driver_x_one Posted December 17, 2023 Posted December 17, 2023 (edited) John Wick 10.8 on a fresh 10.8 Baller Install. The Playfield is stuck sideways and small, other than that it works great. I tried to open it in 10.8 and change the view like I did with Police Force 10.8, but as soon as I change one parameter and save it, such as the rotating it from 270 to 0, the table won't load. *** Am I supposed to adjust it with my buttons with that "on screen" POV menu? How do you access that? Can't wait to play the 10.8 JW on my OLED. Help!! *** Also, how do I access the Script so I can change line 44 to False/True? and fix the squished DMD? Edited December 17, 2023 by driver_x_one
tiger86 Posted December 17, 2023 Posted December 17, 2023 I have the exact same issue with the Police Force table.
OldCodger11 Posted December 25, 2023 Posted December 25, 2023 Try F12 and go through the selections there
designone Posted January 30, 2024 Posted January 30, 2024 I have been able to rotate the table but I cant make it save. I save thf table before I close the file and it saves the table. Then when I come back in its rotated again. I don't know how to get past this. Can someone post a pov with it rotated.
newjersey Posted February 1, 2024 Posted February 1, 2024 I had this problem too, a few weeks back. I couldn't get it right in the menu. Don't get me wrong it works just fine if you need to tweak a few values, but this is a whole other level. Then i decided to use the .ini from JP's IT v4.3 since it's the same table. Of course i don't know if you (or anyone) can use this, but these are my values: [TableOverride] ViewCabMode = 0 ViewCabScaleX = 1.000000 ViewCabScaleY = 1.290000 ViewCabScaleZ = 1.000000 ViewCabRotation = 270.000000 ViewCabPlayerX = 0.000000 ViewCabPlayerY = 0.000000 ViewCabPlayerZ = -450.000000 ViewCabLookAt = 7.000000 ViewCabFOV = 26.000000 ViewCabLayback = 60.000000
SuperRob Posted February 4, 2024 Posted February 4, 2024 Thank you for those settings, newjersey! As soon as I got over my fear of replacing that entire section with these, it worked like a charm. Really cool table!
Ethertrace Posted June 17, 2024 Posted June 17, 2024 On 2/1/2024 at 7:50 AM, newjersey said: [TableOverride] ViewCabMode = 0 ViewCabScaleX = 1.000000 ViewCabScaleY = 1.290000 ViewCabScaleZ = 1.000000 ViewCabRotation = 270.000000 ViewCabPlayerX = 0.000000 ViewCabPlayerY = 0.000000 ViewCabPlayerZ = -450.000000 ViewCabLookAt = 7.000000 ViewCabFOV = 26.000000 ViewCabLayback = 60.000000 Thanks, newjersey. Worked like a charm. That was driving me nuts.
Kailoht Posted June 2, 2025 Posted June 2, 2025 Im running into this screen orientation issue, could someone walk me through exactly what I need to do to fix this please? Im sort of new to all this, but know some basics.
robertms Posted June 2, 2025 Posted June 2, 2025 5 hours ago, Kailoht said: Im running into this screen orientation issue, could someone walk me through exactly what I need to do to fix this please? Im sort of new to all this, but know some basics. Are you playing on a cabinet? Make sure you have entered your playfield monitor dimensions in centimeters under VPX video settings: Then using the F12 menu select "Window" POV mode and press the launch button (enter key on a keyboard) . This will center and pre-adjust the table to your screen, then all you have to do is dial it in using the flipper/magna buttons. Don't forget to press the start button (1 key on keyboard) to save your settings in corresponding .ini file. Note: each screen in the F12 menu has to be saved independently by hitting the start key. Keep in mind all your tables will need to be adjusted individually, there is no one-size-fits-all adjustment as each table is built uniquely. Also, once you enter your screen dimensions in VPX video settings you'll need to re-visit all your installed tables and adjust accordingly.
Kailoht Posted June 3, 2025 Posted June 3, 2025 19 hours ago, robertms said: Are you playing on a cabinet? Make sure you have entered your playfield monitor dimensions in centimeters under VPX video settings: Then using the F12 menu select "Window" POV mode and press the launch button (enter key on a keyboard) . This will center and pre-adjust the table to your screen, then all you have to do is dial it in using the flipper/magna buttons. Don't forget to press the start button (1 key on keyboard) to save your settings in corresponding .ini file. Note: each screen in the F12 menu has to be saved independently by hitting the start key. Keep in mind all your tables will need to be adjusted individually, there is no one-size-fits-all adjustment as each table is built uniquely. Also, once you enter your screen dimensions in VPX video settings you'll need to re-visit all your installed tables and adjust accordingly. hi! yes, I'm playing in a cabinet, but I have a 32" OLED monitor for my playfield. Do I only input values for the Screen Width and Height? thank you for responding to help me with this!
robertms Posted June 3, 2025 Posted June 3, 2025 1 hour ago, Kailoht said: hi! yes, I'm playing in a cabinet, but I have a 32" OLED monitor for my playfield. Do I only input values for the Screen Width and Height? thank you for responding to help me with this! You put in the width and height for the viewable playfield (width=longer side, height=shorter side). Screen inclination is actually in degrees. The X, Y, Z are the player's position relative to the cabinet. I would enter at least the Z value (in cm), which is the distance from the front of playfield (near the lockbar) to the player's eyelevel, thus reflecting the height from which the player is watching the playfield.
izzthatright Posted February 18 Posted February 18 On 2/1/2024 at 8:50 AM, newjersey said: I had this problem too, a few weeks back. I couldn't get it right in the menu. Don't get me wrong it works just fine if you need to tweak a few values, but this is a whole other level. Then i decided to use the .ini from JP's IT v4.3 since it's the same table. Of course i don't know if you (or anyone) can use this, but these are my values: [TableOverride] ViewCabMode = 0 ViewCabScaleX = 1.000000 ViewCabScaleY = 1.290000 ViewCabScaleZ = 1.000000 ViewCabRotation = 270.000000 ViewCabPlayerX = 0.000000 ViewCabPlayerY = 0.000000 ViewCabPlayerZ = -450.000000 ViewCabLookAt = 7.000000 ViewCabFOV = 26.000000 ViewCabLayback = 60.000000 These settings still helping people in 2026. I could not figure out what was wrong with this table. Until I found this. So basically for anyone in the future, I opened up the table *.ini file after I saved table, and deleted everything under [tableoveride] and just pasted these settings there. Saved file and reopened table and wala, johnwick in his full screen and positioned right on play field. Now if I could figure out how to get text in dmd from looking so squished. Anyone?
trueanimus Posted February 28 Posted February 28 GOT IT... Ran Flex DMDUI.exe and saw that i was missing a .dll (must have been placed in another folder or didnt copy over) Reinstalled FlexDMD for the .dll file and that fixed it 😃
GetBent Posted March 29 Posted March 29 This still works perfectly! Thanks for the fix. This game is worth the trouble just for the fun and the pup pack!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now