knightrdrx Posted June 29, 2019 Share Posted June 29, 2019 Hi I just installed Zeb's plug n play shaker, i followed his directions and installed dof for the first time. i have no other toys/lights. i don't have ledwiz as he said i don't need it. but i set # led devices to 4 and configured under device 4 like it says. even though his picture shows it as #5 for some reason. Windows detects the shaker. I don't know what to do with the 2 lines under 'update' in the config tool ''set lcp_apikey = your api key etc ,. i ignored that. if you are not familiar with his instructions...i opened the vpuniv.config account ,changed the settings to match his, save config, generate config, put tabllmappings into tables folder, rest of the zip into directout/config folder. I did nothing else. I opened led blinky to test as per the instructions and expected the motor to start and nothing happened. cab has wifi but i don't want to rely on it as it can cut in and out. I don't understand what happened? Can someone assist me please? What screenshots can i provide to help? Link to comment Share on other sites More sharing options...
outhere Posted June 29, 2019 Share Posted June 29, 2019 I've never install one of these but I was just looking at the directions When you try blinky was a shaker motor on the list Link to comment Share on other sites More sharing options...
knightrdrx Posted June 29, 2019 Author Share Posted June 29, 2019 hi, i see ledwiz-4 on the list. which is what i should see. i guess there's maybe a step missing not in the instructions as far as a config file goes. Link to comment Share on other sites More sharing options...
outhere Posted June 29, 2019 Share Posted June 29, 2019 I would definitely get a hold of Zeb's Link to comment Share on other sites More sharing options...
knightrdrx Posted June 29, 2019 Author Share Posted June 29, 2019 ok thanks Link to comment Share on other sites More sharing options...
knightrdrx Posted June 30, 2019 Author Share Posted June 30, 2019 it works. stupid me...the power supply was very slightly loose and i didn't see that the blue light wasn't on at the time i tested it. VPX scripts control the intensity of it right? Link to comment Share on other sites More sharing options...
outhere Posted June 30, 2019 Share Posted June 30, 2019 Good to see Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.