jml927 Posted June 17, 2016 Posted June 17, 2016 Hey all, I need some assistance. I have DOF R3 beta installed, Visual Pinball 9.9.2, PinballX, PacLED64, and Sainsmart 8 relay USB controller. When I test the relay in the globalconfigtester, it seems to work and my solenoids work. The PacLED shows up in my cabinet config. However, when I start a table via Visual Pinball, or PinballX, none of the toys work. Here is what I have done so far; 1 - Installed DOF, unblocked all files 2 - Generated a cabinet.xml after multiple attempts 3 - Used the DOF config tool 4 - Put the inifiles into the /config folder 5 - Linked the VP plugins to the DOF folder 6 - Linked the PinballX plugins folder to the DOF folder and copied the PinballX dll over to the PinballX plugins folder and turned the plugin on in the PinballX plugin manager. 7 - Loaded and started a table and checked the b2s manager, it shows the DOF plugin. 8 - Made sure all COM objects were registered 9 - Tested the LEDs Vis LED Blinky and PacLED64 and they work in those But yet, it still doesn't work when launching a pinball table. My config/log files are here: https://dl.dropboxusercontent.com/u/44469647/Pinball/DirectOutput.log https://dl.dropboxusercontent.com/u/44469647/pinball/config/cabinet.xml https://dl.dropboxusercontent.com/u/44469647/pinball/config/directoutputconfig40.ini https://dl.dropboxusercontent.com/u/44469647/pinball/config/directoutputconfig20.ini https://dl.dropboxusercontent.com/u/44469647/pinball/config/GlobalConfiguration_b2SServer.xml https://dl.dropboxusercontent.com/u/44469647/pinball/config/tablemappings.xml I have a feeling I'm missing something basic, but I'm not sure what it is. My Relays on the sainsmart: Left Flipper - Port2 Right Flipper - Port 4 Pop bumper 1 - Port 3 Pop Bumper 2 - Port 5 Pop Bumper 3 - Port 6 Replay Kicker - Port 1 My LEDs on the PacLED: LED 1 - Credit Button LED 2 - Extra Ball Button LED 3 - Start Button LED 4 - Launch Button Any suggestions? Is my Cabinet.xml not correct? Is it something else?
outhere Posted June 17, 2016 Posted June 17, 2016 You don't by chance have more than one b-2s server setup on your system
jml927 Posted June 18, 2016 Author Posted June 18, 2016 Not that I'm aware of, the only one I have is in the tables directory, will check the registry and see if there is more than one instance
jml927 Posted June 18, 2016 Author Posted June 18, 2016 It appears that they point to: C:/Program Files (x86)/Visual Pinball/Tables/ which is where I run the setup for b2s. The version I am running is 1.3.0.1.
randr Posted June 18, 2016 Posted June 18, 2016 If your running Windows 8 or 10 remove vp and b2s/dof from program files folder unless you have permissions correct it won't work properly. Move everything to c:\visual pinball Sent from my iPhone using Tapatalk
jml927 Posted June 18, 2016 Author Posted June 18, 2016 Ok, tried moving it, cleaned up all the registry settings to point to the new directory. I did notice, that my DOF isn't getting my cabinet file when launching via B2S. I double click... It does get my cabinet.xml when using the DOF tester. Above is the B2S launch... Any ideas?
jml927 Posted June 19, 2016 Author Posted June 19, 2016 SOLVED!!! My GlobalConfig_*.xml was misnamed.
randr Posted June 19, 2016 Posted June 19, 2016 Awesome. Glad we were of no help but glad you got it fixed! Sent from my iPhone using Tapatalk
jml927 Posted June 19, 2016 Author Posted June 19, 2016 I'm still fighting with the PacLED64 though! I can't get the buttons to light!
jml927 Posted June 29, 2016 Author Posted June 29, 2016 No one out there running a pacled64 with DOF? Still struggling with cabinet lights...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.