[New VP10 Alert] Space Cadet Cabinet (nFozzy)

[LoadedWeapon]

View File

Space Cadet Cabinet (nFozzy)

---

1st thanks to JPSalas for all his amazing work and helping others! All thanks to him for the Original Remake in VPX

This is an old fav of mine and wanted to give it an update for the cab.

Updated Physics (nFozzy)

Updated Sounds (Fleep)

Updated Lighting 

Updated POV for VPX 10.8

If using cabinet mode make sure to name the .ini the same as the table name and place both in the tables folder.

Enjoy!

---

• Submitter
  LoadedWeapon
• Submitted
  02/07/25
• Category
  VPX - Pinball Tables

 

[bele2009]

Awesome upgrade on the physics.

 

I was having a blast until the ball jumped over the shooter lane and ended up on the apron ;-(

 

VPX Open GL 10.8.0 Beta Rev 2015 (6f63503)

[bele2009]

Upgraded to latest official 10.8 release... hapened again. This time the ball jumped over the left ramp and ended up on the apron again!

 

Hope this can be fixed. This table version is awesome 😉

 

Thanks

[laralala]

For the people having problems with the ball going off the playfield pretty often, it seems is has to do with the ball taking flight. Until someone that knows what they're doing comes along and fixes it, my quick and dirty solution was to add a "roof" over the lower part of the playfield for the ball to hit .

 

Instructions for those that need them:

 

Big disclaimer: I'm just a rando on the internet and I don't know what I'm doing or what are the implications of this modification. It seems to work fine for me, but YMMV.

1. Open the table in VPX editor.
2. On the panel on the bottom right,  the layers panel, uncheck and then re-check the root node labeled "Layers". This will show everything on the table.
3. Insert a wall element, by going to Insert > wall, or by clicking the wall icon on the panel on the left. Then click anywhere on the table. A square will appear where you clicked.
4. On the panel on the right, under the "Visuals" tab
   1. Set  "Top Height" to 65.
   2. Set "Bottom Height" to 61.
   3. Uncheck "Top Visible" and "Side Visible".
5. Change the shape of this square "roof" so it spans over the bottom part of the field. Don't get too close to the left ramp or the ball will hit it and won't go up. Also, mind the hole where the ramp drains.
   1. Select the square if not selected.
   2. You might have to zoom in with Ctrl + mouse wheel.
   3. There's a little circle at each corner of the square, you want to click and drag those so the roof has the shape you want.
   4. You can add more of these circles by right clicking along the a line where you want the new point (but always inside the shape), and selecting "Add Point".
6. Test and save.

 

Hope it helps somebody.

 

 

Edited November 25, 2025 by laralala