marco37 Posted March 15, 2023 Posted March 15, 2023 Hi @zedrummer, I currently have a ZEDMD (realDMD + ESP32) and among the 60 Pinball Tables (VPX) that are installed, only 1 does not display anything on the REALDMD (no LEDs lit up, black screen): Star Trek 25th anniversary. looks like no signal is getting through. On the Virtualdmd of this Table, everything works fine. The format/ratio of the dmd seems different from the others (128x16) (?). Is this the reason why nothing is displayed on the RealDMD (ZEDMD)? I tried to change some parameters in the DmdDevice.ini file, but it doesn't change anything. Any idea? Thx!
Content Provider zedrummer Posted March 16, 2023 Content Provider Posted March 16, 2023 Hello @marco37 and thanks I shamefully recognize that I only tested 128x32 and 192x64 roms and not the 128x16. I promise that it'll be fixed in the next 2 or 3 months. You don't imagine how much time I spend on all my coding every day, on Serum colorization format ATM, but on ZeDMD as often as possible.
marco37 Posted March 16, 2023 Author Posted March 16, 2023 Thank you, I know you are working hard, and I appreciate it! I have the wish to create the coloured rom in your format (serum) of this table (StarTrek 25th) with your software, and it would be great to be able to test it on ZEDMD. Good luck to you!
Content Provider zedrummer Posted March 16, 2023 Content Provider Posted March 16, 2023 Sure, I'll look at it soon
mk47 Posted May 21, 2023 Posted May 21, 2023 On 3/15/2023 at 11:57 PM, marco37 said: The format/ratio of the dmd seems different from the others (128x16) (?). Is this the reason why nothing is displayed on the RealDMD (ZEDMD)? Yes, that should be the reason. Thanks for reporting this issue. Ideally you create an issue at https://github.com/PPUC/ZeDMD/issues to remind me about it 😉 But it would be interesting to have on more information. Start a different table and put ZeDMD in debug mode ba press and hold the the RGB buton until some numbers become visible. Then start Star Trek. On the top right side, the resolution should be reported. Is it 126x16?
mk47 Posted May 21, 2023 Posted May 21, 2023 @marco37 here's an experimental build with 128x16 support: https://github.com/PPUC/ZeDMD/actions/runs/5039838766 I just adjusted some code but could not test it at the moment. But I'll do tomorrow.
mk47 Posted May 22, 2023 Posted May 22, 2023 I solved the issue for 128x16 ROMs. It is part of the 3.2.2 release: https://github.com/PPUC/ZeDMD/releases/tag/v3.2.2
marco37 Posted May 23, 2023 Author Posted May 23, 2023 I'm a little late in replying. It's really cool, thanks! I'm going to test this out tonight when I get home from work. So happy! Thx!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.