Breaking Pin [40/32/17] - The Resurrection

[Lobotomy]

Back in 2011 I started my pinball project and came a long way (playable).
And then my wife and I wanted to buy a new house, so we did, and the project was put on hold.
We love the new house, but it turned out the former owner was not the best at fixing things the right way,

so the first thing i had to do was clean out the entire basement to the outer walls and redo it.
When i was done with the basement the inner ceiling started to collapse .

Anywho, 50000$ and two years later I'm back, finally with some spare time!

Here's the specs of my build:
 

Monitors:
=========
40" 16:9 LCD Fullhd Samsung 1080p - Playfield
32" 16:9 LCD HD Ready Samsung 720p - Backglass
17" 4:3 LCD Dell Monitor - DMD

Cabinet:
============
19 mm MDF
Twilight Zone Widebody measurements with a few adjustments for the 40" Playfield.
Ipac 2
5 Ultralux Chrome Buttons
2 + 2 RGB lit Clear Flipperbuttons with trueleaf switches
5 CREE Dome Flashes between PF and DMD (Maybe putting 5 on backbox later)

RGB lightstrips for Undercab light.
2 Strobe Panels.
10 Siemens 1BB41/1BB42 contactors.
Zeb's new Atx breakoutboard & Ledwiz with SMT Booster Board.

PC-setup:
=========

OS = Win 7 64 bit
CPU = AMD PHENOM II X4 965 BE 3.4GHZ
MB = ASUS M4A79XTD EVO 790X
GPU1 = 1x GTX 580 1536MB GGDR5
GPU2 = 1x ASUS GEFORCE GTX 460 DIRECTCU TOP V2 1GB DDR5
HDD = SanDisk SSD Extreme 120 GB SATA III, Sandforce SF-2200

SOUND = Logitech Z-340

[Lobotomy]

A quickrender of the sideart:

[DeeGor]

I fully understand where you're coming from regarding the new house.  It's the same reason my build is being delayed.

 

For some reason, the picture you linked to is not rendering.

[Lobotomy]

Hmmm, I'll try it on dropbox then =)

https://www.dropbox.com/s/pc0oxrx4u1niw39/breaking_Pin_Sideart.jpg
 

(The sideart is not finished, will ad more light reflection and so on)

[Cappzz]

that sideart looks great.

[aussieyoda]

Any chance you can post your final dimensions for the cab... I have the same screen setup 40:32:17 and would really like the measurements you went with in the end.