Content Provider steve45 Posted November 1, 2015 Content Provider Share Posted November 1, 2015 I've also had big problems to get usb drivers running with win7 x64 and even the one, that is working now crashes the system when going down to suspend. I've this howto here http://jaxov.com/2010/08/install-libusb-windows-7-vista-64-bit/it was the only one that was working, but only if you boot with option ignore driver signing and with the suspend issue. definitly not the final version to use. Every other try was not working at all, either no communications or simply no driver installed?!? But windows is anyway not "my operating system" and I'm working mostly on connecting real pinball machines. br Steve Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted November 1, 2015 Author Content Provider Share Posted November 1, 2015 The choice of the OS for virtual pinball is essential when you build a cab. 80% still use XP for it. Pin2dmd uses the same drivers as pindmd. There is nothing new on that side. A lot of troubleshooting has already been done in the past. I´m pretty sure the solution for this problem is already been published. So please invest a little time in searching, so I can invest my time in developing. Thanks Lucky1 Link to comment Share on other sites More sharing options...
Content Provider CarnyPriest Posted November 1, 2015 Content Provider Share Posted November 1, 2015 I haven't tried it myself, but there is this: http://www.gameex.info/forums/topic/16819-resolved-windows-10-pindmd2-failures/#entry148167 Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 PCB Boards are produced, just have to wait for shipping. See attachement for Details! Looks good, some small issues in the Silkscreen, but it was my fault and not needed for the function. It´s allready fixed in my layout and comes on the PCB in rev 1.2... (next order). Link to comment Share on other sites More sharing options...
Blashyrk Posted November 2, 2015 Share Posted November 2, 2015 I have uninstalled all drivers, and when i plug the stm32 board back in windows detects 2 devices (two PIN2DMD) is this right? Link to comment Share on other sites More sharing options...
gStAv Posted November 2, 2015 Share Posted November 2, 2015 What's changed in Rev 1.2 compared to the ones in the pre-order? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 I have uninstalled all drivers, and when i plug the stm32 board back in windows detects 2 devices (two PIN2DMD) is this right? No. Thats wrong. But well, now we are good to fix it. I have my laptop up in 45 minutes. Then i can support you with remote desktop. When you want to. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 What's changed in Rev 1.2 compared to the ones in the pre-order? Right now: - The silkscreen (the white color on the board) - a small change for using the PIN-DMD as input. A result from lucky1 and steves Test with a real pin. But there is no technical difference in the boards. So you can use all functions. Don't worry. And 4USD , it's still a super cheap price for the pcb. And i don't order some new ones, before i get more preorders. Regards Sascha Link to comment Share on other sites More sharing options...
Blashyrk Posted November 2, 2015 Share Posted November 2, 2015 No. Thats wrong. But well, now we are good to fix it. I have my laptop up in 45 minutes. Then i can support you with remote desktop. When you want to. I'm ready Link to comment Share on other sites More sharing options...
hauntfreaks Posted November 2, 2015 Share Posted November 2, 2015 can someone point me to the post where all the parts and paypal info is.... thanks Link to comment Share on other sites More sharing options...
Rappelbox Posted November 2, 2015 Share Posted November 2, 2015 As you live in the U.S., contact UncleSash Europeans contact me Sent from my Buschbongo using Patschehändes Link to comment Share on other sites More sharing options...
Content Provider freneticamnesic Posted November 2, 2015 Content Provider Share Posted November 2, 2015 Just say you want one and he'll contact you when they're ready I believe (he mentioned on page 10) Link to comment Share on other sites More sharing options...
fly Posted November 2, 2015 Share Posted November 2, 2015 Hifor me please1x PCB, 1 Header set,1x soldering service , 1 EU shipping Thank youPeter Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 Hi for me please 1x PCB, 1 Header set,1x soldering service , 1 EU shipping Thank you Peter Hallo Peter. habe dich mit auf die liste gesetzt. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 small update: I ordered 20 pcs 2 Layer PCBs for arround 80 USD in Shenzhen, China. Size 3x3.5 inch = 75x89 mm Hopefully they be here in week 47. So I can ship the boards in week 48. (last week in November) Lucky1´s 1 Layer is to expensive because of the size. Size: 3.35x4.85 inch = 84.5x123 mm 20 pcs would be for arround 90 USD. After delivery and test, 18 pieces are then available for sale. Update: 11-02-2015 PCB Boards are produced, just have to wait for shipping. See attachement for Details! Looks good, some small issues in the Silkscreen, but it was my fault and not needed for the function. It´s allready fixed in my layout and comes on the PCB in rev 1.2... (next order). S&H Calc from USPS from ZIP Code: 35404 and select the "Priority Mail Options: Priority Mail 1/2/3-Day Small Flat Rate Box" Please round the price UP for my Service! http://postcalc.usps.com/ The costs are: PCB: 1x PCB ($ 4.00) 1x shipping (Priority Mail 2-Day Small Flat Rate Box, Tuscaloosa, AL to Chicago, IL: $ 5.95 = 6.00) Total = $ 4.00 + $ 6.00 (S&H) And when anybody needs some Headers or Headers and Soldering Service: just add the Service cost below to the total from PCB + S&H Header Set: 1x 6 Pin Header (90° or straight) for ISP SD Card 1x 14 Pin (original DMD) 2x 16 Pin (Hub08 / Hub75) 1x 10 Pin Breakaway Header 2x Jumper Shunt 2x 50 Pin (STm32) Total = $ 3.00 Soldered on PCB and tested with RGB-DMD: 1x Header Set 1x Soldering 1x Test Total = $ 10.00 Example A: 1x PCB Board Only 1x shipping to Chicago Total = $10.00 Example B: 1x PCB Board 1x Header Set 1x shipping to Chicago Total = $ 13.00 Example C: 1x PCB Board 1x Header Set 1x Soldering 1x Test 1x shipping to Chicago Total = $ 20.00 I write a new comment when everything is ready. No rush at the moment. Small Update: They are going fast today... so hurry up! On my preorder list is: (status from 11-01-2015) Mameman with 1x PCB Board, 1 US Shipping CarnyPriest with 1x PCB Board, 1Header set, 1x soldering service + 1 SPI SD Card module, 1 US Shipping Randr with 3x PCB Board, 3Header set, 3x soldering service + 1 SPI SD Card module, 1 US Shipping boiydiego with 2x PCB, 2x Header set, 2x solderig service, 1 EU shipping gStAv with 6x PCB, 6Header set, 6x soldering service + 6 SPI SD Card module, 1x EU shipping gtxjoe with 1x PCB, 1x Header set, 1x soldering service, 1 US Shipping dub with 1x PCB, 1 Header set, 1 SPI SD Card module, 1 EU shipping scrappy555 1x PCB Board, 1Header set, 1x soldering service + 1 SPI SD Card module, 1 US Shipping Stefan with 1x PCB, 1x Header set, 1x solderig service, + 1 SPI SD Card module, 1 EU shipping aviable: (11-2-2015 4:48 PM) 1 pcs PCB 4 pcs SPI SD Card Modules (i ordered some more today) When anybody feels wrong with the preorder list, just let me know in a private message! Edit: At this time I´m not able to provide the STm32F4 Board preload Service. for some reason: Payment: How: only with PayPal When: when the PCBs are here and tested (hopefully week 47!) But i send every Person a personal message with a payment request. can someone point me to the post where all the parts and paypal info is.... thanks Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 Hi for me please 1x PCB, 1 Header set,1x soldering service , 1 EU shipping Thank you Peter You are on the list! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 2, 2015 Content Provider Share Posted November 2, 2015 ALL PCB´s from the 1st order are gone! I will order 10 new ones... in a couple days (rev 1.2) So post here when you want that i order some more! best regards Sascha Link to comment Share on other sites More sharing options...
fastdraw Posted November 3, 2015 Share Posted November 3, 2015 @rappelbox hi I am interested by 1 pin2dmd complete , I am French what is the cost? And modality ? thx Link to comment Share on other sites More sharing options...
Blashyrk Posted November 3, 2015 Share Posted November 3, 2015 My DMD finally works UncleSash got to the root of the problems (libusb) and made a guide on how to fix it, so thank you so much UncleSash for your awesome help and determination... Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 3, 2015 Content Provider Share Posted November 3, 2015 Finally we get it fixed! The Problem with 2 visible Pin2DMD devices in the Device Manager! It comes from the libusb driver and not from the Hardware! And well, you can get this problem also with the PinDMD2 device ( i have one and i had the same problem with both PinDMD´s)!!!!! You can find the Solutions in my Dropboxfolder. https://www.dropbox.com/sh/isc7p46q7ixz2np/AABc4Ax784xemgwRV5gc_FLwa?dl=0 With instructions in english! When you use my solutions, please give me a Feedback how it works with your PC! Thx. So have fun with the GREAT (and cheap!) Pin2DMD from Lucky1 and Steve! Best regards I'm having problems installing the Stm32 Virtual Com port driver, can't seem to find any drivers for it regarding the 16 pin connector, Does the red wire indicate port 1? Win 7 64 bit , and no i haven't found any drivers that work Did you activate the pindmd in your pinmame options (F1) ? He has no Communicatio at all.... The Drivers shows up correct in the Device Manager. But nothing happens when he start a rom or try to change the Color with your PIN2DMD tool. any ideas? He has TeamViewer installed. So he is able for remote service... I tryed it, but without any result. Hope that you have any idea. I've also had big problems to get usb drivers running with win7 x64 and even the one, that is working now crashes the system when going down to suspend. I've this howto here http://jaxov.com/2010/08/install-libusb-windows-7-vista-64-bit/it was the only one that was working, but only if you boot with option ignore driver signing and with the suspend issue. definitly not the final version to use. Every other try was not working at all, either no communications or simply no driver installed?!? But windows is anyway not "my operating system" and I'm working mostly on connecting real pinball machines. br Steve The choice of the OS for virtual pinball is essential when you build a cab.80% still use XP for it. Pin2dmd uses the same drivers as pindmd. Thereis nothing new on that side. A lot of troubleshooting has already beendone in the past. I´m pretty sure the solution for this problemis already been published. So please invest a little time in searching,so I can invest my time in developing.ThanksLucky1 I have uninstalled all drivers, and when i plug the stm32 board back in windows detects 2 devices (two PIN2DMD) is this right? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 3, 2015 Content Provider Share Posted November 3, 2015 Some great news for Pin2DMD Fans! All PCB´s from the first Order are gone The PCB´s started today the way with UPS to my House in Alabama: estimated arrival Nov. 9th (Monday next week), so i can start to ship them next week! There is also a NEW preorder list with another 20 pcs. Price is the same as before, just post here or message me that you want one or more. 4 are allready gone! and this time i can provide the STm32 discovery Board (HARDWARE only) for 27 USD PreOrder Thread: http://vpuniverse.com/forums/topic/2250-pin2dmd-prorder-backorder/ Don´t worry at all, i will order every month 10 pcs. or more... until everybody is happy and has his very own Pin2DMD Controller at home. best regards Sascha Link to comment Share on other sites More sharing options...
17Al3x17 Posted November 3, 2015 Share Posted November 3, 2015 Hi, It's possible to have pictures of the wiring ? Because I not sure. The wiring image ( pdf ) is not easy for me . Thanks a lot Alex Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 3, 2015 Content Provider Share Posted November 3, 2015 Hi, It's possible to have pictures of the wiring ? Because I not sure. The wiring image ( pdf ) is not easy for me . Thanks a lot Alex is in my gallery. http://vpuniverse.com/forums/gallery/member/9192-unclesash/ hope that will help you Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 3, 2015 Content Provider Share Posted November 3, 2015 I START A NEW THREAD FOR PREORDER! USE ONLY the NEW thread any orders!!!! here is the link: http://vpuniverse.com/forums/topic/2250-pin2dmd-prorder-backorder/ Place your Preorder ONLY there please. (Or the one from Rappelbox for Europe, link comes in the next days... hopefully) Pre Order List #2 here is a Picture from Preorder #1 Looks good, some small issues in the Silkscreen, but it was my fault and not needed for the function. It´s allready fixed in my layout and comes on the PCB in rev 1.2. On round #2 we got the rev 1.2 Changes in rev 1.2: - The silkscreen (the white color on the board)- a small change for using the PIN-DMD as input. A result from lucky1 and steve45´s Test with a real pin. The costs are: PCB: 1x PCB ($ 4.00) 1x shipping (Priority Mail 2-Day Small Flat Rate Box, Tuscaloosa, AL to Chicago, IL: $ 5.95 = 6.00) Total = $ 4.00 + $ 6.00 (S&H) And when anybody needs some Headers or Headers, Soldering Service and/or a STm32 Board: just add the Service cost below to the total from PCB + S&H Header Set: 1x 6 Pin Header (90° or straight) for ISP SD Card 1x 14 Pin (original DMD) 2x 16 Pin (Hub08 / Hub75) 1x 10 Pin Breakaway Header 2x Jumper Shunt 2x 50 Pin (STm32) Total = $ 3.00 Soldered on PCB and tested with RGB-DMD: 1x Header Set 1x Soldering 1x Test Total = $ 10.00 STm32 Board: !!! This Service is ONLY available in the USA and HARDWARE ONLY !!! 1x Stm32F407 VGT6 discovery Board 1x Test with RGB DMD have to be payed in advanced (to safe my money), when you don´t want that, please don´t order this Set. Thank you. Total = $ 27.00 !!! For legal reasons the STm32F4 is HARDWARE ONLY!!! Link to comment Share on other sites More sharing options...
17Al3x17 Posted November 3, 2015 Share Posted November 3, 2015 you have a picture of the wiring on the STM32F4 ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.