM or go on my Facebook page and send me there a PM.
I still have the OpenSource Code from the OLD Firmware version 1.37, also able to send it after a PM.. yeah it is Open Source and you don"t need a key!
I like to upload the Open Source Version here, when the Admin will allow that to me.
729 downloads
0 comments
Submitted
-
Pin2DMD installation - Troubleshoot and Device Modes
By UncleSash
Small Help for easy troubleshooting from Basic functions, like LEDs, DeviceMode, etc.
297 downloads
0 comments
Submitted
-
Pin2DMD Installation - micro SD Card test
By UncleSash
Test and Format your SD Card for use in the Pin2DMD Shield
145 downloads
0 comments
Submitted
-
Pin2DMD - Firmware Upload and Driver
By UncleSash
Pin2DMD Firmware Upload (for FW Update/Upgrade or 1st use)
Pin2DMD Driver Installation (Windows)
249 downloads
0 comments
Submitted
-
Pin2DMD installation - 1st Test and VPinMame
By UncleSash
1st run with the Firmware on STm32F4 with or without DotMatrixDisplay (DMD)
291 downloads
0 comments
Submitted
-
PPM images
By 32assassin
this is a batch conversion for my FS wheels to PPM
You might be asking:
what is a PPM file and how do I use it?
PPM is an image file that can be displayed in your PIN2DMD driven LED display
read all about it here
http://vpuniverse.com/forums/topic/2331-pin2dmd-pinball-logo-images-ppm-format-and-how-to-load-them/
given that I don't have a PIN2DMD set up yet, I don't know how good or how bad they look.
Feel free to replace the ones that look bad.
this pack only contains images for the HQ FS tables I have in my set up, if I missed any let me know. I have over 1.2K wheels
199 downloads
0 comments
Submitted