Mechanical tilt bob in virtual pin cab

[PeterB]

So I installed a mechanical tilt bob on a TR2 creative arcade virtual pinball cabinet.  Their software uses some visual pinball x tables( I believe the vpx version is 3.7).  The Mystery:  I can't get the VPX software to somehow detect a tilt bounce back(when the tilt bob hits the other side it should be ignored.. I think that's what it is) I believe there's supposed to be like a 3 second delay before another tilt is supposed to be detected when the bob makes contact.  What's happening:  the tilt bob swings and hits the tilt basket a few times and I get the two warnings and a tilt right off.  I know mjrnet.org gave great advice on moving folders around(Here's how you can fix the shared script to accomplish this:

For VP 10.4 and later:

Go to your Visual Pinball program folder

Open the Scripts folder you find there

Find the file NudgePlugIn_mjrAccelAndTilt.vbs, and rename it to NudgePlugIn.vbs

For VP versions before 10.4:

Go to your Visual Pinball program folder

Open the Tables folder you find there

Download NudgePlugIn.vbs and place it in the Tables folder (make sure the filename is NudgePlugIn.vbs)).  I tried this although I wasn't able to download the second folder, I just renamed it. It didn't work.  Was wondering if that would fix the problem or if there is another way to get that tilt bob buffer.

 

Thank you for any advice!  I have included a picture of my vpx settings.

[Darkangel60]

Hi!

 

Sorry for the "necropost"... but I have exactly the same problem. My tilt bob swings heavily and hit the "basket" several times, giving me two warnings and a tilt right away. I know some tables can be configured in the rom settings to change the time it takes to give another warning but doesn't exists in all of them.

 

Any idea of how to solve the issue in a global way? Looks like it could be a very common problem but this is the only post I found about this issue.

[outhere]

40 minutes ago, Darkangel60 said:

Hi!

 

Sorry for the "necropost"... but I have exactly the same problem. My tilt bob swings heavily and hit the "basket" several times, giving me two warnings and a tilt right away. I know some tables can be configured in the rom settings to change the time it takes to give another warning but doesn't exists in all of them.

 

Any idea of how to solve the issue in a global way? Looks like it could be a very common problem but this is the only post I found about this issue.

Maybe some help http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=tilt

[Darkangel60]

Thanks a lot for the link. Seems that following the instructions about the nudge script fixed the triple tilt signal ;)