Content Provider lucky1 Posted March 8, 2016 Content Provider Posted March 8, 2016 Hello, with version 2 of the PIN2DMD firmware we introduced a activation key. Here is a little instruction what to do. First of all you have to install V2 firmware following this instruction https://pin2dmd.com/installation/ After a successful update you should see the PIN2DMD logo together with a number on the display. Please send this number together with your forum member name and a donation for our charity project ( e.g. 10Euro per device but we also accept more ? and send it to me using the donation button in my signature. You will receive a activation file you either have to place in your pin2dmd.exe folder and start the tool without command line argument (gui mode) or copy it to your sd card. This file can also be used to register the pin2dmd editor Please ask further questions here. Thanks for your support Lucky1
fly Posted March 9, 2016 Posted March 9, 2016 I have two questions: 1. I already gave the pledge, now I have to pay again ?? 2. I have from you a few sets PIN2DMD whether each set must have a different activation code? Thanks
Content Provider lucky1 Posted March 9, 2016 Author Content Provider Posted March 9, 2016 Since you already have donated you have, depending on your donation, a certain number of activation keys for free. Send me your device number. Each device needs his own key.
AndersE Posted March 9, 2016 Posted March 9, 2016 Hmm i am still waiting for my pin2dmd that is supposed to be shipped last week, but i can get the key beforehand? What is new in fw v2 then?
Content Provider lucky1 Posted March 9, 2016 Author Content Provider Posted March 9, 2016 The number and the key is unique for each device. The changelog is in the first post here http://vpuniverse.com/forums/topic/2436-pin2dmd-colorprism-v20-firmware/
Content Provider lucky1 Posted March 14, 2016 Author Content Provider Posted March 14, 2016 Depends on the use. Just a few that came to my mind. For both usecases - use of pin2dmd editor for colorizing WPC, DataEast etc - ongoing development of features (currently working on speedup of output routine and color calculation) For virtual pins - fully supported from pinballX and UltraDMD For real pins - faster input routine - autosync - more machine types
ralampa Posted June 30, 2016 Posted June 30, 2016 Hi, I've already made my donation and I have two questions. 1: As may take the activation code? 2: that means I will get? thanks for the attention and greetings.
Content Provider lucky1 Posted June 30, 2016 Author Content Provider Posted June 30, 2016 more information on www.pin2dmd.com
antoniomauro Posted July 19, 2016 Posted July 19, 2016 hi, i've flashed firmware but i can't see the UID on dmd Only the beautiful logo...
Rappelbox Posted July 19, 2016 Posted July 19, 2016 If you used the actual firmware, just wait around 1 minute, after that, demo mode finishes and you'll see your uid.
MatthGyver Posted August 7, 2016 Posted August 7, 2016 Is it necessary to post here that we have made a donation ? If yes so I make a donation.
Content Provider lucky1 Posted August 7, 2016 Author Content Provider Posted August 7, 2016 No it is not necessary but during summer I ask for a little patience. Generation of the code may take a little bit longer due to activities in my other hobbies.
ggferolles Posted August 17, 2016 Posted August 17, 2016 Hello, I just made a 15$ PAYPAL donation to : [email protected] I'd like to get an activation for my STM, could you please contact me? Jerome
metwurcht Posted August 21, 2016 Posted August 21, 2016 hello donation to : [email protected] is done ! bye
antoniomauro Posted September 15, 2016 Posted September 15, 2016 Hi donation done!! transaction code: 78016153FY1970231
Recommended Posts
Archived
This topic is now archived and is closed to further replies.