Content Provider Redrum Posted May 4, 2023 Content Provider Share Posted May 4, 2023 Hello, startet a new project. Just started so a long way to go. Regards Sascha Link to comment Share on other sites More sharing options...
naboodiver Posted May 7, 2023 Share Posted May 7, 2023 Looks fantastic so far. You are a master of colorization. Look forward to seeing your progress. Link to comment Share on other sites More sharing options...
Chesco Posted May 8, 2023 Share Posted May 8, 2023 Congratulations.... Good job and too much patience. Link to comment Share on other sites More sharing options...
Content Provider Redrum Posted July 4, 2023 Author Content Provider Share Posted July 4, 2023 Hello, made some progress and uploaded a short gameplay video: Will upload the files soon. Regards Sascha Link to comment Share on other sites More sharing options...
dzorbas Posted July 18, 2023 Share Posted July 18, 2023 This will be excellent! It will be so much easier to work with this than the current method that is being used for MET! Thanks for taking this on! Link to comment Share on other sites More sharing options...
Chesco Posted October 14, 2023 Share Posted October 14, 2023 One question for @lucky1... Display is activated and has Firmware Pin2dmd ColorPrism 4.52. MicroSD has the 3 files (fsq, pal and key) but don't works. Display is a ST32 based on V3 Nucleo from PinballSP. This colorization works with Nucleo V3? Greetings. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted October 14, 2023 Content Provider Share Posted October 14, 2023 1 hour ago, Chesco said: One question for @lucky1... Display is activated and has Firmware Pin2dmd ColorPrism 4.52. MicroSD has the 3 files (fsq, pal and key) but don't works. Display is a ST32 based on V3 Nucleo from PinballSP. This colorization works with Nucleo V3? Greetings. Is pal storage set to flash ? Which cpu type is mounted ? Link to comment Share on other sites More sharing options...
Chesco Posted October 14, 2023 Share Posted October 14, 2023 CPU type? Display has Pin2dmd Firmware, but is a Nucleo V3 (DMD ST32). Link to comment Share on other sites More sharing options...
Chesco Posted October 14, 2023 Share Posted October 14, 2023 Pal Storage: same result with Ram and flash. Link to comment Share on other sites More sharing options...
Chesco Posted October 14, 2023 Share Posted October 14, 2023 Metallica V 1.80.0 SYS 1.93.0 HDW 2 Link to comment Share on other sites More sharing options...
Chesco Posted October 14, 2023 Share Posted October 14, 2023 CPU from Display is this: https://ibb.co/Sm00NnR Link to comment Share on other sites More sharing options...
Chesco Posted October 25, 2023 Share Posted October 25, 2023 The files have been installed on a Pin2dmd EVO and the result is SPECTACULAR. Congratulations!!! Link to comment Share on other sites More sharing options...
dzorbas Posted October 26, 2023 Share Posted October 26, 2023 I had the original colourization installed on my MET that required you to patch the Stern software and have an additional serial cable installed. The colour was very good as it was but I thought I would give Redrum's files a shot. Of course there are differences between the two but the Redrum files are excellent! And as I mentioned in a previous post, this is much easier to deal with. For someone like me who sells PIN2DMD displays, this will make it easier to support. And for anyone that purchases a PIN2DMD display for their game, installation becomes very simple. Great job on this! Thanks for taking on this project! Link to comment Share on other sites More sharing options...
Content Provider Redrum Posted November 29, 2023 Author Content Provider Share Posted November 29, 2023 I am again searching for some records from the premium model, especialy from the coffin mode. May someone is able to record and send it to me. Kind Regards Sascha Link to comment Share on other sites More sharing options...
mbt Posted December 17, 2023 Share Posted December 17, 2023 Dear Sascha, So far I have used the old method of coloring the Metallica via Pin2DMD Modified software + serial cable Now I tried using your color Pinball machine flashed with original software and the PAC file from https://vpuniverse.com/files/file/15292-metallica/?changelog=0 copied to the mini SD card Unfortunately without success, colors are there, but not as they should be. Colors are totally confused Pin2DMD is an EVO128x32 Rev 1.1 Firmware 4.52 Stern SAM Do I need another file or do you have an idea what it could be? PS: When I use the SD card with the old files (pal, key, dat) everything is displayed in black and white Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted December 17, 2023 Content Provider Share Posted December 17, 2023 13 minutes ago, mbt said: Do I need another file or do you have an idea what it could be? PAC is only for virtual pinball ! Get in contact with the author for real pin files. Link to comment Share on other sites More sharing options...
mbt Posted December 17, 2023 Share Posted December 17, 2023 Thanks for info Because of the game play video above I was thinking it work Link to comment Share on other sites More sharing options...
Pinballhungary Posted March 21 Share Posted March 21 On 7/4/2023 at 10:06 PM, Redrum said: Hello, made some progress and uploaded a short gameplay video: Will upload the files soon. Regards Sascha Hello ! I have one metallica premium, and i search the files to mtallica. I have one pin2dmd, and I wanna fill up the files. Its free? I have some pinballs, need the colorized files. thanks ! Karesz from Hungary Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now