Banzaipinball Posted January 30, 2022 Share Posted January 30, 2022 Have an Evo Pin2dmd. The issue I am having is: when turned on, display is blank and never comes on, when machine is turned off and then back on, display fires up as expected. Any ideas. Thanks Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted January 30, 2022 Content Provider Share Posted January 30, 2022 Link to comment Share on other sites More sharing options...
Banzaipinball Posted January 30, 2022 Author Share Posted January 30, 2022 is the potential issue too much voltage or not enough, display is getting 14v Link to comment Share on other sites More sharing options...
Frankensteinowner Posted February 13, 2022 Share Posted February 13, 2022 I had something similar - when you power the machine up and it doesn't display anything, does the unit fire up when you press the reset button? Unfortunately, even as a qualified electronics engineer, I never got to the bottom of it. I'm going to put a circuit in from the display driver card reset as that works reliably (at the moment, I have a couple of wires coming out of the machine to reset the DMD 😞 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now