hauntfreaks Posted December 3, 2022 Share Posted December 3, 2022 View File Godzilla (Sega-Stern mash-up) v3.0 Godzilla (Sega-Stern mash-up) v3.0 this is a modded version of @marty02 Sega-Stern mash-up or Godzilla this again is a table i've been messing with from it initial release list of some of the mods: GI Shadows Updated Lighting Mecha Godzilla 3D model Building 3D model Flying Saucer 3D model LE Apron Image lite Physics Rear Wall Routed Playfield Holes with Primitives New Hit-Targets Remastered Playfield image Side-Blade Images Materials Submitter hauntfreaks Submitted 12/03/2022 Category VPX - Pinball Tables Link to comment Share on other sites More sharing options...
MikeDASpike Posted December 6, 2022 Share Posted December 6, 2022 Having issues with the flippers. They both react fast, but sometimes stays up and need a repress of the button It also happens when using the keyboard (so not has to do with my buttons as wel) But I really like what you did with this table ! Link to comment Share on other sites More sharing options...
Cliffy Posted December 6, 2022 Share Posted December 6, 2022 6 minutes ago, MikeDASpike said: Having issues with the flippers. They both react fast, but sometimes stays up and need a repress of the button It also happens when using the keyboard (so not has to do with my buttons as wel) But I really like what you did with this table ! Hit F1, check Cabinet Mode. It's a B2S thing Link to comment Share on other sites More sharing options...
MikeDASpike Posted December 6, 2022 Share Posted December 6, 2022 1 minute ago, Cliffy said: Hit F1, check Cabinet Mode. It's a B2S thing my pinmame is by default on cabinet mode. Just checked and it is checked as well, Still have the flipper issue Link to comment Share on other sites More sharing options...
Cliffy Posted December 6, 2022 Share Posted December 6, 2022 Just now, MikeDASpike said: my pinmame is by default on cabinet mode. Just checked and it is checked as well, Still have the flipper issue I say its a b2s thing but I've also found it can be a dmddevice thing. Try renaming the b2s so it doesn't start and see if it persists Link to comment Share on other sites More sharing options...
MikeDASpike Posted December 6, 2022 Share Posted December 6, 2022 (edited) 2 hours ago, Cliffy said: I say its a b2s thing but I've also found it can be a dmddevice thing. Try renaming the b2s so it doesn't start and see if it persists Yeah, You said that it is a b2s thing, but thought for f1 it is the pinmame dialog. Sorry that I misunderstood. Yes, If I turned off the DDB2 for this table, the flippers works like a charm. Never seen this lately Thanks @Cliffy for pointing me. It was using the Original godzilla Directb2s file instead of Marty's directb2s. Renamed the file to table name and flippers works. Edit: downloaded Hxauntfreeks his dmd and works fine as well. Thanks. Really fun table Edited December 6, 2022 by MikeDASpike Link to comment Share on other sites More sharing options...
DanLShane Posted December 6, 2022 Share Posted December 6, 2022 7 hours ago, MikeDASpike said: Edit: downloaded Hxauntfreeks his dmd and works fine as well. Thanks. Really fun table Love those full DMD B2S creations! Makes my backglass feel so much bigger. Link to comment Share on other sites More sharing options...
LancieD Posted December 8, 2022 Share Posted December 8, 2022 Hi guys I am a newbie extreme. I have the earlier version of this table. I would like to upgrade to this one. Do I just download unzipp and replace existing Table in my Tables folder?? Link to comment Share on other sites More sharing options...
Cliffy Posted December 8, 2022 Share Posted December 8, 2022 1 hour ago, LancieD said: Hi guys I am a newbie extreme. I have the earlier version of this table. I would like to upgrade to this one. Do I just download unzipp and replace existing Table in my Tables folder?? Yes download, unblock, unzip to your tables game folder and it will sit beside the one you have now since its most likely named differently Link to comment Share on other sites More sharing options...
LancieD Posted December 9, 2022 Share Posted December 9, 2022 OK interesting I thought this replaced the earlier version. So basically it would be a another game altogether. Link to comment Share on other sites More sharing options...
Cliffy Posted December 9, 2022 Share Posted December 9, 2022 1 hour ago, LancieD said: OK interesting I thought this replaced the earlier version. So basically it would be a another game altogether. yep Link to comment Share on other sites More sharing options...
defiance187 Posted December 14, 2022 Share Posted December 14, 2022 I accidently turned the volume down with key 9 how do I turn it back up? It says the green button is volume up but I can't figure out what button that is. Link to comment Share on other sites More sharing options...
outhere Posted December 14, 2022 Share Posted December 14, 2022 36 minutes ago, defiance187 said: I accidently turned the volume down with key 9 how do I turn it back up? It says the green button is volume up but I can't figure out what button that is. Go to the top of this website Under Tutorials for info on number of Balls per game and Adjust volume https://www.vpforums.org/ Link to comment Share on other sites More sharing options...
Tikimaster Posted December 14, 2022 Share Posted December 14, 2022 1 hour ago, defiance187 said: I can't figure out what button that is. 8? Don´t have the table, but 8 and 9 are standard.. Link to comment Share on other sites More sharing options...
defiance187 Posted December 14, 2022 Share Posted December 14, 2022 Not 8. The table controls on this are not standard. 9 is down. 7 opens the operator menu and select items in it. None of the number keys work for volume up. Link to comment Share on other sites More sharing options...
outhere Posted December 14, 2022 Share Posted December 14, 2022 For me 7 opens the operator menu and 8 is volume up & 9 is volume down, You have to use #9 First to Activate volume control Link to comment Share on other sites More sharing options...
defiance187 Posted December 15, 2022 Share Posted December 15, 2022 I'll double check when I get home from work but I think I pressed 8 right after I realized 9 was turning it down. Link to comment Share on other sites More sharing options...
defiance187 Posted December 15, 2022 Share Posted December 15, 2022 This was the solution. I could have sworn I tried that, but I guess not. Thanks Link to comment Share on other sites More sharing options...
PunkRockDave Posted February 18, 2023 Share Posted February 18, 2023 I downloaded and installed this version a few times as well as the other Mashup version and I am experiencing the playfield shaking like it is being nudged like crazy when the ball interacts with certain objects. I have not noticed this happening in any of the videos I have seen of people playing the table. I am wondering if this is expected behavior or is there something I need to do to stop this. It is kind of cool at first but then gets a little tough to watch especially in the multi-ball. thanks PRD Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now