DOF works prperly but no output from ledwiz. Help needed.

[Gibson]

Hi,  I have a real nagging problem getting DOF to work with VPX. Everything installed, B2S works and DOF plugin works. Connected a Ledwiz clone. Work fine with Simpleledtest. I can control all the outputs just fine. But whatever I try, I can´t get the ledwiz to output any signal using VPX and DOF.

Using the DOF configtool I set the flippers and slingshots to output ports of the ledwiz. Saved the configfile in the proper DirectOutput folder.  But no signal from the ledwiz when starting VPX and flippering.  When I check the DirectOutput log file everything seems to work. ledwiz clone detected and initialized. When I disconnect the ledwiz and use the flipper I see in the logfile that it tried to send usb packets to Ledwiz nr4 (the default ledwiz clone) and failed. Allright. Because I disconnected the ledwiz. USB communication seems to work.

I checked by setting all the ledwiz outputs to ON using simpleledtest app. Leds are on. Starting VPX and launching the ball. Still ok. But the moment I push a flipper button all leds go OFF.

So it seems to me the Ledwiz is detected and communicating with DOF. But for some reason the DOF actions simply deactivate all outputs of the Ledwiz.  I have tried everything the last couple of days and an at a loss. Maybe I am just missing something. Any help greatly appreciated!  I´ll try to post some screenshots.

DirectOutput.log

[Gibson]

log file as image