gech

View File Lego Pinball directB2S A backglass for Lego ¨Pinball. Submitter gech Submitted 01/29/2017 Category B2S Backglasses  

Rgb and magna buttons picture, the color change with the table and the magna button lite when nedded : i used those kind of leds https://fr.aliexpress.com/item/10-1000pcs-4-Pin-WS2812B-WS2812-LED-Chip-Heatsink-5V-5050-RGB-WS2811-IC-Built-in/32634454437.html?spm=2114.06020208.3.27.bIRFNe&ws_ab_test=searchweb201556_10,searchweb201602_4_10057_10056_10065_10037_10068_10055_10054_10069_301_10059_10058_10032_10073_10017_10072_10070_10060_10061_10052_10062_10053_10050_10051,searchweb201603_4&btsid=2d4d6fbb-857e-432c-a666-dfbe54e81c97 yep, the beacon mx isn't used because of the effects, strobe and flashers already filling the back board

My private config is published . You can now choose what effect to use in combos and can adjust the size, shape and color for the strobe and the size and shape for the back flasher. The beacon mx isn't used. The strobes mx shape can be adjusted directly in the tool. It corresponds to the classic strobe effect. The flasher can be adjusted as well and correspond to the 5 classic rgb flasher. The effects are special effect like the launch button or special flasher (like in afm, mm, bop...) Flipper and magna mx are the same as classic rgb but for addressable. The back pinballx mx is the effect used during the table choice in pinballx and can now be edited table by table.

Good work In addition as asked by rablack97 here is a copy of the french tutorial. https://dl.dropboxusercontent.com/u/98865673/Teensy.docx

Give me by MP the email and id you used to register. I will ask the admin to have a look.

Yep in french http://www.pincabpassion.net/t2935-tuto-teensy-controller

I took swisslizard, randr, and every ones (big thank you to all of you guys )work I found on the net and mixed em all with adding the updates and the shapes. The blanks are my job (not so much but a little) I added every flipper button mx. I am currently filling every Back flasher mx Strobe mx Back effect mx Right and left flasher mx (not every but a lot) Right and left effect mx (not every but a lot) Beacon mx will be done in a second time. (If I found time) We are in discutions with Arngrim to incorpore the shapes to the config tool and we shall have a discussion about the pbx mx. I also planned to add back flasher pbx mx using swisslizard's pinballx big line... When all this will be done, it will be (normally) public. It will be time to tutorial how to use those new lines (combo powa) and fill the blanks You just have to have a drink and wait a little

I am adding strobes to dof config tool .. just wait a week or two.

Maybe try to put the files in a folder instead of an archive. I had some issues solved that way

here is a new ini file with every tables present in config tool. I took Swiss's ini file in my private config and added the missing tables from 5 flasher conf. also added flipper button Mx. I used variables so as we can use the shapes The config used is port 1 back playfield Mx port 4 right playfield Mx port 7 left playfield Mx port 10 flipper button Mx https://dl.dropboxusercontent.com/u/98865673/directoutputconfig30.ini