Content Provider freneticamnesic Posted October 7, 2015 Author Content Provider Posted October 7, 2015 Hope the pictures make sense!
Blashyrk Posted October 7, 2015 Posted October 7, 2015 Yes they do thanks for the pics Fren, but I have a problem since I drilled a 28mm hole through the cabinet I can't use the switch "brackets" with these shorter buttons.
Content Provider freneticamnesic Posted October 7, 2015 Author Content Provider Posted October 7, 2015 Yea same here.... the buttons are snug enough that they stay, but I gave them a shot of hot glue as well. I haven't yet found the longer flipper buttons in clear so I just had to make it work. If I knew which buttons I was going to use when I started building my cab I certainly would have cut the holes properly
Blashyrk Posted October 7, 2015 Posted October 7, 2015 I don't think the clear buttons are available in any other sizes, mjr did a writeup last year on rgb illuminated buttons and it looks like it works great, so I ordered these http://www.nicemite.com/LightmiteLB/LightmiteLB.htm
outhere Posted October 7, 2015 Posted October 7, 2015 I suppose a person could always countersink them about another eighth inch and have just the button protruding out of the cabinet.... I found this on the other site http://www.vpforums.org/index.php?showtopic=29316&hl=
Content Provider freneticamnesic Posted October 8, 2015 Author Content Provider Posted October 8, 2015 Yep the light mites work great but are expensive.
Blashyrk Posted October 8, 2015 Posted October 8, 2015 Well I bought the plain pcb, and some cheap rgb leds and resistors from ebay so it's not that expensive
jmh139 Posted November 16, 2015 Posted November 16, 2015 Would you share/sell the artwork for this pin? I am in the process of building a standard body and love the look.
Content Provider freneticamnesic Posted November 16, 2015 Author Content Provider Posted November 16, 2015 Yea I'll give it to you. I should note that up close it has some grain, noticeably in the black/dark areas of the artwork. It's good at a standard distance though. I'll send a link via PM this afternoon
jmh139 Posted November 16, 2015 Posted November 16, 2015 Yea I'll give it to you. I should note that up close it has some grain, noticeably in the black/dark areas of the artwork. It's good at a standard distance though. I'll send a link via PM this afternoon I really appreciate it, my kids love it. I plan to build pretty much exactly what you have built, I have a standard Williams body but am going to build a backbox to fit a 32" Thanks again!!!
Content Provider freneticamnesic Posted November 17, 2015 Author Content Provider Posted November 17, 2015 looks like i deleted the PSD files..... I have high resolution PNG files (not a big deal since it was all lossy image files anyways but still....) If you wanna try it, here's a link
jmh139 Posted November 17, 2015 Posted November 17, 2015 looks like i deleted the PSD files..... I have high resolution PNG files (not a big deal since it was all lossy image files anyways but still....) If you wanna try it, here's a link I am sure that will work, I just downloaded the zip to my Google Drive. I will probably not need it for another couple of months. Thanks again!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.