clems80 Posted November 7, 2018 Posted November 7, 2018 Hello I have a problem following the installation of a pin2dmd, there are display bug, yet I tested with 3 different power supply (that of the pinball machine, a 5v 5a and a 5v 10a) and 4.6va 5.25v but exactly the same problem .. Someone has an idea? Thank you Video
clems80 Posted November 8, 2018 Author Posted November 8, 2018 same problem with a new sd card and the setting Gottlieb v1 v2 and v3
Content Provider lucky1 Posted November 8, 2018 Content Provider Posted November 8, 2018 Please make a picture of the controller board. Could be caused by cheap chinese discovery board clones. Did you test in other pinball machines ?
clems80 Posted November 8, 2018 Author Posted November 8, 2018 No test other pinball, Test new cable is ko : dmd display -> pin2dmd
clems80 Posted November 8, 2018 Author Posted November 8, 2018 Apparently it's a copy, I'll order an original .. The problem has to come from the ..
Pinballuser Posted November 8, 2018 Posted November 8, 2018 mind providing a link to the board you bought, so that others don't make the same mistake.
Content Provider lucky1 Posted November 8, 2018 Content Provider Posted November 8, 2018 So far all boards with a green headphone plug made problems.
clems80 Posted November 9, 2018 Author Posted November 9, 2018 It's been a long time since I bought it, probably on ebay ok I would not be having any more Thx Clement
clems80 Posted November 12, 2018 Author Posted November 12, 2018 now I find myself with a pin2dmd unusable, too well!
Content Provider lucky1 Posted November 12, 2018 Content Provider Posted November 12, 2018 Did you try with a original STM discovery board ?
clems80 Posted November 13, 2018 Author Posted November 13, 2018 I installed and configured the original stm, but did not know that I could test without the activation
clems80 Posted November 13, 2018 Author Posted November 13, 2018 here it does not light anymore! I will watch at noon I have to go to work!
Content Provider lucky1 Posted November 13, 2018 Content Provider Posted November 13, 2018 Did you install the firmware ?
clems80 Posted November 13, 2018 Author Posted November 13, 2018 I will flash the firmware again and we will see
clems80 Posted November 13, 2018 Author Posted November 13, 2018 firmware ok the pin2dmd works on the pc in mini-usb but not on power supply 5v connected to the card interface of pin2dmd
Content Provider lucky1 Posted November 13, 2018 Content Provider Posted November 13, 2018 2 minutes ago, clems80 said: firmware ok the pin2dmd works on the pc in mini-usb but not on power supply 5v connected to the card interface of pin2dmd from pin2dmd.com !! Note : Latest Discovery boards MB997D may need a ST-Link firmware update from here http://www.st.com/content/st_com/en/products/embedded-software/development-tool-software/stsw-link007.html
clems80 Posted November 13, 2018 Author Posted November 13, 2018 ok thank you, I'm doing this tonight
clems80 Posted November 13, 2018 Author Posted November 13, 2018 it's good with the firmware update it starts on the external power supply. the display bug disappeared with the original stm it lacks more than the activation of the official stm
Content Provider lucky1 Posted November 13, 2018 Content Provider Posted November 13, 2018 O.K. Problem solved. You should adjust the rgb sequence in the onscreen menu that the colors on the splash screen have red on the left and yellow white on the right.
clems80 Posted November 13, 2018 Author Posted November 13, 2018 ok thank you very much and how can I do little to activate this card instead of the other?
Content Provider lucky1 Posted November 14, 2018 Content Provider Posted November 14, 2018 You need either destroy the old one physically (e.g. drill a hole in the cpu) and send a picture of it or donate again. That is one reason why pin2dmd has a trial period, that you can test everything before making the donation.
clems80 Posted November 14, 2018 Author Posted November 14, 2018 omg I pierced the good: o. I'm kidding, here's the picture!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.