caderbyshire Posted March 2, 2023 Posted March 2, 2023 Hi, I have recently updated my firmware to v4.50 on my pin2dmd and also decided to take the plunge with flexdmd to replace ultradmd. All tables that I have installed on my cab that utilize ultradmd (now flexdmd) work fine but Goonies and IT that use flexdmd do not display on my pin2dmd. Any ideas why this is the case? Which are the best DMDdevice.dll files etc to use to get flexdmd to display on pin2dmd? Thanks Craig
Content Provider lucky1 Posted March 2, 2023 Content Provider Posted March 2, 2023 Those tables use most likely non DMD resolutions and therefore need downscaling. Did you try this version from here
caderbyshire Posted March 2, 2023 Author Posted March 2, 2023 Yes, tried those - still nothing on the Pin2DMD, show ok on virtual on monitor if I enable that.
Content Provider lucky1 Posted March 2, 2023 Content Provider Posted March 2, 2023 Is pin2dmd set to true for those tables or globally ?
caderbyshire Posted March 2, 2023 Author Posted March 2, 2023 Globally I think, well in the DMDdevice.ini file. How do you do it for a table?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.