See Saw (Bally 1971)

it's a good table i just wish it had a sticky note or tape on it like most ems have, you cant save your high score unless you write it down....

i like very much oldies...thank you

TWO BALLY old are sky divers  and Montecarlo 1963

Thank you PinRich !

Another great recreation brought to life! 

Here is the IC and Flyer I upscaled for my front end, and a quick wheel. I also sent PinRich a new upscaled b2s. 

8 hours ago, tylerbmxer said:

it's a good table i just wish it had a sticky note or tape on it like most ems have, you cant save your high score unless you write it down....

you can!  With the table running hit F12 for the options menu and change this option to yes.  The table will save the high score even if it is not visible, but since the initials can't be entered it saves them for XFL.  

1 hour ago, PinRich said:

you can!  With the table running hit F12 for the options menu and change this option to yes.  The table will save the high score even if it is not visible, but since the initials can't be entered it saves them for XFL.  

oh thanks!!!! i didnt think to look at that. I'm glad you put that in. They make the table so much better in my opinion, would you be able to implement that feature in your previous tables too? like expressway and camelot? i checked those like immediately lol and they dont have it though.

3 minutes ago, tylerbmxer said:

oh thanks!!!! i didnt think to look at that. I'm glad you put that in. They make the table so much better in my opinion, would you be able to implement that feature in your previous tables too? like expressway, el toro and camelot? i checked those like immediately lol and they dont have it though.

Great recreation ... very happy to see it in VPX. I own the real machine which needs some touchups.

Thank you very much 🥰

my version of the B2S

See Saw (Bally 1971).directb2s

Thanks, I really like these old tables.  Wanted to offer some feedback if you're going to continue to update it.  I noticed that balls coming down from the top are getting funneled down the middle more often than you'd see on a real table.  Comparing to photos and videos of the real table, it looks like it's because the upper plastics (above each bonus hole) are a little wider than they should be, and the plastics at the flippers aren't as wide as they should be.  The bottom posts of the plastics behind each flipper should be closer to the point of the red shapes on the playfield.   These changes would tighten the flipper gap a bit and better align the geometry.

On 6/6/2026 at 3:06 AM, RepairDan57 said:

Thank you PinRich !

 

Love the DMD you have there! I didn't see it on the B2S files, can you tell me where you found it or did I just miss it? Thanks!

4 hours ago, newmanwj said:

Love the DMD you have there! I didn't see it on the B2S files, can you tell me where you found it or did I just miss it? Thanks!

I made this from a screen grab, modified it using windows paint put it in my PinballY . Valen has made a new backglass  that is much clearer and has a better version on the side table are in the DMD .

https://www.vpforums.org/index.php?app=downloads&showfile=19801

10 hours ago, RepairDan57 said:

I made this from a screen grab, modified it using windows paint put it in my PinballY . Valen has made a new backglass  that is much clearer and has a better version on the side table are in the DMD .

https://www.vpforums.org/index.php?app=downloads&showfile=19801

Thanks so much!

Thank you, a fun table.

I added this in the table init section, to hide the rails and lockbar in cabinet mode:

    For each item in cRails
        If Table1.ShowDT then
            item.Visible = 1
        Else
            item.Visible = 0
        End If
    Next

I also set the FS Image to "Black" in the backglass view, so the background is all black when the table POV is set to not be stretched sideways.

Thanks guys for these tables, Excellent job! 

Cute table, not easy to find in the wild. Resources must be hard to find for sure but you guys did a great job!

Of course I had to do some fixes of my own- first thing always is add SetLocale 1033 under Option Explicit and Randomize. 

Next I always have to remove Jeff's (loserman) extraneous screw head he always left floating in space. I believe it was screw047 this time. 

I added cab gaps, better rail prims, remove JP's silly rail shadow flashers, add glass channels. Mostly my eyes can't tolerate crooked plastics so I straightened those out on the sheet and redrew the acrylic walls to match. 

I'm always happy to see @teisen do his magic which gave me a good reason to do some of my own stuff. 

Happy to see you do the not so common stuff @PinRich! Thanks!

6 minutes ago, Cliffy said:

Cute table, not easy to find in the wild. Resources must be hard to find for sure but you guys did a great job!

Of course I had to do some fixes of my own- first thing always is add SetLocale 1033 under Option Explicit and Randomize. 

Next I always have to remove Jeff's (loserman) extraneous screw head he always left floating in space. I believe it was screw047 this time. 

I added cab gaps, better rail prims, remove JP's silly rail shadow flashers, add glass channels. Mostly my eyes can't tolerate crooked plastics so I straightened those out on the sheet and redrew the acrylic walls to match. 

I'm always happy to see @teisen do his magic which gave me a good reason to do some of my own stuff. 

Happy to see you do the not so common stuff @PinRich! Thanks!

Cliffy, your adjustments always make a difference!

Damn, I saw that stray screw on the right side of the table and completely forgot to remove it... hahaha

I can't seem to get DOF working on this one...couldn't find it in the script - however dofconfig has 'seesaw' listed...Is there a different version of this with DOF?

Hi, the table is wonderful as always but only me I have some occasional suttering? I have these spike only when the ball pass through the upper 4 holes

On 6/10/2026 at 2:03 PM, newmanwj said:

Thanks so much!

Could you share your pov cabinet view?

Wow nice work! this turn out very good. Excellent lighting and very clean table.

I played around with the backglass and adjusted the image to fit better by cropping it and added my own reels with new a font that seems to be pretty close, I'm sure Hauntfreaks will make us one top notch. Try it if you want: 

See Saw (Bally 1971) 1.1.directb2s

On 6/15/2026 at 7:11 AM, sorbeppe said:

Could you share your pov cabinet view?

 

Happy to, here you are!

Galahad (Bally 1970)POV.ini

2 minutes ago, newmanwj said:

Happy to, here you are!

Galahad (Bally 1970)POV.ini 864 B · 0 downloads

Ehm this is See Saw ahah

21 hours ago, sorbeppe said:

Ehm this is See Saw ahah

 

🤦‍♂️Sorry about that, here you go!

See Saw (Bally 1971)POV.ini