Search the Community

Please private message me if you live close to zip code 07002. Specifically bayonne,NJ and know how to inatall a full addressble rgb setup for my new 42inch build. I would like to learn and help install the setup. $1k pay for someone who can help me out with that and the finishing touches on my build. Appreciate the help, Unfortunately i have a sick family member that has taken up lots of my time right at theat the end. So if you can properly setup and install a full rgb setup and want to make a quick grand message me.

View File Masters of the Universe: Mastered, DOFLinx MX Cabinet Edition Masters of the Universe: Mastered. DOFLinx MX Cabinet Edition You have the power of the ultimate light show in a pinball cabinet! This is the first Future Pinball table to use addressable leds thanks to the new DOF led MX support in DOFLinx 5.20! You have never seen a light show quite like this in a pinball cabinet! Amazing effects and animation that surround the playfield! A video demonstration can be seen here in my cabinet: This table has the complete cabinet feedback and lighting support for the following: - 10 solenoids for flipper, slingshots, bumpers, etc.. - 5 RGB flashers - Blower Fan - Shaker - Gear motor - Strobe - Beacon - Start button - Coin button - Launch Ball button - RGB Undercab Lighting - Addressable leds Requirements: - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects). - DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds. - addressable leds are NOT required to play this table, but they are HIGHLY recommended. - to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball) To play a Future Pinball table with addressable leds support (DOFLinx MX): - update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball \ Scripts". - add DIRECTOUTPUTGLOBAL=c:\DirectOuput\Config\GLobalConfig_b2sServer.xml (assuming you have it there) to your DOFLinx.ini file. - download the awesomeness of a Future Pinball DOFLinx MX table - check DOF Config Tool to see if support for that table has been added to it yet (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet. - "Generate" a new Config File (containing directoutputconfig30.ini in the zip) and copy the new files to your "DirectOutput \ Configs" folder. - play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds! DOFLinx 5.20+ download link: http://www.vpforums....&showfile=12318 Submitter TerryRed Submitted 09/25/2017 Category Future Pinball Tables Link to Media Pack  

View File Retroflair: DOFLinx MX Cabinet Edition Retroflair: DOFLinx MX Cabinet Edition Witness a modern light show in a retro theme, thanks to the new DOF addressable led MX support in DOFLinx 5.20! A video demonstration in my cabinet can be seen here: This table have the complete cabinet feedback and lighting support for the following: - 10 solenoids for flipper, slingshots, bumpers, etc.. - 5 RGB flashers - Blower Fan - Shaker - Gear motor - Strobe - Beacon - Start button - Coin button - Launch Ball button - RGB Undercab Lighting - Addressable leds Requirements: - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects). - DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds. - addressable leds are NOT required to play this table, but they are HIGHLY recommended. - to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball) To play a Future Pinball table with addressable leds support (DOFLinx MX): - update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball \ Scripts". - add DIRECTOUTPUTGLOBAL=c:\DirectOuput\Config\GLobalConfig_b2sServer.xml (assuming you have it there) to your DOFLinx.ini file. - download the awesomeness of a Future Pinball DOFLinx MX table - check DOF Config Tool to see if support for that table has been added to it yet (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet. - "Generate" a new Config File (containing directoutputconfig30.ini in the zip) and copy the new files to your "DirectOutput \ Configs" folder. - play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds! DOFLinx 5.20+ download link: http://www.vpforums.org/index.php?app=downloads&showfile=12318 Consult the DOFLinx guide included in the download link for more information on setting up DOFLinx. Submitter TerryRed Submitted 09/28/2017 Category Future Pinball Tables Link to Media Pack  

View File Avatar (Ultimate): DOFLinx MX Cabinet Edition The most amazing lighting in a pinball cabinet allows for particle effects, great explosions, electrical effects, and machine gun fire, thanks to the new DOF addressable led MX support in DOFLinx 5.20! A video demonstration can be seen here in my cabinet: This table has complete cabinet feedback and lighting support for the following: – 10 solenoids for flipper, slingshots, bumpers, etc.. – 5 RGB flashers – Blower Fan – Shaker – Gear motor – Strobe – Beacon – Start button – Coin button – Launch Ball button – RGB Undercab Lighting – Addressable Leds Requirements: - DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects). - DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds. - addressable leds are NOT required to play this table, but they are HIGHLY recommended. - to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball) To play a Future Pinball table with addressable leds support (DOFLinx MX): - update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball Scripts". - add DIRECTOUTPUTGLOBAL=c:DirectOuputConfigGLobalConfig_b2sServer.xml (assuming you have it there) to your DOFLinx.ini file. - download the awesomeness of a Future Pinball DOFLinx MX table - check DOF Config Tool to see if support for that table has been added to it yet (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet. - "Generate" a new Config File (containing directoutputconfig30.ini in the zip) and copy the new files to your "DirectOutput Configs" folder. - play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds! DOFLinx 5.20+ download link: http://www.vpforums.org/index.php?app=downloads&showfile=12318 Consult the DOFLinx guide included in the download link for more information on setting up DOFLinx. Submitter TerryRed Submitted 10/03/17 Category Future Pinball DOFLinx Tables Modified by  

In preparation for an upcoming build, I was going-through the DOF docs and wiki and was wondering, if I could create an Addressable RGB Flipper pair + Addressable RGB Left- and Right-Magnasaves from WS2812s. I'm thinking so, since there are MX types for these. So, out of curiosity, I started checking-out the stats to see which, and how many tables were using the MX types. I was surprised that the number of tables between the regular Flippers and MX Flippers were so different; not sure if this is because they need to be coded in the table scripts, or if someone hasn't yet coded/colored it on the DOF site. I have attached an Excel Spreadsheet noting the differences. What is also a bit unusual (if it's just a matter of entering into the DOF site, is that there are some tables where there is an MX type, but not the regular RGB type, and there are also some tables where the color is different between the two--Cosmic Princess comes to mind, and I think both are actually wrong. I think the color is supposed to be white for the flips (as per photos), but the RGB is YELLOW and the MX is BLUE (I think that's because the flyer has a blue hue to it). MAGNASAVE LEFT RGB missing 1 (i.e., Magnsave Left MX has this) MAGNASAVE LEFT MX missing: 11 MAGNASAVE RIGHT RGB missing 3 MAGNASAVE RIGHT MX missing 14 FLIPPERS RGB missing 5 FLIPPERS MX missing 77 Not sure if this is a mountain of work to get the MX versions in-sync with the regular versions, but these are what I noticed DOF_Button_Spreadsheet.xlsx