[New VP10 Alert] Rack Em UP (Gottlieb 1983)_Hybrid

[teisen]

View File

Rack Em UP (Gottlieb 1983)_Hybrid

---

First of all, I would like to thank my friend kalavera for approving the small update I made and especially for the excellent work done and for making it available!
 
I also thank the creators and contributors of the initial versions, Inkochnito, TAB, LuvThatApex, Destruk, dboyrecords, wildman, STAT and Bord.
 
And a special thanks to JPSalas for helping me with the rolling ball sounds routine!
 
The work itself was very well done, so the changes I made were few to try to make the table even better.
 
- small touches on the playfield
- small touches on plastics
- new tabs and tweaks
- new metals
- new lighting
- flipper sounds
- new cap bumpers
- illuminated bumper base
- new backdrop
- new POV
- some small adjustments
 
here is the link to the original table used    

 
kalavera description:
Thanks to :
Inkochnito for your Dipswitchs
TAB, LuvThatApex and Destruk, for your version VP8
dboyrecords for your conversion and rotation in VP9
Also thanks to all those who got involved in one way or another (wildman in backglass, STAT in media pack, and if I forget someone I apologize)
Thanks To Bord for his beautiful primitive flippers, implement them in this table.
The table was recreated from scratch, the playfield try to make it as similar as possible to the original, there are few good photos out there, so i did what i could, hope the final result will please you, the door at the top where it comes out the ball to the field of play is not the model that should be, but as i'm not good with 3D modeling is what i could achieve, if someone is encouraged to recreate it and send to me, would replace it immediately, try to recreate the physics as best i could using the three videos find on Youtube.

---

• Submitter
  teisen
• Submitted
  01/17/24
• Category
  VPX - Pinball Tables
• VPX Standalone
  No

 

[digitalarts]

Excellent as usual, Teisen!

[DomiKamu]

Doesn't work, ROM is missing (rackemup), but the description indicates "None" for "ROM Name". 🤔

The once "rackemup.zip" ROM I've found doesn't work, unfortunately! (VPinMame 3.6 doesn't report invalid ROM checksum).

Edited October 16, 2024 by DomiKamu

[robertms]

1 hour ago, DomiKamu said:

Doesn't work, ROM is missing (rackemup), but the description indicates "None" for "ROM Name". 🤔

The once "rackemup.zip" ROM I've found doesn't work, unfortunately! (VPinMame 3.6 doesn't report invalid ROM checksum).

 

Get the rom rackemup.zip from Pinball Nirvana, works fine.

[DomiKamu]

6 hours ago, robertms said:

 

Get the rom rackemup.zip from Pinball Nirvana, works fine.

 

Thank you, I've got it elsewhere, as updated ROM for PinMame 3.6 Beta and higher. Also I've checked it by using VPX\VPinMame\Setup64.exe tool, to be sure.

Thanks anyway, Robert! 😉👍

Edited October 16, 2024 by DomiKamu