DMD for FX3 on 2.56 - DMD image scrambled/broken

[Dazz]

 

I've been trying to get FX3 finally installed on my setup.  I'm running firmware 2.56 and finally got FX3 to display on my Pin2DMD.  Unfortunately, the DMD seems to be really scrambled.  I'm going to roll back to 2.55 and test to see what happens.  Any other ideas as to why FX3 would be looking like this ?

[outhere]

I believe per lucky1 version 2.58 is a stable version

What version of frenzy are you using?

What does it look like if Display it on a monitor?

[lucky1]

Most likely not a firmware issue but a problem of freezy´s or settings of freezy´s 

Seems like it is not sending the frames correctly.

[Dazz]

Running Freezy 1.7.1.  If I display it on monitor using the virtual DMD it looks the same.

[slippifishi]

1 hour ago, Dazz said:

Running Freezy 1.7.1.  If I display it on monitor using the virtual DMD it looks the same.

You mean it looks broken on the monitor as well? Are you running any crazy/non-standard resolution, or using DSR or equivalent?

[Dazz]

Just now, slippifishi said:

You mean it looks broken on the monitor as well? Are you running any crazy/non-standard resolution, or using DSR or equivalent?

Nope, everything is standard.  Playfield is 1080p, BG and 3rd screen are 720p.

[Dazz]

BTW - I was able to fix this. Somehow the sizing of the DMD in FX3 reverted back to something else.  Changing it to 1040 272 in Pincab settings of FX3 fixed it.  Looks good.  Now just need to figure out why DOFLinx isn't launching when Windows 10 starts.

[outhere]

For me I never got windows 10 to start DOFLinx when launching as administor but it works with this batch file..
Put it with your DOFLinx and put a shortcut in windows 10 startup folder..

 

DOFLinxWindowsStartup.bat