ainotenshi Posted June 24, 2021 Posted June 24, 2021 Hi guys, I tried to activate my DMD without success I followed all related topic but still not working correctly: Win 7 Pro Usb config in zadig I tried all USB mode for my PIN2DMD, nothing works Device/Activate in the program Pin2dmd_v4_Win64 ->"Device activation failed ! However, the DMD screen look to be "activated" but after a restart or something else it's simply go back do "not activated" ON the 32 bits version I have 'no key found for XXX'. The load config give me the proper fw 4.10 and the correct device ID I tried on all usb divers WINUSB , libusb, 32bits and 64 bits, admin mode. I change the USB cable same thing. I have no microsd card reader for the sd card activation too. No result :( If you have any idea, that would be great! Many thanks!
ainotenshi Posted June 24, 2021 Author Posted June 24, 2021 Tried on the MacOSX version of pin2dmd same result activation failed 😕
Content Provider lucky1 Posted June 24, 2021 Content Provider Posted June 24, 2021 Does the number on the screen match the number of the keyfile ?
ainotenshi Posted June 24, 2021 Author Posted June 24, 2021 Hi Lucky, well this is the only DMD waiting for activation so this I only have one licence key received for this DMD ID. This is what you mean ? No the keyfile number have a a totally different number. I tried right now to rename it, same result. Could it be the wrong key I received ?
Content Provider lucky1 Posted June 24, 2021 Content Provider Posted June 24, 2021 Renaming does not work. I checked my e-mails and sent you a new key.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.