dzorbas Posted June 27, 2022 Posted June 27, 2022 Hello folks, I have an EVO display that does not seem to be reading the data coming from a real pinball machine. The display is running the latest firmware and is fully activated. When I plug it into my Judge Dredd to test it, it just stays on the PIN2DMD logo screen and displays the mode as "Virtual Pinball". Even if I manually switch the setting to "Bally/Williams" it still does not display any game images. I've tested all the pins on the flat ribbon connector and get the expected results. I've factory reset the display and have reinstalled the firmware from scratch using my laptop. Nothing has fixed the behaviour. If anyone has any suggestions, I'm more than happy to test out any theories. I've built, activated and tested a lot of displays but I don't think I've seen one behave like this. I don't recall reading any previous posts with a similar issue. I apologize if someone has already addressed this previously and I missed it. Thanks in advance for any assistance. Dino Z.
Content Provider lucky1 Posted June 27, 2022 Content Provider Posted June 27, 2022 Run the input test like described here https://pin2dmd.com/#3 If all pins (except pin 9) are ok, check the connections from and to the LS123 IC1
Recommended Posts
Archived
This topic is now archived and is closed to further replies.