dom69 Posted January 29, 2021 Share Posted January 29, 2021 Hello everyone, as Lucky authorized me, I wanted to put '' product by '' on the pcb. on the 128x16 I noticed by opening the brd that I did not have a cutout on it, then by opening the brd of the 192x64 I did not have all the screw holes. is it the same for you? Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted January 29, 2021 Content Provider Share Posted January 29, 2021 Never had this problem Link to comment Share on other sites More sharing options...
dom69 Posted January 29, 2021 Author Share Posted January 29, 2021 yet your Gerber is good. I will ask a friend that opens with his Eagle to try. and i tell you Link to comment Share on other sites More sharing options...
lololol Posted January 29, 2021 Share Posted January 29, 2021 hi, I just opened the brd with eagle and indeed the same concern at home. Link to comment Share on other sites More sharing options...
mvermant Posted January 29, 2021 Share Posted January 29, 2021 Link to comment Share on other sites More sharing options...
TeamPPAetios Posted January 29, 2021 Share Posted January 29, 2021 I've got the exact same problem than dom69. Here is what I've got with the BRD downloaded from Github Master The hole appears when simply redrawing the rectangle Here are the two files : 128x16.brd (from github) 128x16_m.brd (modified by myself) 128x16.brd 128x16_m.brd Link to comment Share on other sites More sharing options...
karlevis75 Posted January 30, 2021 Share Posted January 30, 2021 Good morning all, I've got the exact same problem than dom69 and TeamPPaetios. there is an inconsistency with the masks. Best regards. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted January 30, 2021 Content Provider Share Posted January 30, 2021 I think you are using a newer version of eagle than me. Could you please try this version 128x16.brd192x64.brd Link to comment Share on other sites More sharing options...
karlevis75 Posted January 30, 2021 Share Posted January 30, 2021 Thanks and I'm going to check. Link to comment Share on other sites More sharing options...
dom69 Posted January 30, 2021 Author Share Posted January 30, 2021 128x16_m.brd is ok for me. there remains the 192x64 Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted January 30, 2021 Content Provider Share Posted January 30, 2021 45 minutes ago, dom69 said: 128x16_m.brd is ok for me. there remains the 192x64 2 hours ago, lucky1 said: I think you are using a newer version of eagle than me. Could you please try this version 128x16.brd192x64.brd Link to comment Share on other sites More sharing options...
dom69 Posted January 30, 2021 Author Share Posted January 30, 2021 it's ok now for 128x16 and 192x64. thank you for being quick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.