[New B2S Alert] Avatar(Stern 2010)

[Wildman]

View File

Avatar(Stern 2010)

---

Avatar(Stern 2010)

---

• Submitter
  Wildman
• Submitted
  09/28/2013
• Category
  B2S Backglasses

 

[bill55]

Thanks much Wildman!

 

Any chance of using the higher res backglass that the FP version of this table uses? Great work though!

 

Bill

[Wildman]

show it to me i havent seen it.

[Dazz]

Here is the one from SLAM's FP table. I think this is the one he's asking about. It's a nice image, but it's not the real Avatar BG.

 

[Wildman]

While it looks cool, I dont do mods of BG's...I only like doing real,original,working BG's...Anything else is just a waste of time to me cause to much work goes into each one..

[poolshark021]

I think I am doing something wrong with this.  My backglass doesn't have any lights/animation.  Its just a static picture that is shown in the hyperpin selection screen when I play.  I have B2S.Server set in the script, and the DMD works fine.  Am I missing something?

[B2K24]

I think I am doing something wrong with this.  My backglass doesn't have any lights/animation.  Its just a static picture that is shown in the hyperpin selection screen when I play.  I have B2S.Server set in the script, and the DMD works fine.  Am I missing something?

 

Do you have Avatar(Stern 2010).directb2s in the same location as your Avatar.vpt file?

 

Can you right click in the backglass which will show you a B2S server settings screen and make sure everything is set there properly.

The default options all worked fine for me, but don't know enough yet if I can make some changes to get better improvements.

 

Do you have a B2STableSettings.XML in same location as your table and  .directb2s file?

 

this is what mine shows for Avatar

 

<avr_110>
    <HideGrill>2</HideGrill>
    <HideB2SDMD>0</HideB2SDMD>
    <HideDMD>2</HideDMD>
    <LampsSkipFrames>1</LampsSkipFrames>
    <SolenoidsSkipFrames>3</SolenoidsSkipFrames>
    <GIStringsSkipFrames>3</GIStringsSkipFrames>
    <LEDsSkipFrames>0</LEDsSkipFrames>
    <UsedLEDType>0</UsedLEDType>
    <IsGlowBulbOn>0</IsGlowBulbOn>
    <GlowIndex>-1</GlowIndex>
    <StartAsEXE>0</StartAsEXE>
    <Animations />
  </avr_110>

[poolshark021]

I do have the Avatar(Stern 2010).directb2s file in my tables folder, I can right click and get a settings menu. 

Here is my B2STableSettings.XML:

  <avr_110>
    <HideGrill>1</HideGrill>
    <HideB2SDMD>0</HideB2SDMD>
    <HideDMD>2</HideDMD>
    <LampsSkipFrames>1</LampsSkipFrames>
    <SolenoidsSkipFrames>3</SolenoidsSkipFrames>
    <GIStringsSkipFrames>3</GIStringsSkipFrames>
    <LEDsSkipFrames>0</LEDsSkipFrames>
    <UsedLEDType>0</UsedLEDType>
    <IsGlowBulbOn>0</IsGlowBulbOn>
    <GlowIndex>-1</GlowIndex>
    <StartAsEXE>1</StartAsEXE>
    <Animations />
  </avr_110>

I have plenty of other B2S tables working fine, this one just doesn't seem to do anything.

 

 

I also temporarily deleted the backglass image out of my hyperpin folder to see what was happening behind it.  When I load a table the backglass stays black unless I hit the esc key.  Then it loads the correct image, but still no lights or animation.

If I load the table in visual pinball directly I get a black backglass and the esc key doesn't work anymore.  If I right click on the black screen I get the standard windows right click menu, then the backglass image loads after that but still no animation.  Then I have to ctrl-alt-del to close visual pinball because the esc key won't do anything.

 

Not sure what that means but maybe someone has ran into this before?

[freneticamnesic]

I do have the Avatar(Stern 2010).directb2s file in my tables folder, I can right click and get a settings menu. 

Here is my B2STableSettings.XML:

  <avr_110>
    <HideGrill>1</HideGrill>
    <HideB2SDMD>0</HideB2SDMD>
    <HideDMD>2</HideDMD>
    <LampsSkipFrames>1</LampsSkipFrames>
    <SolenoidsSkipFrames>3</SolenoidsSkipFrames>
    <GIStringsSkipFrames>3</GIStringsSkipFrames>
    <LEDsSkipFrames>0</LEDsSkipFrames>
    <UsedLEDType>0</UsedLEDType>
    <IsGlowBulbOn>0</IsGlowBulbOn>
    <GlowIndex>-1</GlowIndex>
    <StartAsEXE>1</StartAsEXE>
    <Animations />
  </avr_110>

I have plenty of other B2S tables working fine, this one just doesn't seem to do anything.

 

 

I also temporarily deleted the backglass image out of my hyperpin folder to see what was happening behind it.  When I load a table the backglass stays black unless I hit the esc key.  Then it loads the correct image, but still no lights or animation.

If I load the table in visual pinball directly I get a black backglass and the esc key doesn't work anymore.  If I right click on the black screen I get the standard windows right click menu, then the backglass image loads after that but still no animation.  Then I have to ctrl-alt-del to close visual pinball because the esc key won't do anything.

 

Not sure what that means but maybe someone has ran into this before?

 

Are you using Windows 8? I have it working flne on my Windows 7 machine but Windows 8 seems to be giving me grief.

 

EDIT: I take it back, it just started working when I went to close the table down after starting it. Not sure what happened.

[poolshark021]

Are you using Windows 8? I have it working flne on my Windows 7 machine but Windows 8 seems to be giving me grief.

 

EDIT: I take it back, it just started working when I went to close the table down after starting it. Not sure what happened.

 

I am using xp x64

[Wildman]

made to original. cleaned up pic a bit .  no more blinky blinky