Valmarines Posted May 12, 2023 Posted May 12, 2023 Bonjour, Le lecteur micro SD wavshare ne fonctionne pas, la led numéro 1 reste toujours éteinte avec ou sans la carte micro SD, est-ce un problème avec le logiciel ou la carte nucleo F-429 ?le reste fonctionne bien sur un flipper si vous avez une idée n'hésitez pas.
Content Provider lucky1 Posted May 12, 2023 Content Provider Posted May 12, 2023 In english please ! Which shield pcb do you use ? 4.03 is only for chinese SD module. This one is for Waveshare https://github.com/lucky01/PIN2DMD/tree/master/hardware/DEPRECATED/V4 NUCLEO-144 WAVESHARE SD READER
Valmarines Posted May 12, 2023 Author Posted May 12, 2023 Merci de m'avoir répondu, j'ai connecté le module waveshare temporairement avec des câbles Dupont. Excusez mon ignorance, dois-je injecter un nouveau code dans la carte f-429 ?
Content Provider lucky1 Posted May 12, 2023 Content Provider Posted May 12, 2023 https://vpuniverse.com/forums/topic/4305-activation-pin2dmd/?do=findComment&comment=71259
Valmarines Posted May 12, 2023 Author Posted May 12, 2023 I still have the same problem despite version V2.J35.M26
Content Provider lucky1 Posted May 12, 2023 Content Provider Posted May 12, 2023 On 4/15/2023 at 10:47 PM, lucky1 said: The wires to the SD connector should be as SHORT as possible.
Valmarines Posted May 12, 2023 Author Posted May 12, 2023 I used 10cm wires. I'm thinking of changing the waveshare SD...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.