dzorbas Posted November 23, 2019 Share Posted November 23, 2019 Guys, A buddy just sent me this picture of his Getaway. I've asked him to check cables to make sure everything is seated properly which he will do later. Has anyone experienced or seen something similar? I might have him plug in his original display to see if the same thing occurs. Any suggestions or help would be appreciated. Thanks! Dino Z. Link to comment Share on other sites More sharing options...
fly Posted November 23, 2019 Share Posted November 23, 2019 Try to pull the tape cables and put them back in, it helped me, I had the same problem Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted November 24, 2019 Content Provider Share Posted November 24, 2019 It is very unlikely caused by the EVO. Looks more like a problem with the pinball electronics. Link to comment Share on other sites More sharing options...
dzorbas Posted November 24, 2019 Author Share Posted November 24, 2019 Personally, I was thinking the same thing. He told me it stopped doing it a little later in the evening. My gut was telling me that it was either a loose cable or that his machine was doing something weird. I asked if he had shut down the game and turned it back on, which he said he did. The result was the same. At this point he says things are okay but I have asked him to troubleshoot and report back to me. I thought it might be useful to ask the forum in case someone else had a similar issue. Thanks to both of you for replying! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.