Puppack crash/freeze Vpx

[Drakken]

Good morning, 🙂
 

On most tables with a PupPack (perhaps even all of them) it happens that the table freezes for a few seconds... then returns control (or crashes) and then lets the pupack freeze.

Even when returning to the Pinup menu, the pupack remains displayed and quitting for the desktop does not change anything: pupack still frozen...
Forced to kill Pinupdisplay before restarting Pinup.

Result a nice crash log:

Crash report VPX rev388 (f6d9f7b)
============
Process: VPinballX.exe
Reason: 0xC0000005 - EXCEPTION_ACCESS_VIOLATION at 0023:4F8B5A01
Attempt to read from 0x0000732C
Thread ID: 0x1E4C [7756]


 

Quote

Call stack
==========
4F8B5A01 dmddevicePUP.DLL (0x07F2E64C 0x00000020 0xFFFFFFFFFFFFFFFF 0x00440050)


Environment
===========
Date/time: 23/6/2023, 21:18:47:232
Number of CPUs: 8
Processor type: 586
System: Windows 10 (10.0 19044)


Memory status
=============
Total Reserved: 277812K (271M) bytes
Total Commited: 1621980K (1583M) bytes
Total Free: 2294448K (2240M) bytes
Largest Free: 2095296K (2046M) bytes


Registers
=========
EAX=00007330 EBX=4FA9109C ECX=FFFFFFF8 EDX=4FBBA180
ESI=00000001 EDI=00000000 EBP=00000000 ESP=07F2E5D0 EIP=0056005C
FLG=00010206 CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

Failed to save minidump.

 

Might be a system resource problem... however, even though I don't have a war machine, I find it strange that it can saturate the PC (i7 4790k + 16go ram + Nvidia 3070 + Vpx 10.8 or 10.7.4).
My config is on 3 screens + PIN2DMD.
I tried to reduce the videos of a puppack with the beats of NailBuster but nothing worked.
 

If anyone has had this problem before...
 

Thanks. 😃