[New VPX Alert]Darkest Dungeon Table & Pup

[Spectrum1]

I am having trouble starting this table. I am getting an error : 

 

Line: 19427
Type mismatch: 'CDbl'  

 

I am on windows 10 in desktop mode , vpx 10.8 (beta 5) 

I also updated pinup player to ver. 1.5

 Anyone know how to solve this? Looks like a great table too!

 

[ZeltarVerron]

Hello there. New member of community here. I just finished downloading and installing Visual pinball and all necessities required to play tables and I wanted this one to be of my firsts I'll play. I got everything running... but when I launched the table, there was no music. I did everything according to instructions and even gotten a new version of VPinMAME, but I don't know what can be a cause of that. Can I possibly ask for help, please?

[vortex73]

Is it possible to print scores on real dmd (I use pin2dmd) with this table? I don't find how to do that.

 

Thanks for this great table and for your help.

[careychr]

I am running the 2.3 version of this table with the compressed pup videos. The table works like a charm, but I am experiencing stutter only when I press the flipper buttons. Are there any other people having this issue? And if so, is there a way to tweak the script to offset this? 

 

As a relatively new member of this community, I cannot thank the creators of this table enough for their hard work and dedication. Thanks so much!

[Friffy1]

On 8/21/2024 at 12:22 AM, careychr said:

I am running the 2.3 version of this table with the compressed pup videos. The table works like a charm, but I am experiencing stutter only when I press the flipper buttons. Are there any other people having this issue? And if so, is there a way to tweak the script to offset this? 

 

As a relatively new member of this community, I cannot thank the creators of this table enough for their hard work and dedication. Thanks so much!

For me, this table stutters so badly it's totally unplayable.  Even reducing textures to 1024 and using the "slow CPU" setting.  Literally can't play the table.  Which is a shame because it's EPIC.

[pfunkfunfk]

On 12/23/2023 at 11:02 AM, Shamusyeah said:

I've got an issue where one of the bottom aprons is displaying on the top right of the playfield. Running popper 1.5, I used VPX8 beta 7 and beta 5, both results are the same. Two screen setup. I tried switching the pup config on the aprons to popback, didn't help. Any thoughts on how to get the apron off my playfield?

 

Interestingly on other tables with the video aprons, they tend to load in the same top right corner, but then they move to their correct location. On this table, they appear in the correct location and the top right corner.

 

I have this same issue. Did you ever figure it out?

[lolzilla]

Amazing table! 😍

 

I was having serious FPS drops and lag in my very humble PC but I deleted "apron_left.mp4" and "apron_right.mp4"  in the "PUPVideos\DarkestDungeon\Apron" folder and now my FPS are back to normal.

 

I guess my PC can't handle 3 1080p videos running at the same time. Still, every time another video from the "Apron" folder gets activated, the frames drop, but not as much. Could it be possible to replace all the "Apron" videos for static images to make the table lighter?

 

BTW, before deleting the apron_* files, I tried all the possible PUP packs and all of them had the same terrible framerates.

 

[TinklesTheGnome]

For VR, the pup packs aren't displaying.  I hear music, the guys voice, and the normal pinball sounds, but no pup pack is displaying.  Or at least it is not displaying where I assume it is supposed to be, on back glass.  I've run the script for VR and I am using the Updated VR file.  I downloaded everything from VPU.

 

Interestingly, the pup pack works for Desktop mode.

 

Can anyone help me with this?  Maybe see if it works for you in VR?

[Janfi]

Bonjour , table très sympa mais je n'arrive pas à mettre plus d'un joueur  ! y a une astuce ? merci.

[Georgc]

Great table,  but I cannot hear the table sound effects at all all i hear is the voice over and music. I have turned up all the sound effects in the table options and that makes it BARLEY able to be herd. I am playing on a desktop with 2 screens. Any one have an idea on how to fix this? Thanks

 

 

 

 

Edit: Ok, fixed it. For future internet people. Check your sound settings in the Windows volume mixer to make sure that you didn't lower the visual pinball application relative to your system volume. 

Edited June 21, 2025 by Georgc

[theguy333]

im having an issue  where when i start "the weald" the ball, the table lights and the entire field ALL flicker constantly through the whole mode (basically on/off flickering). is there a way to reduce the amount? it makes it almost painful to look at

Edited July 30, 2025 by theguy333
attaching video file

[kainposai]

Compile error
-------------
Line: 180
ÎļþδÕÒµ½

Runtime error
-------------
Line: 847
±äÁ¿Î´¶¨Òå: 'LoadEM'

Runtime error
-------------
Line: 695
ȱÉÙ¶ÔÏó: 'Scorbit'

Runtime error
-------------
Line: 17257
ÀàÐͲ»Æ¥Åä: 'objrtx1'

Runtime error
-------------
Line: 1599
±äÁ¿Î´¶¨Òå: 'B2SOn'
 

 

 

 

cant paly LOl

[BrentOhhhh]

Hi! Newish user here. I'm really enjoying this table but I can't seem to get any high scores to show. I have tried the reset in the instructions and still nothing. Do I have to use scorbit or is there a way to display high scores just from at home play. Sorry if this is a dumb question I'm still figuring out all this virtual pinball stuff. Thanks in advance.

[rkader]

No so much for support but to say that after all this time, I found a little oversight. The right flipper button,, when pressed, shows inside the table (near the plunger).

 

Like the Daft Punk song, "human after all"  

[Sandro]

Wondering if someone can shed some light on my issue. It looks like the apron videos are also displaying onto the playfield. Any ideas? It's setup using the 2screen bat file. Much appreciated. 

Edited December 11, 2025 by Sandro

[duklovich]

I wanted to confirm the latest status on this table. Can it really not work work VPX 10.8 beta 7? I tried starting the table but it fails with an error relating to LoadEM.

[darkslide]

On 7/25/2025 at 11:38 PM, theguy333 said:

im having an issue  where when i start "the weald" the ball, the table lights and the entire field ALL flicker constantly through the whole mode (basically on/off flickering). is there a way to reduce the amount? it makes it almost painful to look at

Sale issue for me

[darkslide]

On 12/30/2025 at 12:49 PM, darkslide said:

Same issue for me in FS mode. no flashing in windowed mode but bad performance for my PC.

 

[clongnavy92]

Happy New Year to All!  I saw this update and was excited to check it out.  I am currently using Pinup Popper 1.5 installed with the standard baller installer.  When I try the updated table, I receive the alert that the table requires PUP Player Version 1.5 or greater (which I am on).  I see the note that requires Pinup Beta 160 or later along with the link to the two associated .exe files, but I cannot find any documentation associated with the Pinup Beta files and am concerned about impact of just dropping them in and replacing the current .exe files (PinUpDisplayX and PinUpPlayer).  Does anyone have any guidance or recommendations? Is it best to wait for the officially released PinUp files?  Thanks (big fan of the original Darkest Dungeon table)!

[Duracuir62]

Had the script error during multiball : 

 

Line 29598

Espace pile insuffisant:   'Debug3'

Edited January 2 by Duracuir62

[nilboggrim]

Have a warning message about running the right bat file for my setup over the whole playfield. I've ran as administrator multiple times and even tried other ones. Nothing seems to change. Original table is my #1 table and I love it. Really wish I could get this to run. Any suggestions would be awesome.

 

Edited January 2 by nilboggrim
Added a picture

[sic]

Thanks for a great table! 🙂

Too bad it crashed while fighting the Hag. I got a “Runtime error – Line: 30041, Stack error Debug 3”.

Using version 3.01.

[pmanic]

On 1/1/2026 at 1:09 PM, clongnavy92 said:

Happy New Year to All!  I saw this update and was excited to check it out.  I am currently using Pinup Popper 1.5 installed with the standard baller installer.  When I try the updated table, I receive the alert that the table requires PUP Player Version 1.5 or greater (which I am on).  I see the note that requires Pinup Beta 160 or later along with the link to the two associated .exe files, but I cannot find any documentation associated with the Pinup Beta files and am concerned about impact of just dropping them in and replacing the current .exe files (PinUpDisplayX and PinUpPlayer).  Does anyone have any guidance or recommendations? Is it best to wait for the officially released PinUp files?  Thanks (big fan of the original Darkest Dungeon table)!

This table looks amazing.  That said I have the same concern/question about the pinup 1.6 Beta.  I couldn't find anything on Nailbuster's site about 1.6.  
I have everything working on Pinup 1.5.  Not sure I want to risk that for one table. Would love to hear from the experts on the 1.6 Beta; like how to install it, how easy is it to reverse, how does it perform with other tables.

[rkader]

After updating 3.0.2 the table seems slower and definitely getting 10-40fps less.
It now dips to the 200FPS while previously I had to cap it to 240FPS (to match my monitor's refresh rate).

It feels and plays slower though I don't have any stutter (never had).

I use options "no sync" and "max framerate" set to 240.
G-sync monitor on an i5-10600k and rtx3080.

/edit. OK I think it is something to do with the some nvidia settings though it is weird that if I set "max framerate" to 0 it works fine at 240... if I cap it to 240, it's around 220 and dips to 200!

Edited January 3 by rkader

[CaptainPower]

On 1/2/2026 at 5:37 AM, sic said:

Thanks for a great table! 🙂

Too bad it crashed while fighting the Hag. I got a “Runtime error – Line: 30041, Stack error Debug 3”.

Using version 3.01.

I had the same issue, great game if it doesn't crash on me during multiballs.