Samsung 3D Active Glasses SSG-5100GB

[Spacegoogie]

1st, Hello hope all is well!

 

2nd, for the Samsung 3D Active Glasses SSG-5100GB what else do I need to do in order to get these 3D glasses to work with VPX cabinet? I've tried different settings but nothing?

 

Thanks!

[ludovids]

My notes for using SSG-5100GB 3D glasses:

 

- Set VP 3D Stereo Output to TB (Top / Bottom), and check Use Y Axis option.

- Put TV in 3D mode Top + Bottom, then turn glasses on by holding power button for 2-3 secs. Should see
    1 blink then solid green.
- Turn glasses off: Hold power button for 2-3 secs. Should see 3 blinks then glasses turn
    off. Glasses will auto off after TV 3D is turned off.
- To reset glasses and clear any bluetooth pairing info:
  - Remove battery.
  - While press and hold power button, insert battery.
  - Should see blink green 2 secs, red 1 sec.
- To re-pair glasses with TV:
  - Hold power button until blinks green/red (discovery mode).
  - Hold glasses near TV. Lights solid green when paired and see message on TV.
- Continuous blinking indicates that the battery needs replacing.

 

Note however that using the glasses with a TV rotated for cabinet use is not ideal. To have the shuttering work as intended, you will need to use 1 lens from each of 2 pairs of rotated glasses (1 left lens and 1 right lens). To view unrotated TV image using 1 pair of glasses, set VP 3D Stereo Output to SBS (Side by Side), and uncheck Use Y Axis option.

Edited September 29, 2023 by ludovids

[Spacegoogie]

3 hours ago, ludovids said:

My notes for using SSG-5100GB 3D glasses:

 

- Set VP 3D Stereo Output to TB (Top / Bottom), and check Use Y Axis option.

- Put TV in 3D mode Top + Bottom, then turn glasses on by holding power button for 2-3 secs. Should see
    1 blink then solid green.
- Turn glasses off: Hold power button for 2-3 secs. Should see 3 blinks then glasses turn
    off. Glasses will auto off after TV 3D is turned off.
- To reset glasses and clear any bluetooth pairing info:
  - Remove battery.
  - While press and hold power button, insert battery.
  - Should see blink green 2 secs, red 1 sec.
- To re-pair glasses with TV:
  - Hold power button until blinks green/red (discovery mode).
  - Hold glasses near TV. Lights solid green when paired and see message on TV.
- Continuous blinking indicates that the battery needs replacing.

 

Note however that using the glasses with a TV rotated for cabinet use is not ideal. To have the shuttering work as intended, you will need to use 1 lens from each of 2 pairs of rotated glasses (1 left lens and 1 right lens). To view unrotated TV image using 1 pair of glasses, set VP 3D Stereo Output to SBS (Side by Side), and uncheck Use Y Axis option.

Thank you!