-
SYSTEM SEARCH
System Scanners Online:
Username: Guest
>> System Scan?
>> The Universe >
Incoming Message:
Due to system limitations searching with words of 3 or less characters will not return results. For instance; Doctor Who. This will not return results as the system is trying to search for both Doctor AND Who in which Who will not be found as it's a 3 character word. To find Doctor Who; you'd search for either Doctor or "Doctor Who".
Search Tips:
For specific searches; enclose your search with quotes. Example: "Doctor Who" or "Addams Family".
Search the Community
Showing results for tags '3d print'.
Found 4 results
-
These are STL files for 3D-printing this apron face. Height is enough to put RGB LED-strips at kickback, plunger and middle areas. Designed for these kind of 7"-screens: https://www.aliexpress.com/item/32702387923.html?spm=a2g0s.9042311.0.0.e3f44c4dlqptAw This has no bottom, but any regular piece of wood, metal or other stable material should probably work. Apron_launch_20200128.mp4 ApronV3_1.stl ApronV3_2_Standard.stl ApronV3_2_Widebody.stl ApronV3_2_Widebody_split1.stl ApronV3_2_Widebody_split2.stl ApronV3_3.stl ApronV3_4.stl
- 27 replies
-
- 5
-
-
- 7 screen
- standard body
- (and 3 more)
-
Version 1.0.0
191 downloads
Always wanted a 3d printed pinball controller but never found a design i liked. So started talking with 3Dfreeman on patreon if he was up for designing a pinball controller there are 2 other designs on his patreon free to download i have asked his permission to post the files here Don't just download and run have a look on the designers patreon he did most of the work https://www.patreon.com/c/3DFreeman/posts?vanity=3DFreeman Buttons needed 7x30mm 4x24mm 6x12mm and a extra 30mm if not using plunger still waiting on plunger and 12mm buttons going to fit mine with a kl25z and add a exciter on each side under the lockdown bar and maybe 1 or 2 solenoids -
Hi! I have a V3 Digital/Analog Plunger in my cab. Sadly, the slide block plastic piece broke in 2 parts. You can view this part on the attached file. My first idea was to take a look at the official website: https://zebsboards.ca I was shocked when I read that Zeb was no longer in business. Then, I was pleased to notice that support files were still available, until I clicked on the 3D Parts and Files link: 404 - The page you requested cannot be found! 😮 I tried contacting him using the last email address he published: no longer valid. So, I'm desperately looking for someone who has the file I'm searching for, or a contact who can help me about this... Thank you! Joe
-
My basic idea was that I wanted a Beacon on top of my backbox. Then I wanted a red one, and a blue one, and a yellow one, and a purple one. I want them all, but that would not fit so... This is a MX beacon with full color support by WS2812 LEDs!! There is DOF support already, but not many tables are configured (yet). Attached is STL files for 3D-printing and simple assembly info. MX Beacon_20210417_223237.mp4 MX_Beacon_Pt4.stl MX_Beacon_Pt3.stl MX_Beacon_Pt2.stl MX_Beacon_Pt1.stl
