randr Posted November 7, 2013 Share Posted November 7, 2013 I have been struggling with this for some time even while beta testing… I will use baseball and or kings and queens as examples… I download new config off tool site, download new table version from drop box config and backglass but all i get is undercab lights…no other feedback. So i must be missing something simple? is a global config needed for E configs? or some other config i must be missing? Sorry but im just not finding the solution on the documentation site. I did find a typo under direct output menu under ledcontrol config…table is spelled Cable…LMAO! so i have been reading.. Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 Are you saying none of the E version tables work for you other then the under cab lights? I assume you have the led config tool set to DOF ? If regular tables are working with DOF for you there's no reason why the e versions wouldn't work. Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 Yes all tables work but not e tables except undercab lights. Only the under cab lights work on e tables nothing else Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 Cv works fine also Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 Select one of the E version tables in the config tool. Do you see entries in there other then under cab lighting? Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 I assume you are using my versions of the tables in the Dropbox. Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 yes im using your tables Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 This is strange, get me on chat. Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 Is very odd. All ss tables are working dof but just undercab lights work on e tables...though scarface works... I did delete all legacy led control files..I must be missing something simple. Where does the global config file go? In config folder? Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 make sure in your vp tables folder you delete the ledcontrol.ini and if there is ledwiztoolbox.vbs Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 Will double check those when I get back home Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 I can teamviewer into your computer if you want Link to comment Share on other sites More sharing options...
zeenon Posted November 7, 2013 Share Posted November 7, 2013 Bent98, What do the E versions of the tables give you? I've been using DOF for the last 2 months and everything (shaker/gear/strobe/lights) worked fine, am I missing something by not using these tables? Z Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 Zeenon you have feedback on kings and queens? baseball? joker poker? Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted November 7, 2013 Content Provider Share Posted November 7, 2013 It seems it is linked to tables with old b2s, outside hyperpin, does that change anything? Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 negative. here is my log. never had a global config but added today and still no go for e tables...other thatn start light and undercab lighting ---------------------------------------------------------------------------------2013.11.08 00:06:18.307 DirectOutput Logger initialized2013.11.08 00:06:18.307 DirectOutput Version 0.6.5050.39165 as of 2013.10.29 21:452013.11.08 00:06:18.307 Debug: Writting of debug log messages is enabled2013.11.08 00:06:18.307 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 00:06:18.307 Loading Pinball parts2013.11.08 00:06:18.307 Loading script files2013.11.08 00:06:18.307 Script files loaded2013.11.08 00:06:18.307 Loading cabinet2013.11.08 00:06:18.307 No cabinet config file loaded. Will use AutoConfig.2013.11.08 00:06:18.307 Cabinet auto configuration started2013.11.08 00:06:18.327 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 00:06:18.327 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 00:06:18.327 Cabinet auto configuration finished2013.11.08 00:06:18.327 Cabinet loaded2013.11.08 00:06:18.327 Loading table config2013.11.08 00:06:18.337 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 00:06:18.337 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName kingsandqueens2013.11.08 00:06:18.337 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 00:06:18.357 Warning: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:06:18.357 EXCEPTION: Could not parse setting 60 in column data W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60.2013.11.08 00:06:18.357 EXCEPTION: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:06:18.357 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)2013.11.08 00:06:18.357 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)2013.11.08 00:06:18.357 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)2013.11.08 00:06:18.357 EXCEPTION: Targetsite: Void ParseSettingData(System.String)2013.11.08 00:06:18.357 Warning: Previous exceptions occured in the line hothand,S15/S46,S48,S14/W19,S13,S9/W21/W23/W28 60/W29 60/W30 60/W31 60/W32 60,S11/W16,W13,W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60,S6,0,0,0,ON,ON Green,S11 Yellow Blink 400 f200/S14 Green/W9 Red/W11 Yellow/W16 Yellow/W18 Red/W19 Green/W28 Red f50 100,S11 Magenta Blink 400 f200/S14 Red/W9 White/W10 White/W11 Green/W13 Yellow/W16 Red/W19 Red/W29 Yellow f50 100,W13 Red/W30 White f50 100/W11 Green,S13 Red/W9 White/W12 Red/W13 Yellow/W20 Magenta/W21 Magenta/W23 Magenta/W24 Magenta/W31 Cyan f50 100,S13 Green/W12 Yellow/W17 Red/W20 Cyan/W21 Cyan/W23 Cyan/W24 Cyan/W32 Green f50 100,S6 300/S15 300 of the ledcontrol file2013.11.08 00:06:18.367 Warning: To many outputs (>32) are configured in the following line robo,S25/S26/S46,S16/S48,W21,W22,S29/W48 Blue,S27/S28/S30/W46,W47 Blue,0,0,0,W14 Blink fd500 fu550,W23 600 I32,ON,ON Blue,S7 Red/S8 White/S16 Red/W33 Green/W34 Green/W35 Green/W36 Green/W46 Blue,S9 Blue/W21 Blue/W25 Green/W44 Red,S12 Red/S25 White/W26 Yellow/W41 Yellow/W42 Yellow/W43 Yellow/W47 Blue,S1 Yellow/S2 Red/S3 Yellow/S14 Red/S15 Blue/W22 Blue/W27 Red,S4 Purple/S5 Orange/S6 Green/S13 Blue/W48 Blue,S27 300/S28 300/S29 300/S30 300/S32 300/W31 420 24/W32 400 102013.11.08 00:06:18.397 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 00:06:18.397 Config for RomName kingsandqueens exists in LedControl data. Updating cabinet and config.2013.11.08 00:06:18.397 Table config loading finished2013.11.08 00:06:18.397 Pinball parts loaded2013.11.08 00:06:18.397 Starting processes2013.11.08 00:06:18.397 Initializing cabinet2013.11.08 00:06:18.397 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 00:06:18.397 Updater thread for LedWiz 01 started.2013.11.08 00:06:18.397 Cabinet initialized2013.11.08 00:06:18.397 Framework initialized.2013.11.08 00:06:18.397 Have fun! 2013.11.08 00:06:31.057 Finishing framework2013.11.08 00:06:31.057 Finishing cabinet2013.11.08 00:06:32.087 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 00:06:32.087 Cabinet finished2013.11.08 00:06:32.087 Duration statistics:2013.11.08 00:06:32.087 OutputControllers - LedWiz2013.11.08 00:06:32.087 - LedWiz 01 OnOff updates, Values count: 2, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:06:32.087 - LedWiz 01 PWM updates, Values count: 02013.11.08 00:06:32.087 - LedWiz 01 update calls, Values count: 4, Total: 10.0ms, Avg.: 2.5ms, Min.: 0ns, Max.: 10.0ms2013.11.08 00:06:32.087 Pinball - Alarm calls2013.11.08 00:06:32.087 - Alarm calls, Values count: 02013.11.08 00:06:32.087 - Interval Alarm calls, Values count: 02013.11.08 00:06:32.087 Pinball - Table element update calls2013.11.08 00:06:32.087 - EMTable, Values count: 02013.11.08 00:06:32.087 - GetMech, Values count: 02013.11.08 00:06:32.087 - GIString, Values count: 02013.11.08 00:06:32.087 - Lamp, Values count: 02013.11.08 00:06:32.087 - LED, Values count: 02013.11.08 00:06:32.087 - Mech, Values count: 02013.11.08 00:06:32.087 - Score, Values count: 02013.11.08 00:06:32.087 - ScoreDigit, Values count: 02013.11.08 00:06:32.087 - Solenoid, Values count: 02013.11.08 00:06:32.087 - Switch, Values count: 02013.11.08 00:06:32.087 - Unknown, Values count: 02013.11.08 00:06:32.087 DirectOutput framework finished.2013.11.08 00:06:32.087 Bye and thanks for using!---------------------------------------------------------------------------------2013.11.08 00:06:42.144 DirectOutput Logger initialized2013.11.08 00:06:42.144 DirectOutput Version 0.6.5050.39165 as of 2013.10.29 21:452013.11.08 00:06:42.144 Debug: Writting of debug log messages is enabled2013.11.08 00:06:42.144 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 00:06:42.144 Loading Pinball parts2013.11.08 00:06:42.144 Loading script files2013.11.08 00:06:42.144 Script files loaded2013.11.08 00:06:42.144 Loading cabinet2013.11.08 00:06:42.144 No cabinet config file loaded. Will use AutoConfig.2013.11.08 00:06:42.144 Cabinet auto configuration started2013.11.08 00:06:42.284 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 00:06:42.284 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 00:06:42.284 Cabinet auto configuration finished2013.11.08 00:06:42.284 Cabinet loaded2013.11.08 00:06:42.284 Loading table config2013.11.08 00:06:42.284 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 00:06:42.284 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName kingsandqueens2013.11.08 00:06:42.300 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 00:06:42.331 Warning: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:06:42.331 EXCEPTION: Could not parse setting 60 in column data W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60.2013.11.08 00:06:42.331 EXCEPTION: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:06:42.331 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)2013.11.08 00:06:42.331 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)2013.11.08 00:06:42.331 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)2013.11.08 00:06:42.331 EXCEPTION: Targetsite: Void ParseSettingData(System.String)2013.11.08 00:06:42.331 Warning: Previous exceptions occured in the line hothand,S15/S46,S48,S14/W19,S13,S9/W21/W23/W28 60/W29 60/W30 60/W31 60/W32 60,S11/W16,W13,W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60,S6,0,0,0,ON,ON Green,S11 Yellow Blink 400 f200/S14 Green/W9 Red/W11 Yellow/W16 Yellow/W18 Red/W19 Green/W28 Red f50 100,S11 Magenta Blink 400 f200/S14 Red/W9 White/W10 White/W11 Green/W13 Yellow/W16 Red/W19 Red/W29 Yellow f50 100,W13 Red/W30 White f50 100/W11 Green,S13 Red/W9 White/W12 Red/W13 Yellow/W20 Magenta/W21 Magenta/W23 Magenta/W24 Magenta/W31 Cyan f50 100,S13 Green/W12 Yellow/W17 Red/W20 Cyan/W21 Cyan/W23 Cyan/W24 Cyan/W32 Green f50 100,S6 300/S15 300 of the ledcontrol file2013.11.08 00:06:42.331 Warning: To many outputs (>32) are configured in the following line robo,S25/S26/S46,S16/S48,W21,W22,S29/W48 Blue,S27/S28/S30/W46,W47 Blue,0,0,0,W14 Blink fd500 fu550,W23 600 I32,ON,ON Blue,S7 Red/S8 White/S16 Red/W33 Green/W34 Green/W35 Green/W36 Green/W46 Blue,S9 Blue/W21 Blue/W25 Green/W44 Red,S12 Red/S25 White/W26 Yellow/W41 Yellow/W42 Yellow/W43 Yellow/W47 Blue,S1 Yellow/S2 Red/S3 Yellow/S14 Red/S15 Blue/W22 Blue/W27 Red,S4 Purple/S5 Orange/S6 Green/S13 Blue/W48 Blue,S27 300/S28 300/S29 300/S30 300/S32 300/W31 420 24/W32 400 102013.11.08 00:06:42.362 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 00:06:42.362 Config for RomName kingsandqueens exists in LedControl data. Updating cabinet and config.2013.11.08 00:06:42.378 Table config loading finished2013.11.08 00:06:42.378 Pinball parts loaded2013.11.08 00:06:42.378 Starting processes2013.11.08 00:06:42.378 Initializing cabinet2013.11.08 00:06:42.378 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 00:06:42.393 Updater thread for LedWiz 01 started.2013.11.08 00:06:42.393 Cabinet initialized2013.11.08 00:06:42.393 Framework initialized.2013.11.08 00:06:42.393 Have fun! 2013.11.08 00:06:57.653 Finishing framework2013.11.08 00:06:57.653 Finishing cabinet2013.11.08 00:06:58.683 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 00:06:58.683 Cabinet finished2013.11.08 00:06:58.683 Duration statistics:2013.11.08 00:06:58.683 OutputControllers - LedWiz2013.11.08 00:06:58.683 - LedWiz 01 OnOff updates, Values count: 3, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:06:58.683 - LedWiz 01 PWM updates, Values count: 1, Total: 62.4ms, Avg.: 62.4ms, Min.: 62.4ms, Max.: 62.4ms2013.11.08 00:06:58.683 - LedWiz 01 update calls, Values count: 3, Total: 93.6ms, Avg.: 31.2ms, Min.: 0ns, Max.: 78.0ms2013.11.08 00:06:58.683 Pinball - Alarm calls2013.11.08 00:06:58.683 - Alarm calls, Values count: 02013.11.08 00:06:58.683 - Interval Alarm calls, Values count: 02013.11.08 00:06:58.683 Pinball - Table element update calls2013.11.08 00:06:58.683 - EMTable, Values count: 02013.11.08 00:06:58.683 - GetMech, Values count: 02013.11.08 00:06:58.683 - GIString, Values count: 02013.11.08 00:06:58.683 - Lamp, Values count: 02013.11.08 00:06:58.683 - LED, Values count: 02013.11.08 00:06:58.683 - Mech, Values count: 02013.11.08 00:06:58.683 - Score, Values count: 02013.11.08 00:06:58.683 - ScoreDigit, Values count: 02013.11.08 00:06:58.683 - Solenoid, Values count: 02013.11.08 00:06:58.683 - Switch, Values count: 02013.11.08 00:06:58.683 - Unknown, Values count: 02013.11.08 00:06:58.683 DirectOutput framework finished.2013.11.08 00:06:58.683 Bye and thanks for using!2013.11.08 00:07:12.083 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 00:07:12.083 Loading Pinball parts2013.11.08 00:07:12.083 Loading script files2013.11.08 00:07:12.083 Script files loaded2013.11.08 00:07:12.083 Loading cabinet2013.11.08 00:07:12.083 No cabinet config file loaded. Will use AutoConfig.2013.11.08 00:07:12.083 Cabinet auto configuration started2013.11.08 00:07:12.113 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 00:07:12.113 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 00:07:12.113 Cabinet auto configuration finished2013.11.08 00:07:12.113 Cabinet loaded2013.11.08 00:07:12.113 Loading table config2013.11.08 00:07:12.113 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 00:07:12.113 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName matahari2013.11.08 00:07:12.113 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 00:07:12.133 Warning: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:07:12.133 EXCEPTION: Could not parse setting 60 in column data W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60.2013.11.08 00:07:12.133 EXCEPTION: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:07:12.133 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)2013.11.08 00:07:12.133 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)2013.11.08 00:07:12.133 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)2013.11.08 00:07:12.133 EXCEPTION: Targetsite: Void ParseSettingData(System.String)2013.11.08 00:07:12.133 Warning: Previous exceptions occured in the line hothand,S15/S46,S48,S14/W19,S13,S9/W21/W23/W28 60/W29 60/W30 60/W31 60/W32 60,S11/W16,W13,W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60,S6,0,0,0,ON,ON Green,S11 Yellow Blink 400 f200/S14 Green/W9 Red/W11 Yellow/W16 Yellow/W18 Red/W19 Green/W28 Red f50 100,S11 Magenta Blink 400 f200/S14 Red/W9 White/W10 White/W11 Green/W13 Yellow/W16 Red/W19 Red/W29 Yellow f50 100,W13 Red/W30 White f50 100/W11 Green,S13 Red/W9 White/W12 Red/W13 Yellow/W20 Magenta/W21 Magenta/W23 Magenta/W24 Magenta/W31 Cyan f50 100,S13 Green/W12 Yellow/W17 Red/W20 Cyan/W21 Cyan/W23 Cyan/W24 Cyan/W32 Green f50 100,S6 300/S15 300 of the ledcontrol file2013.11.08 00:07:12.143 Warning: To many outputs (>32) are configured in the following line robo,S25/S26/S46,S16/S48,W21,W22,S29/W48 Blue,S27/S28/S30/W46,W47 Blue,0,0,0,W14 Blink fd500 fu550,W23 600 I32,ON,ON Blue,S7 Red/S8 White/S16 Red/W33 Green/W34 Green/W35 Green/W36 Green/W46 Blue,S9 Blue/W21 Blue/W25 Green/W44 Red,S12 Red/S25 White/W26 Yellow/W41 Yellow/W42 Yellow/W43 Yellow/W47 Blue,S1 Yellow/S2 Red/S3 Yellow/S14 Red/S15 Blue/W22 Blue/W27 Red,S4 Purple/S5 Orange/S6 Green/S13 Blue/W48 Blue,S27 300/S28 300/S29 300/S30 300/S32 300/W31 420 24/W32 400 102013.11.08 00:07:12.173 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 00:07:12.173 Config for RomName matahari exists in LedControl data. Updating cabinet and config.2013.11.08 00:07:12.173 Table config loading finished2013.11.08 00:07:12.173 Pinball parts loaded2013.11.08 00:07:12.173 Starting processes2013.11.08 00:07:12.173 Initializing cabinet2013.11.08 00:07:12.173 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 00:07:12.173 Updater thread for LedWiz 01 started.2013.11.08 00:07:12.173 Cabinet initialized2013.11.08 00:07:12.173 Framework initialized.2013.11.08 00:07:12.173 Have fun! 2013.11.08 00:08:16.963 Finishing framework2013.11.08 00:08:16.963 Finishing cabinet2013.11.08 00:08:17.993 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 00:08:17.993 Cabinet finished2013.11.08 00:08:17.993 Duration statistics:2013.11.08 00:08:17.993 OutputControllers - LedWiz2013.11.08 00:08:17.993 - LedWiz 01 OnOff updates, Values count: 6, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:08:17.993 - LedWiz 01 PWM updates, Values count: 02013.11.08 00:08:17.993 - LedWiz 01 update calls, Values count: 120, Total: 10.0ms, Avg.: 83.0µs, Min.: 0ns, Max.: 10.0ms2013.11.08 00:08:17.993 Pinball - Alarm calls2013.11.08 00:08:17.993 - Alarm calls, Values count: 02013.11.08 00:08:17.993 - Interval Alarm calls, Values count: 02013.11.08 00:08:17.993 Pinball - Table element update calls2013.11.08 00:08:17.993 - EMTable, Values count: 02013.11.08 00:08:17.993 - GetMech, Values count: 02013.11.08 00:08:17.993 - GIString, Values count: 02013.11.08 00:08:17.993 - Lamp, Values count: 74, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:08:17.993 - LED, Values count: 473, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:08:17.993 - Mech, Values count: 02013.11.08 00:08:17.993 - Score, Values count: 02013.11.08 00:08:17.993 - ScoreDigit, Values count: 02013.11.08 00:08:17.993 - Solenoid, Values count: 35, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:08:17.993 - Switch, Values count: 17, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:08:17.993 - Unknown, Values count: 02013.11.08 00:08:17.993 DirectOutput framework finished.2013.11.08 00:08:17.993 Bye and thanks for using!2013.11.08 00:09:33.343 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 00:09:33.343 Loading Pinball parts2013.11.08 00:09:33.343 Loading script files2013.11.08 00:09:33.343 Script files loaded2013.11.08 00:09:33.343 Loading cabinet2013.11.08 00:09:33.343 No cabinet config file loaded. Will use AutoConfig.2013.11.08 00:09:33.343 Cabinet auto configuration started2013.11.08 00:09:33.343 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 00:09:33.343 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 00:09:33.343 Cabinet auto configuration finished2013.11.08 00:09:33.343 Cabinet loaded2013.11.08 00:09:33.343 Loading table config2013.11.08 00:09:33.343 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 00:09:33.343 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName matahari2013.11.08 00:09:33.343 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 00:09:33.363 Warning: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:09:33.363 EXCEPTION: Could not parse setting 60 in column data W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60.2013.11.08 00:09:33.363 EXCEPTION: Cant parse the part 60 of the ledcontrol table config setting 60.2013.11.08 00:09:33.363 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)2013.11.08 00:09:33.363 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)2013.11.08 00:09:33.363 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)2013.11.08 00:09:33.363 EXCEPTION: Targetsite: Void ParseSettingData(System.String)2013.11.08 00:09:33.363 Warning: Previous exceptions occured in the line hothand,S15/S46,S48,S14/W19,S13,S9/W21/W23/W28 60/W29 60/W30 60/W31 60/W32 60,S11/W16,W13,W12/W20/W24/W36 60/W37 60/W38/60/W39 60/W40 60,S6,0,0,0,ON,ON Green,S11 Yellow Blink 400 f200/S14 Green/W9 Red/W11 Yellow/W16 Yellow/W18 Red/W19 Green/W28 Red f50 100,S11 Magenta Blink 400 f200/S14 Red/W9 White/W10 White/W11 Green/W13 Yellow/W16 Red/W19 Red/W29 Yellow f50 100,W13 Red/W30 White f50 100/W11 Green,S13 Red/W9 White/W12 Red/W13 Yellow/W20 Magenta/W21 Magenta/W23 Magenta/W24 Magenta/W31 Cyan f50 100,S13 Green/W12 Yellow/W17 Red/W20 Cyan/W21 Cyan/W23 Cyan/W24 Cyan/W32 Green f50 100,S6 300/S15 300 of the ledcontrol file2013.11.08 00:09:33.383 Warning: To many outputs (>32) are configured in the following line robo,S25/S26/S46,S16/S48,W21,W22,S29/W48 Blue,S27/S28/S30/W46,W47 Blue,0,0,0,W14 Blink fd500 fu550,W23 600 I32,ON,ON Blue,S7 Red/S8 White/S16 Red/W33 Green/W34 Green/W35 Green/W36 Green/W46 Blue,S9 Blue/W21 Blue/W25 Green/W44 Red,S12 Red/S25 White/W26 Yellow/W41 Yellow/W42 Yellow/W43 Yellow/W47 Blue,S1 Yellow/S2 Red/S3 Yellow/S14 Red/S15 Blue/W22 Blue/W27 Red,S4 Purple/S5 Orange/S6 Green/S13 Blue/W48 Blue,S27 300/S28 300/S29 300/S30 300/S32 300/W31 420 24/W32 400 102013.11.08 00:09:33.403 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 00:09:33.403 Config for RomName matahari exists in LedControl data. Updating cabinet and config.2013.11.08 00:09:33.403 Table config loading finished2013.11.08 00:09:33.403 Pinball parts loaded2013.11.08 00:09:33.403 Starting processes2013.11.08 00:09:33.403 Initializing cabinet2013.11.08 00:09:33.403 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 00:09:33.403 Updater thread for LedWiz 01 started.2013.11.08 00:09:33.403 Cabinet initialized2013.11.08 00:09:33.403 Framework initialized.2013.11.08 00:09:33.403 Have fun! 2013.11.08 00:10:32.073 Finishing framework2013.11.08 00:10:32.073 Finishing cabinet2013.11.08 00:10:33.103 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 00:10:33.103 Cabinet finished2013.11.08 00:10:33.103 Duration statistics:2013.11.08 00:10:33.103 OutputControllers - LedWiz2013.11.08 00:10:33.103 - LedWiz 01 OnOff updates, Values count: 2, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:10:33.103 - LedWiz 01 PWM updates, Values count: 02013.11.08 00:10:33.103 - LedWiz 01 update calls, Values count: 68, Total: 10.0ms, Avg.: 147.0µs, Min.: 0ns, Max.: 10.0ms2013.11.08 00:10:33.103 Pinball - Alarm calls2013.11.08 00:10:33.103 - Alarm calls, Values count: 02013.11.08 00:10:33.103 - Interval Alarm calls, Values count: 02013.11.08 00:10:33.103 Pinball - Table element update calls2013.11.08 00:10:33.103 - EMTable, Values count: 02013.11.08 00:10:33.103 - GetMech, Values count: 02013.11.08 00:10:33.103 - GIString, Values count: 02013.11.08 00:10:33.103 - Lamp, Values count: 36, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:10:33.103 - LED, Values count: 400, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:10:33.103 - Mech, Values count: 02013.11.08 00:10:33.103 - Score, Values count: 02013.11.08 00:10:33.103 - ScoreDigit, Values count: 02013.11.08 00:10:33.103 - Solenoid, Values count: 2, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:10:33.103 - Switch, Values count: 2, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 00:10:33.103 - Unknown, Values count: 02013.11.08 00:10:33.103 DirectOutput framework finished.2013.11.08 00:10:33.103 Bye and thanks for using! Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted November 7, 2013 Content Provider Share Posted November 7, 2013 That's good, Can you try again with the latest revision, i eliminated some errors already, please clean the log and send it again Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 ---------------------------------------------------------------------------------2013.11.08 01:02:49.407 DirectOutput Logger initialized2013.11.08 01:02:49.407 DirectOutput Version 0.6.5050.39165 as of 2013.10.29 21:452013.11.08 01:02:49.407 Debug: Writting of debug log messages is enabled2013.11.08 01:02:49.407 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 01:02:49.407 Loading Pinball parts2013.11.08 01:02:49.407 Loading script files2013.11.08 01:02:49.407 Script files loaded2013.11.08 01:02:49.407 Loading cabinet2013.11.08 01:02:49.407 No cabinet config file loaded. Will use AutoConfig.2013.11.08 01:02:49.407 Cabinet auto configuration started2013.11.08 01:02:49.547 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 01:02:49.547 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 01:02:49.547 Cabinet auto configuration finished2013.11.08 01:02:49.547 Cabinet loaded2013.11.08 01:02:49.547 Loading table config2013.11.08 01:02:49.547 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 01:02:49.547 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName kingsandqueens2013.11.08 01:02:49.563 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 01:02:49.625 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 01:02:49.625 Config for RomName kingsandqueens exists in LedControl data. Updating cabinet and config.2013.11.08 01:02:49.641 Table config loading finished2013.11.08 01:02:49.641 Pinball parts loaded2013.11.08 01:02:49.641 Starting processes2013.11.08 01:02:49.641 Initializing cabinet2013.11.08 01:02:49.641 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 01:02:49.641 Updater thread for LedWiz 01 started.2013.11.08 01:02:49.641 Cabinet initialized2013.11.08 01:02:49.656 Framework initialized.2013.11.08 01:02:49.656 Have fun! 2013.11.08 01:03:10.924 Finishing framework2013.11.08 01:03:10.934 Finishing cabinet2013.11.08 01:03:11.964 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 01:03:11.964 Cabinet finished2013.11.08 01:03:11.964 Duration statistics:2013.11.08 01:03:11.964 OutputControllers - LedWiz2013.11.08 01:03:11.964 - LedWiz 01 OnOff updates, Values count: 3, Total: 0ns, Avg.: 0ns, Min.: 0ns, Max.: 0ns2013.11.08 01:03:11.964 - LedWiz 01 PWM updates, Values count: 1, Total: 62.4ms, Avg.: 62.4ms, Min.: 62.4ms, Max.: 62.4ms2013.11.08 01:03:11.964 - LedWiz 01 update calls, Values count: 3, Total: 93.6ms, Avg.: 31.2ms, Min.: 0ns, Max.: 78.0ms2013.11.08 01:03:11.964 Pinball - Alarm calls2013.11.08 01:03:11.964 - Alarm calls, Values count: 02013.11.08 01:03:11.964 - Interval Alarm calls, Values count: 02013.11.08 01:03:11.964 Pinball - Table element update calls2013.11.08 01:03:11.964 - EMTable, Values count: 02013.11.08 01:03:11.964 - GetMech, Values count: 02013.11.08 01:03:11.964 - GIString, Values count: 02013.11.08 01:03:11.964 - Lamp, Values count: 02013.11.08 01:03:11.964 - LED, Values count: 02013.11.08 01:03:11.964 - Mech, Values count: 02013.11.08 01:03:11.964 - Score, Values count: 02013.11.08 01:03:11.964 - ScoreDigit, Values count: 02013.11.08 01:03:11.964 - Solenoid, Values count: 02013.11.08 01:03:11.964 - Switch, Values count: 02013.11.08 01:03:11.964 - Unknown, Values count: 02013.11.08 01:03:11.964 DirectOutput framework finished.2013.11.08 01:03:11.964 Bye and thanks for using! Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 I just upped to 5053(released version and now this is log.... ---------------------------------------------------------------------------------2013.11.08 01:29:11.669 DirectOutput Logger initialized2013.11.08 01:29:11.669 DirectOutput Version 0.6.5053.22548 as of 2013.11.01 12:312013.11.08 01:29:11.669 Debug: Writting of debug log messages is enabled2013.11.08 01:29:11.669 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml2013.11.08 01:29:11.669 Loading Pinball parts2013.11.08 01:29:11.669 Loading script files2013.11.08 01:29:11.669 Script files loaded2013.11.08 01:29:11.669 Loading cabinet2013.11.08 01:29:11.669 No cabinet config file loaded. Will use AutoConfig.2013.11.08 01:29:11.669 Cabinet auto configuration started2013.11.08 01:29:11.809 Detected and added LedWiz Nr. 1 with name LedWiz 012013.11.08 01:29:11.809 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 12013.11.08 01:29:11.809 Cabinet auto configuration finished2013.11.08 01:29:11.809 Cabinet loaded2013.11.08 01:29:11.809 Loading table config2013.11.08 01:29:11.809 Warning: No table config file found. Will try to load config from LedControl file(s).2013.11.08 01:29:11.809 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName kingsandqueens2013.11.08 01:29:11.809 Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini2013.11.08 01:29:11.872 1 directoutput.ini or ledcontrol.ini files loaded.2013.11.08 01:29:11.872 Config for RomName kingsandqueens exists in LedControl data. Updating cabinet and config.2013.11.08 01:29:11.903 Table config loading finished2013.11.08 01:29:11.903 Pinball parts loaded2013.11.08 01:29:11.903 Starting processes2013.11.08 01:29:11.903 Initializing cabinet2013.11.08 01:29:11.903 LedWiz Nr. 01 initialized and updater thread initialized.2013.11.08 01:29:11.903 Updater thread for LedWiz 01 started.2013.11.08 01:29:11.903 Cabinet initialized2013.11.08 01:29:11.919 Framework initialized.2013.11.08 01:29:11.919 Have fun! 2013.11.08 01:29:34.847 Finishing framework2013.11.08 01:29:34.857 Finishing cabinet2013.11.08 01:29:35.887 LedWiz Nr. 01 finished and updater thread stopped.2013.11.08 01:29:35.887 Cabinet finished2013.11.08 01:29:35.887 DirectOutput framework finished.2013.11.08 01:29:35.887 Bye and thanks for using! Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted November 7, 2013 Content Provider Share Posted November 7, 2013 no more errors on the logs, but still not working? Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 no but I did get baseball working! well slings, bumpers and flippers. no rgb's other than undercab is that the way that table is? I had to comment out some lines in the baseball script to get it working Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 it doesn't make any sense. Link to comment Share on other sites More sharing options...
randr Posted November 7, 2013 Author Share Posted November 7, 2013 for baseball I had to comment out DOF at beginning of script gave error. Link to comment Share on other sites More sharing options...
Content Provider bent98 Posted November 7, 2013 Content Provider Share Posted November 7, 2013 Bent98, What do the E versions of the tables give you? I've been using DOF for the last 2 months and everything (shaker/gear/strobe/lights) worked fine, am I missing something by not using these tables? Z EM Tables, Originals, and SS tables that have objects that can't be mapped require an "E" Statement to make them work. Tables in the dropbox are modified by me and Arngrim in conjunction with my configs to get forcedeedback on those tables. https://www.dropbox.com/sh/or6d5uqra5d6tmu/W-qHvIasiu Link to comment Share on other sites More sharing options...
Content Provider swisslizard Posted November 7, 2013 Content Provider Share Posted November 7, 2013 Can you please play a game of AbraCadabra and a game of Baseball and post the logs. Maybe that will help to find the reason why one table is working and the other not. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now