Weak flippers in SLAMT1LT tables

[flipponzio]

Hello everybody. I have a problem with almost all SLAMT1LT version tables (with FP Physics Adjustment). Flippers are much weaker than they should be. Ball shots aren't powerful enough. I don't have this problem with all the other tables (for example in the ones with ZED Physics the flippers have the correct strength). Do I need to change some settings?

[sundogak]

On 1/6/2023 at 10:51 AM, flipponzio said:

Hello everybody. I have a problem with almost all SLAMT1LT version tables (with FP Physics Adjustment). Flippers are much weaker than they should be. Ball shots aren't powerful enough. I don't have this problem with all the other tables (for example in the ones with ZED Physics the flippers have the correct strength). Do I need to change some settings?

 

Assuming you have BAM setup correctly, for his tables prior to 2020 (roughly) then you have to make sure you have the correct XML physics file, and it is named the same as the table.  In the BAM XML folder are the physics XML files by version.  Copy the appropriate version from there and place where table is located making sure XML has same name as table.  Once you get to about 2020 tables then he switched to custom physics that were embedded in the table code, so no need to deal with the XML file.  If you did have an XML physics file than likely it is the incorrect physics version (i.e., using version 2.6 on a 2.3 table).  For example, The AC-DC "Ultimate Edition" 1.02 table uses physics 2.7.    Unfortunately, it isn't always clear cut but typically for SlamT1LTs tables they indicate version at bootup or in the code (not always, but place to start).