Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 2nd, the 16pin ribbon goes from 1 HUB75 port (#1 or #2 is up to you). The other end to RIGHT dmd INput. Then the 2nd ribbon goes from the RIGHT dmd OUT to the LEFT DMD IN! The power Y cable for the dmd goes to each dmd. Power source for the dmd must be a 5V min. 5A power supply. NOT power from USB! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 3rd, power for the Shield and STm comes over the microUSB cable with the power source jumper in 1-2 closed (was default on delivery).Thats all for the Hardware.I will upload some new pictures from my DMD backside, to show how the cables are connected. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 Picture are uploaded! DMD front: DMD Back: DMD back RIGHT side: DMD back MIDDLE: DMD back LEFT side: STm conencted to the rev 1.3 Shield: (is my TEST board, missed 1 HUB75 header and a different PWR source) for more help, post here or write me a message. Sascha Link to comment Share on other sites More sharing options...
krazyscotsman Posted December 24, 2015 Share Posted December 24, 2015 UncleSash - Thanks for the detailed information! Truly EXCELLENT! I forgot that I needed the 5v 5AMP power supply. I guess I'll have to get one before I can fully test. In the mean time, I will update the firmware and drivers for the DMD. Thanks again for such an excellent product and your support! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 When you going to order one. Take a 10Amp 5V DC power supply. Just in case. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 Like on of these styles: http://www.ebay.com/ulk/itm/261912469256 Or maybe: Almost the same price but US seller! http://www.ebay.com/ulk/itm/201195896777 Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 24, 2015 Author Content Provider Share Posted December 24, 2015 UncleSash - Thanks for the detailed information! Truly EXCELLENT! I forgot that I needed the 5v 5AMP power supply. I guess I'll have to get one before I can fully test. In the mean time, I will update the firmware and drivers for the DMD. Thanks again for such an excellent product and your support! You are very welcome! And everybody else also! A merry christmas to all of you! Link to comment Share on other sites More sharing options...
krazyscotsman Posted December 24, 2015 Share Posted December 24, 2015 GOT IT WORKING! I used a molex connector from my computer power supply to power the DMD. This is the same computer that I'm going to use to power my virtual pinball cabinet. So using the molex is a great way to keep things nice and clean in the cabinet. Looks great. Thanks so much to all involved and the support. Now to figure out how to make the DMD work with tables. I've got things working with b2s but didn't have a DMD. So, that's my next thing to do. Thanks again for the help everyone. Link to comment Share on other sites More sharing options...
Rappelbox Posted December 25, 2015 Share Posted December 25, 2015 Start a Table, click on dmd, press f1, select pin2dmd, done Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 27, 2015 Author Content Provider Share Posted December 27, 2015 Hello together. Here is a small Update for Round #4: We are working on a rev 2.0 Shield (EU & US)! Right now it looks really good. But we need a little bit more time to get the final release. We probably order in 1-2 weeks the first boards from the PCB manufacturer. I hope that is OK for you?! More Updates are coming in the next Days. Best regards Sascha Link to comment Share on other sites More sharing options...
martymoose69 Posted December 27, 2015 Share Posted December 27, 2015 can i put down an order for a package E please Link to comment Share on other sites More sharing options...
mcer Posted December 29, 2015 Share Posted December 29, 2015 Hi good afternoon, I am interested 4 packages "C" for real pinball. I must add SPIs readers ?. What is the cost of shipping to Miami - Florida. Thanks for your time. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 30, 2015 Author Content Provider Share Posted December 30, 2015 Usps first class medium flat rate box = 13.00 USD Plus the sets. I send you a PN the next days with more information. I'm on the road till friday. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted December 30, 2015 Author Content Provider Share Posted December 30, 2015 can i put down an order for a package E please Also a PN in the next days for you.... Link to comment Share on other sites More sharing options...
Raysco Posted January 1, 2016 Share Posted January 1, 2016 Hi, Can I put down an order for package "E" please. Posted to Brisbane Australia ;-) Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 1, 2016 Author Content Provider Share Posted January 1, 2016 Update for rev 2.0 Shields: We have to many Problems with the new Design and it don´t help to fix anything. Update for Round #4: There are 14 Shields on the PreOrder, at this time. With this Number, I think is it Time to Order rev 1.3 Boards for Round 4. The batch 4 is going to have 30 pcs! That there is a small reserve for other Pin2DMD Fans to get a Shield very fast. For User with Package "D, E or F": I will send you an message with the 20.00 USD PreCharge for the STm Controller in the next Days (after I placed the PCB order). HAPPY NEW YEAR 2016! Sascha Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 2, 2016 Author Content Provider Share Posted January 2, 2016 Rev 1.4 Order is placed... 30 pcs! changelog from 1.3 to 1.4: EXT Power Screw Terminal AND EXT Power Pin Header Screw holes with 65mm distance (some distance as the screw holes in the DMD) PCB size is a little bit bigger Picture preview from Layout: Link to comment Share on other sites More sharing options...
guruguy Posted January 2, 2016 Share Posted January 2, 2016 If still available, please put me down for the most complete package for VP only (no real pinball use). Feel free to PM, I will pay complete in advance. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 2, 2016 Author Content Provider Share Posted January 2, 2016 Hello folks,I found a Shop with 1 GB micro SD Cards.This Cards working without any problems. At the moment, I have 6 pcs 1GB micro SD Cards in my Hands.But they are expensive.The price for one Card is: 2.50 USD (+ Shipping)Or 12.00 USD when someone takes all 6 (+ Shipping).When anybody else is interested in the Shop where I bought them, just PM me and I will send you the link.But it is still NOT guarantee that they will work every time.I ordered 3 times these kinds of SD Cards and all of them worked fine.regardsSascha Link to comment Share on other sites More sharing options...
djbrh Posted January 3, 2016 Share Posted January 3, 2016 Please put me down for a complete package in batch 4! --Donnie Link to comment Share on other sites More sharing options...
goesta Posted January 3, 2016 Share Posted January 3, 2016 Hello Uncle Sash, I would like to order packet D with the mounting legs. Or if this is not possible i would take the Complete one F. It will be used for a Virtual Pin, so i do not need a card reader right? Please send me the instructions for paying. Thank you! Link to comment Share on other sites More sharing options...
coyote Posted January 4, 2016 Share Posted January 4, 2016 Signe me up for an 'F' package, please! Link to comment Share on other sites More sharing options...
robm Posted January 4, 2016 Share Posted January 4, 2016 Can i please have 2 x 'Package F' please? I have quite a few real pinball machines (newer sterns and 90's bally williams), and have a friend who is far more technical than myself. With his knowledge and my machines we can test a few different options and he will have one for his machine, and one for me to swap around and trial Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 4, 2016 Author Content Provider Share Posted January 4, 2016 Can i please have 2 x 'Package F' please? I have quite a few real pinball machines (newer sterns and 90's bally williams), and have a friend who is far more technical than myself. With his knowledge and my machines we can test a few different options and he will have one for his machine, and one for me to swap around and trial Yes you can. PM comes to you in a few minutes Link to comment Share on other sites More sharing options...
darrenkemp1 Posted January 5, 2016 Share Posted January 5, 2016 Hi I would like to order package D please. USA Delivery. Please send me the instructions for paying. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.