Walking Dead, The (Stern 2014) - flupper version - Forced Perspective for Cabinet

This POV is for 43" display in cabinet mode using VPX10.8. It is an alternate option to those offered by LoadedWeapon.

The objective of this POV is to maximise the depth perception of the playfield utilising the "window" POV mode. The result is that, when viewed from directly from above, the image may look distorted - as shown in the attached screen shot - but when viewed  from the front of the cabinet, the images regain their perspective (much like "STOP" painted on a road surface). Although specifically customised for this particular table, it should also be a close fit for the same table made by other creators.

Installation  procedure:

1. Make a backup copy of your  *.ini file for this table.

2. Paste the downloaded file into your "Tables" folder

3. Rename the downloaded file to be exactly the same as your table file and B2S file. The most reliable way to do this is to select all  files, right click with mouse, then select rename option on one of the files. All 3 files will then be renamed automatically

Troubleshooting:

a) If you start the table and it is not visible or not centred properly

      1. press f12.

      2. Make sure you are on "page 2/3" which is the POV setting screen. 

      3. Use the Magna button to highlight "Vertical Offset"

      4. Use your flipper keys to adjust this value which will move playfield up or down.

      5. If the playfield is "black colour" it means that it is "beyond" the location of your display screen. In such a case the "Vertical Offset" value is most likely a high negative value. In that case press the right Magna key. The value should reduce towards zero. As you get near to zero the playfield will become visible. Continue to adjust it until the apron is aligned with the bottom of your display screen.