Rappelbox Posted November 13, 2015 Author Posted November 13, 2015 I'm closing the preorder list now! I received the first parts today All other parts will hopefully arrive within the next week. Sadly, also the connectors are on their way so I can't begin to solder... Greets, Dom
Jafjas Posted November 13, 2015 Posted November 13, 2015 Nice! Can't wait to get my hand on this! Thanks for the update and the picture! Really appreciated. Best regards, Jasper
Rappelbox Posted November 14, 2015 Author Posted November 14, 2015 You're in our circle of trust (movie quote [emoji6])
Jafjas Posted November 15, 2015 Posted November 15, 2015 Hello Rappelbox I've got a few questions, I don't know how many times they have been asked before, so sorry for that. Do I have to buy a micro sd module? And if so, how much memory do I need? About the 5v power supply, can I use the one coming out of my pc's power supply or do I need to get a dedicated supply? Thanks! Jasper
Rappelbox Posted November 15, 2015 Author Posted November 15, 2015 No, card is only needed if you use a real pinball machine. You can use your pc-power supply but I'd prefer a separate one. They don't cost that much, around 15-20 bucks
gStAv Posted November 15, 2015 Posted November 15, 2015 I thought the SD-card reader was to load colored animations and pallet changes within the same ROM For both vp and real pinball. Maybe I misread this
Content Provider lucky1 Posted November 15, 2015 Content Provider Posted November 15, 2015 I thought the SD-card reader was to load colored animations and pallet changes within the same ROM For both vp and real pinball. Maybe I misread this You did ! When you use the controller with the RGB panels and for a vpin you currently don´t need a SD card. Palettes are loaded into RAM by the config tool via USB. There may be a use for it in the near future
luckyaa29 Posted November 16, 2015 Posted November 16, 2015 I am in France ( Europe) I m interested By The set 4 . So luckyaa29 / set 4 Thanks
Content Provider UncleSash Posted November 17, 2015 Content Provider Posted November 17, 2015 You did ! When you use the controller with the RGB panels and for a vpin you currently don´t need a SD card. Palettes are loaded into RAM by the config tool via USB. There may be a use for it in the near future You need one, when you want to save the actual color selection with a VPin cab. When you set your DMD to single color "red" and there is no SD-card in, you get the RGB color after next reset from the controller (reset = lose of 5V power or with the black reset button on board). Then you have to set the color again with the Pin2DMD.exe tool.
17Al3x17 Posted November 18, 2015 Posted November 18, 2015 Hi RappelBox, Any news for the connectors ?
Rappelbox Posted November 18, 2015 Author Posted November 18, 2015 Everyone will get a micro-sd card reader included call it an early Christmas gift. For cables, I have to wait till tomorrow, sadly. The displays have passed German customs and will be delivered tomorrow. I hope to start soldering the first parts by the end of the week. All other small things like pin headers etc are still on the way to Germany. I had to order them in Asia because European prices were insanely high. Greets, Dom
Jafjas Posted November 19, 2015 Posted November 19, 2015 Sounds good Rappelbox! Thanks for the update and good luck with all the soldering. What version of the pin2dmd board do we get, I guess the first edition? But the features are the same, oder habe Ich das falsch verstanden? Hertzlichen grüssen, Jasper
Rappelbox Posted November 19, 2015 Author Posted November 19, 2015 I did a different version of the board than UncleSash. Same functionality, just a different design.
Rappelbox Posted November 19, 2015 Author Posted November 19, 2015 https://www.dropbox.com/sh/tkoiruvwh1tvckh/AAAcpegMV8g7vnCopGMY9x-Oa?dl=0 First parts arrived, also first displays Had to stop because I still didn't receive the headers and connectors ;(
Content Provider UncleSash Posted November 19, 2015 Content Provider Posted November 19, 2015 I hope you also ordered some jumper...
Content Provider UncleSash Posted November 19, 2015 Content Provider Posted November 19, 2015 Nice! [emoji56]
Recommended Posts
Archived
This topic is now archived and is closed to further replies.